Fittings & Plates (Workholding Tools) for sale, page 40

Machinist mill lathe machinist grinding fixture for machine

Morris Plains, New Jersey, United States
Jun 8th

PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS, I WILL COMBINE SHIPPING. . .

Machinist tools mill lathe machinist 6" face plate 2 3/8 center

Morris Plains, New Jersey, United States
Jun 8th

PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS, I WILL COMBINE SHIPPING. . .

Machinist tools 6" x 1" x 1" sine bar sinebar

Bremen, Indiana, United States
Jun 8th

MACHINIST TOOLS 6" X 1" X 1" SINE BAR This is in good used condition. Comes from a retired machinist that no longer needs this tool. It does have his name stamped on the bottom that I have covered up in the picture.

Clean! nikken 7-1/2" horizontal / vertical super spacer workholding fixture

La Puente, California, United States
Jun 8th

Made in Japan by Nikken. This is a used 360 degree Indexing Super Spacer Workholding Fixture in GREAT condition. Model #: SI-71/2 Specifications: Chuck Diameter: 7-1/2" Chuck Thickness: 3" Number of Jaws: 3 Thru Hole: 2" Base to Center (vertical): 6" Base to Face of Chuck (horizontal): 7" Overall Dimensions (vert): 14" x 8" x 10-1/2" tall Comes as shown in pictures.

Hardinge hv-4 5c workholding index fixture / indexer + collets - hv-4n

La Puente, California, United States
Jun 8th

Made in the U.S.A. by Hardinge. This is a used Horizontal / Vertical 5C Collet Indexing Fixture in EXCELLENT condition.

Ttc webbed end slotted angle plate - dimensions: 10'' x 8'' x 6''

Duncan, South Carolina, United States
Jun 8th

Applications Perfect wherever square surfaces are required for checking or layout work. Features Machined square and parallel. High tensile cast iron seasoned against distortion.

6.5" lathe faceplate with clamp blocks

Gilbert, Arizona, United States
Jun 8th

This is an aluminum 6.5" face plate with clamp blocks, it has an M24x3 mounting hole. The plate has some pits, but will work just fine for Harbor Freight and other Chinese lathes. Truing the plate after install is recommended.

One lot of 3 1-2-3 set up blocks (inv.35378)

Portland, Connecticut, United States
Jun 8th

One Lot of 3 1-2-3 Set Up Blocks 2"x 3" x 1" 23 hole used good shape (Inv.35378)

Pair of 1-2-3 set up blocks (inv.35379)

Portland, Connecticut, United States
Jun 8th

Pair of 1-2-3 Set Up Blocks 2"x 3" x 1" 23 hole used good shape (Inv.35379)

Right angle iron 4"x5"x3-3/4" (inv.35382)

Portland, Connecticut, United States
Jun 8th

Angle Plate 4"x5"x3-3/4" used with some surface rust pitting made in Japan (Inv.35382)

Nice hammond 5c indexer fixture

Pomona, California, United States
Jun 8th

NICE HAMMOND 5C INDEXER FIXTURE Size : 5CHeight ; 7 " What you see , is what you get .All items ship USPS .

Angle plate swivel/tilt, swivels 360 degrees (cast iron)

Chalfont, Pennsylvania, United States
Jun 8th

Used- Swivel/Tilt Angle Plate (CAST IRON) Solid! Swivels 360 Degrees. No Company Marking, Just A Number 825-54 Top Plate H= 2-7/8" W= 5-1/4" L= 7-1/2" Bottom Plate H= 2.00" W=5-1/4" L= 9-1/16" Overall Height = 4-7/8" Swivel Diameter = 5-1/8" Has T-Slots(Width= .665") For Bolting Top & Bottom Plate Together, But You Will Need Nuts For 1/4-20 Threaded Rods or Screws, To Conjoin Together.

Precision sine plate 1-1/16"x2-27/32"x3-13/32"

Chalfont, Pennsylvania, United States
Jun 8th

Used- Precision Sine Plate (AMERICAN MADE) H= 1-1/16" W= 2-27/32" L= 3-13/32" (22)1/4-20 Tapped Holes R<---2-1/2"--->R Center Distance Some Staining & Small Mark On The One Side. (See Pics) In Good Condition! Made in The USA!

Nice! set of 4 moore tool jig grinder / borer extension parallels

Covina, California, United States
Jun 8th

Made in the USA by Moore Tool Co. This is a Set of 4 Jig Grinder / Borer Extension Parallels. SPECIFICATIONS: T-Slot Sizes: 0.65" x 0.40" x 0.87" deep Overall Dimensions: 10" x 3" x 2" high

Hardinge 5c collet horizontal / vertical fixture + collets

Covina, California, United States
Jun 8th

Made in the USA by Hardinge Bros Inc. This is a used 5C Collet Horizontal / Vertical Fixture w/ 4 Collets. SPECIFICATIONS: Spindle Type: 5C Spindle Nose Threads: 2-3/16"-10 Collet Sizes Included: 3/16", 1/4", 7/16", 3/4"

Amf millimg clamps vises

Gatineau, Quebec, Canada
Jun 8th

Excellent condition milling pressure clamping system. Lets you apply linear pressure without using jigs or holddown clamps German made, AMF

Lathe dog driver plate 5 3/4" dia. l0 mount d5670

Long Beach, California, United States
Jun 8th

Sottof Sales You are purchasing the actual item in photos, may have rust and marks from use. Important! If you purchase more than one item please DO NOT PAY UNTIL I HAVE SENT YOU AN INVOICE otherwise it is very difficult to combine shipping.

L-00 l00 plate blank 7.5"

Madison Heights, Virginia, United States
Jun 8th

This is a blank 7.5" plate that fits a L-00 lathe spindle. Looks unused but kinda dirty with very light surface rust.

Nice parker x / y 5 x 5 "positioning table w/ starrett micrometers .001"

El Monte, California, United States
Jun 8th

NICE PARKER X / Y 5 X 5 "POSITIONING TABLE W/ STARRETT MICROMETERS .001" Size : 5 X 5 Readability : .001" Base : 6 x 6 " ** Comes as Shown ** **Discounted shipping available when MORE THAN one item is purchased but must send invoice request** ** If item is not paid within THREE days i

Nice hardinge 5c expanding mandrel 2" x 1-1/4" abc type multi step

Ellington, New York, United States
Jun 8th