fire hose 2 inch for sale, brand-new and used.

• One 6 inch NH/NST fire engine suction cap. • For the non-experts the size is measured by the ID (inside diameter of the discharge pipe) • Chrome plated brass • This cap has a distinctive circle pattern on the face. • Threads in good condition • Rubber gasket in good condition • Some small scratches and dings from usage, but overall the chrome is still in very good condition.

Used 5 inch storz x three 2-1/2 NH male gated wye with relief valve. Made of aluminum. Good used condition.

Stanbroil 21-Inch QCC1 Propane Hose and Regulator Connection Kit for Most LP Gas

Fire HoseNozzle red plastic NST 1 1/2 inch never used see pics all working conditions 

Used 4 inch locking storz x three 2-1/2 NH male gated wye with relief valve. Made of aluminum. Good used condition.

QTY 10 DISHARGE HOSES FOR TRASH/WATER PUMPS. VARIOUS LENGHTS see photos. THERE ARE 8- 3 inch and 2- 2.5 inch.

I have a lot of 34 LDH fire hose connectors

A VINTAGE FIREHOSE FITTING TO FEED ONE FOUR INCH FIRE HOSE WITH TWO THREE INCH FIRE HOSES. PULLED OFF A MASS TRUCK LAST YEAR THIS FITTING COUPLING HAS BACK FLOW PREVENTERS TO PREVENT THE WATER IN THE FOUR INCH HOSE TO FLOW BACK INTO THE THREE INCH HOSES IF THE PRESSURE DROPS IN THE SMALLER HOSES. IT IS MADE FROM CAST ALUMINUM.

• This is Out of Service hose that was 1.5 inch ID double jacket fire hose. It is great for lining boat docks or other bumper guard type of applications, as well as a chaffing guard for ropes, mooring lines and anything else that will fit inside this 1.75 inch inside diameter hose (see photos, showing hose over a common 1.5 inch PVC plastic pipe). • This is yellow hose that is now faded and battle scared in

• This is Out of Service hose that was 1.5 inch ID double jacket fire hose. It is great for lining boat docks or other bumper guard type of applications, as well as a chaffing guard for ropes, mooring lines and anything else that will fit inside this 1.75 inch inside diameter hose (see photos, showing hose over a common 1.5 inch PVC plastic pipe).

this is a 1 1/2 inch by 100 ft. fire hose tested 250#psi.that was removed from a local school for renovation. the hose is from a pin rack ,condition is unused but soiled .brass couplings.will come with fire hose pin rack

This is a wye used to go from a 2 1/2 inch intake to (2) 2 1/2 discharges with valves. Think the brand is either Elkhart or Akron. 

INGERSOLL RAND 441A2 AIR BACKFILL TAMPER | 5-3/4" MALLEABLE BUTT | 47 LBS. | 1,750 BPM BB17 You are bidding on a INGERSOLL RAND AIR PNEUMATIC 441A2 BACKFILL TAMPER | 5-3/4" MALLEABLE BUTT | 47 LBS. | 1,750 BPM.

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

AAGR Cross-Sectional Shape Style Round AAJF

This is an Elkhart 2 1/2 inch ball valve to be used either as a Nozzle on a fire hose or on a deck gun valve.