Finisar Xgig XGIG-C001 W/ Gigabit Fiber Channel analyzer Finiser, US $2,400.00 – Picture 0

Finisar Xgig XGIG-C001 W/ Gigabit Fiber Channel analyzer Finiser, US $2,400.00 – Picture 1

Finisar Xgig XGIG-C001 W/ Gigabit Fiber Channel analyzer Finiser, US $2,400.00 – Picture 2

Finisar Xgig Xgig-c001 W/ Gigabit Fiber Channel Analyzer Finiser

US $2,400.00

Hudson, Massachusetts, United States
Jan 29th

Open on mobile:
QR code

Finisar Xgig XGIG-C001 W/ Gigabit Fiber Channel analyzer Unit is in good condition (Could not test functionality of FTP or fiber channel due to lack of software) Units powers on Reconfig tested Unit passed self test Terminal Configuration: Data Rate - 57600 Data Bits - 8 Parity - None Stop Bits - 1 How Control - None Setup tutorial: Setting Up an FC Analyzer Allows debugging on the Fibre Channel layer FC Analyser 1.Fibre Channel Analyzer 2.Network Cable 3.RS-232 Cable 4.Additional Fibre Channel Cables 5.Host PC with RS-232 connection and Ethernet Connection 6.Three Prong Power cable connected to 110v or 220v outlet. Equipment Needed Console Cable How to get started You will need.... A PC with Procomm Plus or similar program installed. An RS-232 port and an RS-232 cable. Procedure: Open Procomm and change the connection settings to direct connect-Com1. Set Baud rate to 57600. Along with updating the IP address. The gateway will need to be updated. Set IP address Connect the FC Cables Server side FC cables Xgig Trace Management Software Collect the FC traces Collect the traces The Finisar Xgig analyzer needs software installed to be able to communicate with the hardware Console to USB convertor Now you are ready to obtain the FC traces and you can start analyzing ATTENTION INTERNATIONAL BUYERS !!! Customs and VAT fees are NOT included in item cost. It is a Buyer responsibility to pay Customs and Vat fees in your country. Terms and Conditions All sales are final. The Buyer assumes all risk of liability with respect to the purchase and determination of suitability of use of product. The buyer is solely responsible for the shipping charges. Payment is expected in 4 days after item is sold. Products Unless otherwise stated you are purchasing a used item. These items may or may not have scratches, nicks and dings. None of this will affect the fit or functionality of an item. Once again it is up to you to ask questions up front to determine the suitability of an item for your particular application. Operating Systems are Not installed Software suitability is the buyers responsibility we will not be held liable for in-comparability issues. Batteries: Also we will not warranty and batteries unless specifically stated Warranties: First is as-is; this will mean that the unit has not been fully tested. Or has not been tested at all and is being sold without warranty expressed or implied. We will not accept any returns on these items. So please make sure you bid accordingly. Second is guaranteed against Dead on Arrival what this means is that we have tested the unit and it has passed our inspection criteria and is a working unit. DOA will mean that the unit will show symptoms of a hardware failure which will prevent you from using this unit as it was intended to be. If you have a problem please contact ASAP prior to trying anything else. This warranty will be void and null if the product is modified, opened, repaired or tampered with in anyway. All DOA notification must be filed with Advanced Electronics Recycling within 4 days of receiving your order. Failure to notify us or return a product within the warranty period will be deemed to be an acceptance of the unit. Servers, Laptops, and Desktops Batteries cannot be refurbished and may or may not hold a charge. Therefore these are not covered under our warranty policy and will not be an acceptable reason for returning an item. Advanced Electronics Recycling is not responsible for any software that may or may not be installed on your new equipment this includes operating subsystems drivers ECT... Software issues are not covered under warranty coverage’s. Returns All returns must be authorized by Advanced Electronics Recycling prior to a return. You will need to contact us to get a Return Authorization Number (RMA) Please note any item send back Non-Defective or unwanted items will incur a 20% restocking and relisting fee The customer if fully responsible for all return shipping costs on Non-defective or unwanted items. RMA number must be clearly placed on the outside of carton being returned. Please return unit 100% complete the same way you received it. RMA approval is dependent upon everything being returned in condition it was sent. If you have failed to notify us of a return we will not accept the package. Shipping and Accounting Automation by Teapplix

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Unit is in good condition (Could not test functionality of FTP or fiber channel due to lack of software)”