+ Post new Ad

Fast Change Tools

The average price for current category was $27.52 last month.

There are 4646 ads in this category.

Aloris AXA-77 Cut Off & Grooving Holder USA

Aloris axa-77 cut off & grooving holder usa

  • Columbus, Ohio, United States
  • Oct 25th
QUICK CHANGE CUT-OFF & GROOVING HOLDER Designed for extremely high rigidity under heavy duty conditions, and cool chatter-free operation at higher speeds. Two different blades can be used with this holder: self-locking throwaway insert blade, or reversible blade with brazed-in carbide tips, shown. The chip breaker is an integral part of the blade and cannot be lifted by broken chips.
Aloris BXA-4D Boring Bar Holder

Aloris bxa-4d boring bar holder

  • Dunnellon, Florida, United States
  • Oct 25th
This is a unused Aloris BXA-4D Boring Bar Holder I purchased for a 10" lathe and it proved to be too large for my lathe. I did a boneheaded thing and machined off the height slightly to be able to center the tool in my lathe, but it turned out not to work. I put it in the cabinet and am finally going to sell it as I don't expect to purchase a larger lathe.
Aloris BXA-6 Multiple Tool Holder

Aloris bxa-6 multiple tool holder

  • Dunnellon, Florida, United States
  • Oct 25th
This is a unused Aloris BXA-6 Multiple Tool Holder I purchased for a 10" lathe and it proved to be too large for my lathe. I did a boneheaded thing and machined off the height slightly to be able to center the tool in my lathe, but it turned out not to work. I put it in the cabinet and am finally going to sell it as I don't expect to purchase a larger lathe.
Aloris BXA-7 Universal Parting Blade Holder

Aloris bxa-7 universal parting blade holder

  • Dunnellon, Florida, United States
  • Oct 25th
This is a unused Aloris BXA-7 Universal Parting Blade Holder I purchased for a 10" lathe and it proved to be too large for my lathe. I did a boneheaded thing and machined off the height slightly to be able to center the tool in my lathe, but it turned out not to work. I put it in the cabinet and am finally going to sell it as I don't expect to purchase a larger lathe.
Aloris CA1 And CA2 Quick Change Tool Post Holders, Sale Is For 2 Of Each, 4 Pcs.

Aloris ca1 and ca2 quick change tool post holders, sale is for 2 of each, 4 pcs.

  • Sellersville, Pennsylvania, United States
  • Oct 24th
Genuine Aloris CA1 And CA2 Quick Change Tool Post Holders, Sale Is For 2 Of Each, 4 Pcs., Nice usable condition, As You See Them.
KWIK SWITCH 200 3/4" DIAMETER ENDMILL HOLDER END MILL MORE LISTED LOT C14960

Kwik switch 200 3/4" diameter endmill holder end mill more listed lot c14960

  • Dayton, Ohio, United States
  • Oct 24th
KWIK SWITCH 200 3/4" DIAMETER ENDMILL HOLDER END MILL MORE LISTED LOT C14958

Kwik switch 200 3/4" diameter endmill holder end mill more listed lot c14958

  • Dayton, Ohio, United States
  • Oct 24th
Aloris BXA-2 Quick Change Turning and Boring Tool Holder, Original Aloris Brand

Aloris bxa-2 quick change turning and boring tool holder, original aloris brand

  • Port Gamble, Washington, United States
  • Oct 24th
Used Aloris BXA 2.
Kennametal KV45 TB 1-1/4 CNC Toolholder for Hitachi Seiki

Kennametal kv45 tb 1-1/4 cnc toolholder for hitachi seiki

  • New York, New York, United States
  • Oct 24th
You are bidding on (1) Used Kennametal KV-45 TB 1-1/4 toolholder for a Hitachi Seiki CNC Lathe. It is in excellent condition. 
Geometic Tool Die Head 3/4-D Style (?) Mounted On CXA Holder

Geometic tool die head 3/4-d style (?) mounted on cxa holder

  • Garden City, Idaho, United States
  • Oct 24th
KWIK SWITCH 200 80237 COLLET CHUCK W/3 ACURA FLEX 3/4" SERIES COLLETS C14965

Kwik switch 200 80237 collet chuck w/3 acura flex 3/4" series collets c14965

  • Dayton, Ohio, United States
  • Oct 23rd
KWIK SWITCH 200 80237 COLLET CHUCK W/3 ACURA FLEX 3/4" SERIES COLLETS C14964

Kwik switch 200 80237 collet chuck w/3 acura flex 3/4" series collets c14964

  • Dayton, Ohio, United States
  • Oct 23rd
HARD TO FIND KWIK SWITCH 200 3/16" DIAMETER ENDMILL HOLDER END MILL LOT C14927

Hard to find kwik switch 200 3/16" diameter endmill holder end mill lot c14927

  • Dayton, Ohio, United States
  • Oct 23rd
HARD TO FIND KWIK SWITCH 200 1/4" DIAMETER ENDMILL HOLDER END MILL LOT C14928

Hard to find kwik switch 200 1/4" diameter endmill holder end mill lot c14928

  • Dayton, Ohio, United States
  • Oct 23rd
1/4" QUICK CHANGE TOOL HOLDER USED ON ROYAL R8 MASTER EASY CHANGE LOT C14116

1/4" quick change tool holder used on royal r8 master easy change lot c14116

  • Dayton, Ohio, United States
  • Oct 23rd
Dorian Tool QC Lathe Tool Holder D35CXA-5-4 for No 4 Morse Taper Tooling

Dorian tool qc lathe tool holder d35cxa-5-4 for no 4 morse taper tooling

  • Oxford, North Carolina, United States
  • Oct 23rd
This is a new in the original plastic container Dorian Tool No. 5 Morse Taper Holder for No. 4 Morse Taper tooling), Model D35CXA-5-4 I am also listing a brand new Dorian Super Quick Change Tool Post - Model SDN35CXA and six new Dorian CXA tool holders and will combine shipping if you purchase multiple units.
Dorian Tool Quick Change Lathe Tool Post - Wedge Lock Model SDN35CXA

Dorian tool quick change lathe tool post - wedge lock model sdn35cxa

  • Oxford, North Carolina, United States
  • Oct 23rd
This is a new in the original plastic container Dorian Tool Super Quick Change Tool Post - Model SDN35CXA, for 14-17" (400mm) lathe swing. This is the wedge lock model and includes the installation and setup instructions. I am also listing six Dorian CXA tool holders and will combine shipping if you purchase multiple units.
Dorian Tool Quick Change Lathe Tool Holder No 4 - D35CXA-4-CNC for 1" boring bar

Dorian tool quick change lathe tool holder no 4 - d35cxa-4-cnc for 1" boring bar

  • Oxford, North Carolina, United States
  • Oct 23rd
This is a new in the original plastic container Dorian Tool No 4 HD Boring Bar Holder, Model D35CXA-4-CNC for 1" boring bars. I am also listing a brand new Dorian Super Quick Change Tool Post - Model SDN35CXA and six new Dorian CXA tool holders and will combine shipping if you purchase multiple units. Posted with eBay Mobile
Dorian Tool Quick Change Lathe Tool Holder No 2 - D35CXA-2 (3/4 to 1" tools)

Dorian tool quick change lathe tool holder no 2 - d35cxa-2 (3/4 to 1" tools)

  • Oxford, North Carolina, United States
  • Oct 23rd
This is a new in the original plastic container Dorian Tool No 2 Turn, Face, and Bore Holder, Model D35CXA-2 for 3/4 to 1" cutting tools. I am also listing a brand new Dorian Super Quick Change Tool Post - Model SDN35CXA and six new Dorian CXA tool holders and will combine shipping if you purchase multiple units. Posted with eBay Mobile
KWIK SWITCH 200 3/4" DIAMETER ENDMILL HOLDER END MILL MORE LISTED LOT C14954

Kwik switch 200 3/4" diameter endmill holder end mill more listed lot c14954

  • Dayton, Ohio, United States
  • Oct 23rd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies