face mount for sale, brand-new and used.

The Jacobs CAT V 50 Shell/Face mill tool holder is designed to hold up to a 1-1/2-Inch shank cutting tool. It has a 2.4-Inch projection and is prebalanced to 8,000 RPM. The Jacobs CAT V 50 Shell/Face mill tool holder is designed for heavy duty cutting and face milling.

1-used metal lathe face plate. 8-1/2" in diameter, 11/16" thick with a 1-3/8" threaded center with 8 threads per inch (TPI) There are 4 oblong holes that extend completely through the plate and that are centered around the center hole and the long axis of the holes radiate from about 1-3/4" from the center to 3-3/4' from the center. They are 1 - 15/16" long by 1/2" wide.

Custom made, reproduction face plate with 5/16"-18 tapped holes and 7/16" wide slots. 2-1/4"-8 threaded mount. Shown on a South Bend Heavy 10" lathe.

Brand new in the box. Custom made Tools4cheap face plate with 5/16"-18 tapped holes and 7/16" wide slots. 1-1/2"-8 threaded mount.

UP FOR AUCTION IS A Rohm - 88486 - Face Driver Adapters Mount NEW OLD STOCK WITH A FEW MINOR BLEMISHES COMPARE TO $1900-$2000 NEW FROM DEALER Rohm Adapter Plates for CoA & CoK Face Drivers • Adapter plates without spring set (for CoA, type 680-60 and CoK) 88486 DIN55026 A-6 ROHM ADAPTER PLATE FOR CoA, CoB, CoK FACE DRIVERS Brand: ROHMMFG #: 88486

UNUSED.. FEELER FACE PLATE

11 inch face plate for monarch 10ee

You are bidding on a used Whip-mix Face Bow complete with Bite Fork in good working condition. This is a tool-less face bow which means you do not need to use the hex driver to tighten each joint component. It is used but you can use this face bow for your patient right after opening up the package and you do not need to clean up this item.

Selling 8 Brand new in package 3M™ Cap Mount Headgear H18P for use with Peltor™ Ear Muffs Overview 3M helps provide reliable face protection. Headgear features a unique system that allows window replacement in seconds. Reversible headgear mounts to hard hat for advanced impact resistance.

Lathem FR700 Face Recognition System Simply Look and Go! The Lathem FR700 (FaceIN) is a complete time, attendance and access control system using face recognition technology to instantly identify employees. It provides a touch-less, hygienic alternative to fingerprint readers, while still eliminating "buddy punching"and the need for cards and badges.

var flashVersion = window.flashVersion ? window.flashVersion : 0;if (flashVersion

You are buying one (1) box of Twenty five (25) Simpson StrongTie IUS2.56/9.5 Face mount I joist hanger. 18 Gauge 2-5/8"W x 9-1/2"H x 2"B

New, never used. Pictures show 14, but I found two more after pictures were taken. 16 ea Simpson Strong Tie U210R Rough Cut 2 x 10 2x10, 2x12, 2x14 Standard Joist Hanger 16 Gauge 2"W x 9-1/8"H x 2"B Use with 10d and 16d Fasteners in Header, 10d x 1-1/2" in Joist Zinc galvanized finish containing 0.90oz of zinc per square foot of surface area (total both sides) Shipping based on lower 48.