flat rake for sale, brand-new and used.

Dorian Tool D41S-CNC Chromium Molybdenum Alloy Steel Quick Change Super Oversized Boring Bar Toolholder with CNC Locking System for SDN40CA Super Quick Change Tool Post, 2" Tool Capacity, 4-1/2" Width, 2-63/64" Height

Quantity of 10

Quantity

Brand New BIAX Carbide tipped Blade to use with a BIAX / DAPRA hand scraper, home made scraper, BIAX Power Scraper. I am the Instructor for BIAX and DAPRA and teach "How to Scrape" Seminars around the world and I have been able to purchase a lot of these brand new scraper blades and am able to sell them to you at below wholesale price.These are unique blades as they are pre-ground to a 20 mm radius and can be used to scraper as a finish blade to scrape 20 to 40 points per 1 inch ( PPI ).

SHIPPING IS $6.50

MIDWEST RAKE78760 22" Throw-Away SqueegeeFlat Blade, No NotchesThreaded Coupling for Attaching to a PoleMade in the USA FAST AND FREE SHIPPING WITHIN THE UNITED STATES! Need it tomorrow? Call us!

WALTER S-VMSP-138R-45C MINI-MILL CUTTER CHAMFER You can purchase it from us for $28 with $7 shipping. IF YOU ARE OUTSIDE OF THE UNITED STATES, PLEASE CONTACT US FOR SHIPPING COST. This Walter S-VMSP-138R-45C is a 45-degree Lead Angle Chamfer Mini-Mill Cutter.

WALTER SVMSP-138R-45C MINI-MILL CUTTER CHAMFER You can purchase it from us for $68 with $12 shipping. IF YOU ARE OUTSIDE OF THE UNITED STATES, PLEASE CONTACT US FOR SHIPPING COST. This Walter SVMSP-138R-45C is a 45-degree Lead Angle Chamfer Mini-Mill Cutter.

Ajustable height and rake angle boring bar holder for 1/2 & 3/4 boring bars. One 1/2 x 9 and two 3/4 x 4 1/2 bars with bits included Easy to quickly set exact centerline and rake angle. Base mount plate is 3/8 thick with 1 inch slot.

T25 Torx 1/2” Shank Diameter Rotary Broach / Wobble Broach MADE IN USA T-25 Torx Includes rake angle at face Made from M-2 High Speed Steel Includes Pressure Relief Vent Hole Fits most common rotary broach holder brands .500” Shank Diameter x 1.75” Length Reaches 4.85mm deep and can be sharpened Designed for blind holes and through holes FREE SHIPPING T25 Torx Style Rotary Broach Punch | 1/2?

SGS 36867 Z1PCR Z-Carb-AP High Performance End Mill, Titanium Nitride-X Coating with Flat, 1/2" Cutting Diameter, 1-1/4" Cutting Length, 1/2" Shank Diameter, 3-1/4" Length, 0.030" Corner Radius

Micro Cut Boring Arbor by NIKKEN, BT40-BCB38-150, Used: This NIKKEN micro adjustable boring arbor is in very good condition. This Boring head adjusts in .0005” increments and it uses readily available triangular positive rake inserts. It does have some minor discoloration on the head.

"A-LEE-SAM" GBTH-XXX A reproduction* of South Bend Lathe's cutter bit grinding fixture's tool holders! This new tool from Alisam Engineering is a reproduction* of South Bend Lathe Works cutter bit grinding block tool holder! Tool holders come in 5 different sizes, 3/16, 1/4, 5/16, 3/8 and 1/2 inch to fit most quality, ground, square modern

Left Hand Turning Toolholder TYPE VNMG STYLE MVJNL 16-4D Turning Toolholder, Type VNMG, Style MVJNL16-4D, Cutting Direction Left Hand, Rake Negative, Rake Angle 13 Degrees , Shank Square, Shank Width 1.000 In, Shank Height 1.000 In, Overall Length 6.0 In, Insert Shape 35 Degrees Diamond, Lead Angle Negative 3 Degrees , Inscribed Circle 0.500 In, Width Offset 1.250 In, Mounting Style Multi-Lock, Clamp CL-30, Clamp Screw XNS-510, Insert Screw NL-46, Shim IVSN-433, ANSI Number MVJNL16-4D.

SPRING BLOWOUT SALE!! This is an American Made Water to Air Heat Exchanger. Limited Supply!

SPRING BLOWOUT SALE!! This is an American Made Water to Air Heat Exchanger. Limited Supply!

INDEXABLE END MILL MADE BY FETTE GERMANY INDEXABLE END MILL CONDITION = NEW THIS IS POSITIVE RAKE INDEXABLE END MILL COOLANT THROUGH ACCEPTS ANY CCMT-32.5_ (1) CCMT-32.51 TIN COATED INSERT