+ Post new Ad

End Mills Router & Drill Bits

The average price for current category was $57.55 last month.

There are 5807 ads in this category.

2 - SGS - 30123 -SER 1 3/16" Solid Carbide Square End MillS

2 - sgs - 30123 -ser 1 3/16" solid carbide square end mills

  • Colorado Springs, Colorado, United States
  • Jan 30th
2 - SGS - 30123 -SER 1 3/16" Solid Carbide Square End MillS Square End Mills; Mill Diameter (mm): 4.76; Mill Diameter (Inch): 3/16; Mill Diameter (Decimal Inch): 0.1875; Number of Flutes: 4; Material: Solid Carbide; Length of Cut (mm): 15.88 Mill Diameter (mm) 4.76 Mill Diameter (Inch) 3/16 Mill Diameter (Decimal Inch) 0.1875 Number of Flutes
2- SGS 38249 3CR 2 Flute CR Uncoated, 3/8" Cutting Diameter, 1" Cutting .030 RAD

2- sgs 38249 3cr 2 flute cr uncoated, 3/8" cutting diameter, 1" cutting .030 rad

  • Colorado Springs, Colorado, United States
  • Jan 30th
YOU ARE BIDDING ON A PAIR OF SGS 38249 3CR 2 Flute Corner Radius General Purpose End Mill, Uncoated, 3/8" Cutting Diameter, 1" Cutting Length, 3/8" Shank Diameter, 2-1/2" Length, 0.030" Corner Radius
SGS 38223 3CR 2 Flute Corner Radius .030 General Purpose End Mill, UncoateD

Sgs 38223 3cr 2 flute corner radius .030 general purpose end mill, uncoated

  • Colorado Springs, Colorado, United States
  • Jan 30th
SGS 38223 3CR 2 Flute Corner .030 Radius General Purpose End Mill, UncoateD
15 NEW 1/8" SHANK CARBIDE END MILLS. 4 FLUTE. USA MADE {E933}

15 new 1/8" shank carbide end mills. 4 flute. usa made {e933}

  • Mentor, Ohio, United States
  • Jan 30th
3 NEW SOLID CARBIDE ENDMILL 5/8" DIAMETER. 2 FLUTE. USA (Z402A)

3 new solid carbide endmill 5/8" diameter. 2 flute. usa (z402a)

  • Mentor, Ohio, United States
  • Jan 30th
2 NEW NIAGARA CARBIDE ENDMILLS 3/8" DIA 3/8" SH. 5 FL .030 RAD. COATED F34

2 new niagara carbide endmills 3/8" dia 3/8" sh. 5 fl .030 rad. coated f34

  • Mentor, Ohio, United States
  • Jan 30th
5 NEW 3/8" SHANK HSS END MILLS. 4 FL. 5/16" SLIGHTLY UNDER / OVER SIZED USA F49

5 new 3/8" shank hss end mills. 4 fl. 5/16" slightly under / over sized usa f49

  • Mentor, Ohio, United States
  • Jan 30th
9 NEW 9/32" DIAMETER CARBIDE END MILLS. 2 FLUTE. MADE IN USA [A584]

9 new 9/32" diameter carbide end mills. 2 flute. made in usa [a584]

  • Mentor, Ohio, United States
  • Jan 30th
2 NEW 1/2" SHANK HSS END MILLS. 4 FLUTE. SLIGHTLY UNDER OR OVER SIZED USA {F45}

2 new 1/2" shank hss end mills. 4 flute. slightly under or over sized usa {f45}

  • Mentor, Ohio, United States
  • Jan 30th
1 NEW 3/8" SHANK CARBIDE ENDMILLS. 3/8" DIAMETER. 4 FLUTE. MADE IN USA (Z618)

1 new 3/8" shank carbide endmills. 3/8" diameter. 4 flute. made in usa (z618)

  • Mentor, Ohio, United States
  • Jan 30th
3 NEW 3/8" DIAMETER CARBIDE END MILL. 2 FLUTE. 3/8" SHANK. MADE IN USA [A567]

3 new 3/8" diameter carbide end mill. 2 flute. 3/8" shank. made in usa [a567]

  • Mentor, Ohio, United States
  • Jan 30th
2 NEW KENNAMETAL 10 MM DIAMETER CARBIDE ENDMILL. 4 FL. KC 610 COATED. USA E612

2 new kennametal 10 mm diameter carbide endmill. 4 fl. kc 610 coated. usa e612

  • Mentor, Ohio, United States
  • Jan 30th
2 NEW KENNAMETAL 12 MM DIAMETER CARBIDE ENDMILL. 4 FLUTE. KC 610 COATED. E620

2 new kennametal 12 mm diameter carbide endmill. 4 flute. kc 610 coated. e620

  • Mentor, Ohio, United States
  • Jan 30th
6x42mm Double Flute Milling Cutter Router Cutting Bit for PCB CNC Engraving

6x42mm double flute milling cutter router cutting bit for pcb cnc engraving

  • Shen Zhen, China
  • Jan 30th
6x17mm Sharp Edge CNC PCB Milling Cutter Router Cutting Bit Double Flute

6x17mm sharp edge cnc pcb milling cutter router cutting bit double flute

  • Shen Zhen, China
  • Jan 30th
32mm Cutting Edge Shank Diam.6mm CNC Machining Router Cutting Bit 2-Flute

32mm cutting edge shank diam.6mm cnc machining router cutting bit 2-flute

  • Shen Zhen, China
  • Jan 30th
Butterfield 2" Dia 2 Flute 1 1/4" Shank End Mill #5110612

Butterfield 2" dia 2 flute 1 1/4" shank end mill #5110612

  • Philadelphia, Pennsylvania, United States
  • Jan 30th
Brand new Old stock in original package. Butterfield2" Dia. 2 Flute- 1 1/4" shank End MillOAL: 4 1/2"HSG 8
6x22mm Milling Cutter Router Cutting Bit Double Flute Straight Slot

6x22mm milling cutter router cutting bit double flute straight slot

  • Shen Zhen, China
  • Jan 30th
6x6mm Carbide End Mill Engraving Bit Milling Cutter for PCB CNC Machinery

6x6mm carbide end mill engraving bit milling cutter for pcb cnc machinery

  • Shen Zhen, China
  • Jan 30th
5pcs 4x22mm Milling Cutter Router Cutting Bit Double Flute for PCB Machining

5pcs 4x22mm milling cutter router cutting bit double flute for pcb machining

  • Shen Zhen, China
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies