Engines (Stationary Engines) for sale, page 191

Original waterloo and waterloo contract hit miss gas tank very rare

Mayville, Wisconsin, United States
Jan 31st

I HAVE FOR SALE AN ORIGNAL WATERLOO AND WATERLOO CONTRACT ENGINE FACTORY FUEL TANK. THEY WERE FOUND ON THE WATERLOO BOYS AND ALSO WERE ORIGINAL ON THE CONTRACT ENGINE LIKE: SANDOW, MAJESTIC, JOHN SYMTHE, SUCCESS AND T. EATON.

Wizard magneto type 61 model 4 hit and miss engine antique

Touchet, Washington, United States
Jan 31st

WIZARD MAGNETO TYPE 61 MODEL 4, UNTESTED. MAGNETO IS STIFF BUT TURNS FREE. BROKEN IGNITOR MOUNT.

Used diesel engine/toro 322

Ontario, California, United States
Jan 31st

This motor was in a Toro Model 223 When motor was still in the mower it was running fine with around 4100 hours on it. Engine Model# L3E-27915 It has the starter, alternator, muffler, etc. It sells in as is condition, no warranty written or expressed.

Friction magneto type j5 hit and miss antique engine

Touchet, Washington, United States
Jan 31st

FRICTION MAGNETO TYPE J5, RPM 2500. HARD TO READ THE BRASS TAG FOR MAKERS NAME. LOOKS LIKE A SIMILAR SEARS-ROEBUCK MAGNETO.

Original 1925 bathe model steam engine boiler catalog hit miss oiler magneto wow

Belgium, Wisconsin, United States
Jan 31st

This is an extremely hard to find original catalog from the Bathe Manufacturing Company in Philadelphia, PA, for their model marine and stationary steam engines, boilers, and model steam supplies. It is from 1925 and measures about 6 x 9 with 38 pages and is in excellent, lightly used condition. It is heavily illustrated with all of their engines, boilers, combination setups, and related equipment.

Original ihc famous titan mogul hit miss gas engine oil can farm machinery nice!

Belgium, Wisconsin, United States
Jan 31st

This is a rather hard to find original oil can that came from the factory as standard equipment with the International Harvester Famous, Titan, and Mogul engines. It also came with many other pieces of IHC equipment. It measures about 3 inches in diameter and 7 1/4 inches tall overall.

Nice bolted hit miss ball muffler 2 1/2 - 5 1 1/4" waterloo associated galloway

Baldwin, Wisconsin, United States
Jan 31st

This is a New Replacement Ball Muffler For Any Engine That Uses A 1 1/4" Pipe thread For the exhaust, It is Like Many Of The Mufflers That Were Made back Then & was used On Many Brands & Models Of Hit & Miss Gas Engines. This Is Bolted Together Like the Originals Were With 5/16" Square Nuts & Bolts, They were used On The Galloway, Associated, United, Witte, Amanco, 6 Hp John Deere, & Many Others, Basically anything with 1 1/4" Pipe thread Or Whatever You Can Adapt it to !!!!

Nice early style waterloo gas engine co hit miss ball muffler with pipe 3/4"

Baldwin, Wisconsin, United States
Jan 31st

This is a New Replacement Ball Muffler For the Earlier Waterloo & Waterloo Contract Hit & Miss Gas Engines ...... Part # AG40 Fits: 1 1/2 1 3/4 & 2 Hp Sizes Correct For: AMERICAN BOY, BANNER, BAUER, BIG CHIEF, DESJARDENS, D. T.

Waterloo contract hit miss gas engine governor cove 2 1/2 & 3 hp sandow imperial

Baldwin, Wisconsin, United States
Jan 31st

This is a Governor Cover Part # G114 For the 2 1/2 - 3 Hp Waterloo Contract Engines Like John Smythe, Big Chief, Wonder, Faultless, Sandow, & Many Others This Only Fits the Contract Engines with The Governor in the flywheels, The Waterloo Engines, & A few Contract Engines Use A fly-ball Gov, Right behind the Cylinder.... This uses A different Cast Iron cover.

Nice waterloo gas engine co hit & miss ball muffler 2 1/2 - 5 hp 1 1/4" w/ pipe

Baldwin, Wisconsin, United States
Jan 31st

This is a New Replacement Ball Muffler For the Waterloo & Waterloo Contract Hit & Miss Gas Engines ...... Part # AG50 Fits: 2 1/2 3 4 & 5 Hp Sizes 1 1/4" Pipe Correct For: AMERICAN BOY, BANNER, BAUER, BIG CHIEF, DESJARDENS,

Waterloo gas engine co 1 1/2 hp crank guard splash cover waterloo boy hit & miss

Baldwin, Wisconsin, United States
Jan 31st

This is a Crank Guard OR Oil Splash Guard, Part # K2032 For the 1 1/2 Hp Waterloo Gasoline Engine Co. OR Waterloo Boy Gas Engines....... The Waterloo Engines & A few Contract Engines Use A fly ball Gov, Right behind the Cylinder.

Nice waterloo boy & contract hit miss gas engine 1 1/2 - 12 hp igniter trip ag37

Baldwin, Wisconsin, United States
Jan 31st

This is an Igniter Trip for the Waterloo Gas Engines, Including Most All Of The Waterloo Contract Hit & Miss Governed Gas Engines, This Will Fit All The Engines From 1 1/2 HP To the 12 Hp Engines, That Uses A standard Under Strike Type Igniter. This is About 5" In Overall Length, Mounting Bolt Holes are Approx. 1 1/4" Apart.

Nice later style waterloo gas engine co hit miss ball muffler with pipe 3/4"

Baldwin, Wisconsin, United States
Jan 31st

This is a New Replacement Ball Muffler For the Later Waterloo & Waterloo Contract Hit & Miss Gas Engines, All The Small H & K Waterloo Boy 1 1/2 1 3/4 with the 3/4" exhaust Used these Mufflers, As it shows them in the Sales books.....

Waterloo contract 4 - 5 hp crank splash guard hit & miss gas engine john smythe

Baldwin, Wisconsin, United States
Jan 31st

This is a Crank Guard OR Oil Splash Guard, Complete With the correct Mounting Bolts.....Part # 151H For the 4 - 5 Hp Waterloo Gasoline Engine Co. Built Engines Commonly Known As "Contract Engines" That Use A Butterfly Type Governor In the flywheels, This is not For the Waterloo Boy Engines That Have the Fly-ball Type Governor Right behind the Cylinder. This is 15" long Overall........

Nice cast iron oiler greaser reducer lunkenheimer crown gits jewel ihc 1/4 - 3/8

Baldwin, Wisconsin, United States
Jan 31st

This is a nice Little Cast Iron Adaptor For Your Oiler, Grease Cups, Fuel Line Ect. To Either Step Up From 1/4" To 3/8" Pipe ( NPT ) Or down From 3/8" To 1/4" Pipe Like on A lot of Engines for the Cylinder Oiler pipe, These also Look Good For Adapting Larger Grease Cups, Or Oilers, to the Main Bearings of Gas Engines, Electric Motors, Water Pumps, Line Shafts Or Other Equipment.... You are Getting ONE ( 1 ) 1/4" to 3/8" adaptor......Please order the quantity You want...

Nice original stover hit miss gas engine wicotrip arm bracket 41ct1

Baldwin, Wisconsin, United States
Jan 31st

This Is a Wico Magneto Trip Arm Bracket (Part Number 41CT1) For Stover Hit & Miss Or Throttle Governed Gas Engines Using A Wico EK Magneto. Looks Like it Mounts to A 7/16" Round Rod It Is Complete & in Good Condition, This would be Ideal For someone who Is trying to Put An Engine together, That is Missing Some pieces Or Build one Out Of Parts, Or Replace one that Is Broke, repaired, Or Wore Bad ....

Nice old later style waterloo gas engine co hit miss ball muffler with pipe 3/4"

Baldwin, Wisconsin, United States
Jan 31st

Measuring at 6 1/2 inches in diameter and 6 1/2 inches tall with a 3/4" Pipe thread, this rusty original-looking ball muffler is the correct style for your engine. It fits 1 1/2, 1 3/4 & 2 Hp sizes with 3/4" exhaust pipe. This Waterloo Gas Engine Co.

Hercules economy jaeger hit miss gas engine webster trip arm bracket 345k30 rod

Baldwin, Wisconsin, United States
Jan 31st

This Is an Exhaust Rod Complete With the Igniter Trip Arm Bracket (Part Number 345K30) & Trip Arm, For the 1 1/2 1 3/4 & 2 Hp Hercules, Economy, & Jaeger Hit & Miss Or Throttle Governed Gas Engines Using A Webster Magneto. The cam Roller Doesn't turn, But Should with little Effort, As nothing is too rusty.... There is A little wear On the exhaust Rod & the trip Finger, But It is All Useable, Even the spring Looks Good !!

Newstationary hit miss gas engine 1 - 12 hp webster magneto trip finger assembly

Baldwin, Wisconsin, United States
Jan 31st

This is a Brand new, Made Just Like the Original.....ALL in The USA !! Webster Magneto Trip Assembly for the Waterloo Gas Engines, Including Most All Of The Waterloo Contract Hit & Miss Governed Gas Engines, This Will Fit All The Engines From the 1 1/2 HP To the 12 Hp Engines, That Uses A Webster Mag Bracket 303K8A. Will Also Work For most Any Other Engine Using the Webster Magneto This is About 6 1/2" In Overall Length, 3/4" Of Adjustment, Has Approx.

Waterloo boy gas engine 1 1/2 hp crank gear guard splash cover hit & miss combo

Baldwin, Wisconsin, United States
Jan 31st

This is a Set Of Guards........ It Has A Crank Guard OR Oil Splash Guard, Part # K2032 & A Cam Gear/ Fly-ball Governor Cover Part # 139 E For the 1 1/2 Hp Waterloo Gasoline Engine Co. OR Waterloo Boy Gas Engines.......