flat pallet for sale, brand-new and used.

SYSTEM 3R 3R-803-SS08 & 3R-321-H1.11, CAROUSEL TOOL CHANGER & EDM HEAD respectively from MITSUBISHI M35J SINKER EDM CNC Condition: GOOD, Some minor scratches, marks, & dents Carousel has sixteen tool sites Includes WALKER CERAMAX Magnetic Chuck Base, 14-3/4" x 10" surface dimensions Free shipment to the lower 48 US States, Flat rate fo

SYSTEM 3R 3R-803-SS08 & 3R-321-H1, CAROUSEL TOOL CHANGER & EDM HEAD respectively from MITSUBISHI M25J SINKER EDM CNC Condition: GOOD, Some minor scratches, marks, & dents Carousel has eight tool sites Includes CACO 285-0610 Magnetic Chuck Base, 9-3/4" x 4-3/54" surface dimensions Free shipment to the lower 48 US States, Flat rate for all other a

BUSCH VACUUM PUMP CAT.: TYPE RA0160.B032.1102 DISPLACEMENT: 117 CFM VACUUM: 1.5 TORR OIL: (SAE) 30 WT. / 7.0 QT 2" NPT MOTOR INFORMATION SPEC.: 07J842X342H2 7.5 HP HZ: 60 PH: 3 230/460V

SIEMENSSAFETY DISCONNECT SWITCH CAT.: HF365 400 AMP 600 VOLTS NEMA TYPE 1 INDOOR TYPE VB II FUSIBLE PLEASE NOTICE THAT ITEM HAS SOME SCUFFS, SCRATCHES, RUSTING, ETC. FROM LONG TIME STORAGE ON SUPPLY ROOM SHELF.

BALDOR RELIANCEELECTRIC MOTOR SPEC. NO.: P40G335 CAT. NO.: EM4404T FRAME SIZE: 405T HP: 75 PHASE: 3 DESIGN: B TYPE: P RPM: 1185 HZ: 60 AMB: 40 °C SF: 1.15 VOLTS: 230/460

NO NAME ELECTRIC MOTOR N847 40HP 3PH 60HZ Z02Y306R050R-7 208-230/460V 3520 RPM APPROXIMATE SHAFT DIAMETER: 1 3/4" STEPS DOWN TO 1 5/8" AND THEN STEPS DOWN TO 1 1/4" PLEASE NOTICE THAT ITEM HAS SOME SCUFFS, SCRATCHES, RUSTING, ETC. FROM LONG TIME STORAGE ON SUPPLY ROOM SHELF. PLEASE NOTICE THE CONDITION OF THE TAG FOR

CLEAVER BROOKS ELECTRIC BOILER MOTOR PART NO.: 894-3518 FRAME: 254TDZ TYPE: TDR DES.: B PH: 3 INS. CL.: B3 DUTY: CONT MAX. AMB °C: 40 ENC: DP MODEL: 1K 254TTDR8602AN L HP: 20 VOLTS:

ELEKTRIM ELECTRIC MOTOR ELK-34100 10HP 230/460V 25.4/12.7A 3PH 60HZ 215 T FRAME TYPE: SF 1745 RPM CONTINUOUS DUTY 1 3/8" APPROXIMATE SHAFT DIAMETER PLEASE NOTICE THAT ITEM HAS SOME

TRANTER SUPERCHANGER PLATE HEAT EXCHANGER PART NO.: UNKNOWN QTY: 40 (19" X 8") PLATES 2" NPT X 1" NPT PLEASE NOTICE THAT ITEM HAS SOME SCUFFS, SCRATCHES, RUSTING, ETC. FROM LONG TIME STORAGE ON SUPPLY ROOM SHELF.

ERIEZ SAFEHOLDMANUAL MAGNETIC LIFTING PLATE UNIT MODEL: M-100 1000 LB MAXIMUM RATED LIFTNG CAPACITY PLEASE NOTICE THAT ITEM HAS SOME SCUFFS, SCRATCHES, RUSTING, ETC. FROM LONG TIME STORAGE ON SUPPLY ROOM SHELF.

SIGNODESTRETCH SHRINK WRAPPER MODEL: SG210 F51202 110 VOLT 20 AMP 1PH 60HZ APPROXIMATE OVERALL HEIGHT: 10' APPROXIMATE TABLE WIDTH: 4" APPROXIMATE HEIGHT FROM FLOW TO TOP OF TABLE: 9 1/2" ITEM HAS A UPRIGHT MASS ASSEMBLY THAT DISSASSEMBLES FOR SHIPPING.

BELL & GOSSETT CENTRIFUGAL PUMP CAT.: 1531-VTT MODEL NO.: 1 1/2BC 7 BF 2" X 1 1/2" 175 P.S.I. J49 60 GPM 51 FT 2 HP 1800 RPM MARATHON M309 208-230/460V

THIS LISTING IS MARKED FOR "PICK UP ONLY" BUT I HAVE NO PROBLEM ARRANGING FREIGHT TO YOU ANYWHERE IN LOWER 48 STATES FOR ADDITIONAL COST! JUST SEND ME A MESSAGE AND WE WILL WORK IT OUT! ACT NOW!

BELL & GOSSETT CENTRIFUGAL PUMP 1510 MODEL NO.: 3G 12.500 BF 300 GPM 150 FT. 25 HP 1800 RPM MAX. WORK PRESS.: 175 P.S.I.

AEC APPLICATION ENG. CORP.CENTRIFUGAL PUMP MODEL: 509503 S.O.: 31810 CODE: D7 SPEC. 3098K55 3 1/2" FLANGED INPUT 3" FLANGED OUTPUT MOTOR INFORMATION UNIMOUNT 125 HP: 20 PH: 3 HZ: 60

OILGEAR HYDRAULIC PUMP TYPE: HD-83006 RPM: 1200 RAT. PSI: 3000 1 1/8" APPROXIMATE SHAFT DIAMETER PLEASE NOTICE THAT ITEM HAS SOME SCUFFS, SCRATCHES, ETC. FROM LONG TIME STORAGE ON SUPPLY ROOM SHELF.

NO NAME HYDRAULIC PUMP MODEL NO.: P76C498-BY-06030-11-D-OK15-1 1 1/4" SHAFT DIAMETER PLEASE NOTICE THAT ITEM HAS SOME SCUFFS, SCRATCHES, ETC. FROM LONG TIME STORAGE ON SUPPLY ROOM SHELF. FOR ADDITIONAL INFORMATION ON ITEM PLEASE SEE THE ABOVE PHOTOS.

ARORA PUMPSTURBINE PUMP J6T 116A BF S4-10959-4 1 3/16" APPROXIMATE SHAFT DIAMETER PLEASE NOTICE THAT ITEM HAS SOME SCUFFS, SCRATCHES, RUSTING, ETC. FROM LONG TIME STORAGE ON SUPPLY ROOM SHELF. FOR ADDITIONAL INFORMATION ON ITEM PLEASE SEE THE ABOVE PHOTOS.

BALDOR INDUSTRIAL MOTOR CAT.: M4106T HZ: 60 ENC: TEFC PH: 3 HP: 20 VOLTS: 208-230/460 RPM: 3450 FR: 256T 1 5/8" APPROXIMATE SHAFT DIAMETER PLEASE NOTICE THAT ITEM HAS SOME SCUFFS, SCRATCHES, ETC. FROM LONG TIME STORAGE ON SUPPLY ROOM SHELF. FOR ADDITIONAL INFORMATION ON ITEM PLEAS