Electrical Discharge Machine Tools (Tools for Specific Machines) for sale, page 70

Rochester, New York, United States
Jan 30th

Wire EDM V-Block 1.5 X 5 X 5 (inch) Will hold up to a 3 inch diameter. 420 stainless steel (hardened 48-52RC) With - clamp - set up rail - stainless socket head cap screws - side rail (for standing block up or on its side) - (3) clamp screws The slotted screws are for M8 and M6 socket head caps screws they are machined 50 mm apart so these will work in any Wire EDM machine. Main Block is precision ground +/- .0002" flat/parallel

Wire edm v-block (multi-position)

Rochester, New York, United States
Jan 30th

Multi Position V-Block Will hold up to a two inch diameter Bottom Plate is .5 X 5 X 5 (inch) All Parts are 420 stainless steel and hardened to 48-52 RC Main V-Block can be set in three different positions. There is a straight rail that bolts to all four sides of the bottom plate for ease of removing the V-Block and setting back up. There is a low profile V-Block that can also be set in two different positions.All socket head cap screws (stainless) in picture are provided.

Ceramtech 0051354 .0108 edm wire guide bottoms

Peoria, Illinois, United States
Jan 30th

08 17C This item is surplus stock in like new condition. Please email any questions or requests for additional pictures before purchasing. International Buyers – Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.

Sodick a4r die sinker 3r edm / with fine sodick mark xi control. 30 amps

Huntington Beach, California, United States
Jan 30th

Up for Sale ! SODICK A4R DIE SINKER 3R EDM / WITH FINE SODICK MARK XI CONTROL. 30 AMPS This item is used and has been tested to be in good working condition.

Agie check -box 100d acc

Bensenville, Illinois, United States
Jan 30th

Used AGIE Check-box100 D ACC

1000 p.s.i. hpp.ft high pressure water pump for drill edm hole popper

Irvine, California, United States
Jan 30th

New edm filter 10 1/4" across by 13 1/2" tall free shipping

New Paris, Indiana, United States
Jan 30th

Yuasa intl 600-007 permanent magnetic chuck 4” x 7”

Phoenix, Arizona, United States
Jan 30th

All items are sold as is without warranty unless specifically stated in the posting. This does not mean that the unit doesn’t work, only that we have not tested or checked it out. This may also mean that we are not knowledgeable in this specific item.

System 3r 22.5mm capacity table mounting chuck less adjusters. inv 15474

Portland, Connecticut, United States
Jan 30th

System 3R 22.5mm Capacity table mounting chuck with fine center adjusters. missing 1 adjuster (Inv.15474)

System 3r 20 mm capacity table mounting chuck (inv.15472) (inv.15473)

Portland, Connecticut, United States
Jan 30th

System 3R 20 mm Capacity table mounting chuck with fine center adjusters. (Inv.15472) (Inv.15473)

System 3r rectangular electrode holder (inv.15496)

Portland, Connecticut, United States
Jan 30th

System 3R Rectangular Electrode Holder 1.654 x 4.732 Inches CAT 30 Very good condition (Inv.15496)

System 3r square electrode holder 7/8 square capacity (inv.15494-15495)

Portland, Connecticut, United States
Jan 30th

System 3R Square Electrode Holder: CAT 30 Approx. 7/8 square capacity Very good condition (Inv.15494-15495)

System 3r cat30 edm tool holder 22.5mm cap.( inv.15479)

Portland, Connecticut, United States
Jan 30th

System 3R CAT30 EDM Tool Hoder 22.5mm capacity with dual feed coolant manifold and Albrecht chuck (Inv15479)

System 3r cat 30 edm tool holder 22.5mm capacity (inv.15475)

Portland, Connecticut, United States
Jan 30th

System 3R CAT 30 EDM Tool Holder 22.5mm capacity with dual feed coolant manifold. In good used condition. (Inv15475)

2001 falcon chevalier model dt-168 portable electrical discharge machine edm

Huntington Beach, California, United States
Jan 30th

Up for Sale ! 2001 FALCON CHEVALIER MODEL DT-168 PORTABLE ELECTRICAL DISCHARGE MACHINE EDM YEAR 2001 MODEL DT-168 1 PHASE ALIC PORTABLE MAGNETIC BASE ALIC SPINDLE VOLTS 110 / 220V APMS 5.2 RPM 0850

Top! adjustable edm electrode holder / calibrating head for edm machine (b)

Hong Kong, China
Jan 30th

Charmilles andrews wire edm parts, new and used

Lewisville, Pennsylvania, United States
Jan 30th

Here is a lot of all the Charmilles Andrews parts I have. These were listed in (6) separate listings previously. There are (2) new capstan pulleys P/N 106534-001, (4) new carbide power brushes P/N 106462-001, (2) new hub shuttle level winder P/N 107103-002, (6) new felt pressure pads P/N 106607-002, and a bunch more parts shown in the pictures.

Copper tungsten sheet .030 x 1" x 8"

Hudson, New York, United States
Jan 30th

COPPER TUNGSTEN SHEETS GRADE 10-150. 1 X 8 WITH AN .030 THICKNESS

Charmilles 852476 apm u v

Anoka, Minnesota, United States
Jan 30th

working

Set of 2 paravis 7606109-8 d/43 r/b pallet plates

Peoria, Illinois, United States
Jan 30th

07 4000022908 2D This item is surplus stock in like new condition. 2-1/16"L X 1-3/4"W X 7/16"H Through holes 5/16", counterbore 1/2" X 3/8" depth Please email any questions or requests for additional pictures before purchasing. International Buyers – Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.