flat end mill for sale, brand-new and used.

Ready to look at some REAL end mills? 2.00 Shank Weldon Rougher with a 1/4" corner radius in like new condition. Cutter Dia.

Some more REAL end mills! 2.00 Shank "Weldon" with a 3/8" corner radius in like new condition. Cutter Dia.

Some more REAL end mills! 2.00 Shank "Weldon" with a 3/16" corner radius in like new condition. Cutter Dia.

Some more REAL end mills! 2.00 Shank "Putnam" with a 3/16" corner radius in like new condition. Cutter Dia.

Ready to look at some REAL end mills? 2.00 Shank "FASTCUT" with a 9/32" corner radius in like new condition. Cutter Dia.

More REAL end mills! 2.00 Shank "Putnam" with a 1/2" corner radius in like new condition. Cutter Dia.

More REAL end mills! 2.00 Shank "TRW" BALL Mill M-42 in like new condition. Cutter Dia.

More REAL end mills! 2.00 Shank "Putnam" with sharp corner in like new condition. Cutter Dia.

Series VRXEDP#27761 1/2x3x1-1/4" VRX .020"CR XCEED For stainless steel, inconel, PH materials, cold rolled steel, titanium, cast iron and tool steels Reduces vibration for more aggressive machining TOLERANCES flute dia. +.000-.002 s

Series VRXEDP#27761 1/2x3x1-1/4" VRX .020"CR XCEED For stainless steel, inconel, PH materials, cold rolled steel, titanium, cast iron and tool steels Reduces vibration for more aggressive machining TOLERANCES flute dia. +.000-.002 s

This thing looks like it was never used but ready to be put to work, a Weldon F79 HSS, Right hand cut and 6 flute Rougher, Measures 2.000 and has a 3/8 corner radius end. 2" shank and 4.50 LOC. Weigh's 6 Lbs.

We have for sale some special carbide end mills (35 available) with the following specs: Cutting end: 1.5" x 3", 2 flute, with 1/8" radius on tip Hub: 3" diameter, 2"-8 internal thread Overall length: 5.5" Both left-hand and right-hand cut available Some have following information stamped on side of hub: Sonnet SK-4222 (or SK-4221) SN-1136303 (or SN-1136304)

HIGH SPEED END MILL CONDITION = NEW HIGH SPEED END MILL MANUFACTURER = UNKNOWN HIGH SPEED END MILL DIAMETER = 5/64" {.0781"} HIGH SPEED END MILL FLUTE LENGTH = 3/8" HIGH SPEED END MILL OVERALL LENGTH = 3-1/8" HIGH SPEED END MILL SHANK DIAMETER = 3/8" NUMBER OF FLUTES = 2 CENTER CUTTING = YES HIGH SPEED

HIGH SPEED END MILL CONDITION = NEW HIGH SPEED END MILL MANUFACTURER = ISRAEL HIGH SPEED END MILL DIAMETER = 11/32" {.3438"} HIGH SPEED END MILL FLUTE LENGTH = 9/16" HIGH SPEED END MILL OVERALL LENGTH = 3-1/8" HIGH SPEED END MILL SHANK DIAMETER = 3/8" NUMBER OF FLUTES = 2 CENTER CUTTING = YES

These are Niagara high speed 6 flute end mills 1" dia x 1 7/8 length of cut with a 5/8 shank. The side on these seem good but the ends range from a bit of wear on the corners to one that has some corners broken. None have been overheated or turned color in any way.

Hi, you are bidding on 1 new 2 Flute end mill. 1 - 3/4" Dia. -1/2" Shank 2 flute end mills HSS.

SOLID CARBIDE CHAMFER MILL CONDITION = NEW SOLID CARBIDE CHAMFER MILL MANUFACTURER = MILL MONSTER (USA) SOLID CARBIDE CHAMFER MILL DIAMETER = 1/2" (.500") SOLID CARBIDE CHAMFER MILL OVERALL LENGTH = 3" SOLID CARBIDE CHAMFER MILL SHANK DIAMETER = 1/2" NUMBER OF FLUTES = 4 CENTER CUTTING = YES SOLID CARBIDE CHAMFER MILL END TYPE = SINGLE END SOLID CARBIDE END MILL CUT

Welcome to Select Machine Tool Item Desc

About us Shipping Payment