Flexicone Ceramic Al2o3 Drum Ball Mill Fcbm 16

US $32000

Saint Petersburg, Russian Federation
Jun 9th

Open on mobile:
QR code

For sale: Laboratory ball mill is designed for fine dry or wet grinding of material samples with hardness up to 8 units. on the Mohs scale. It can be used in production conditions for processing small batches of material. Mill comes with one ceramic drum 12 lites. Recommended for installation directly on the floor of a room or on a low podium. `Can be equipped with grinding drums with a total capacity of 0.5 to 16 liters . Comes with control panel with a frequency regulator. A laboratory ball mill (drum-roll) can be used to simulate grinding processes in industrial ball mills, wet or dry grinding. Milling, simultaneous mixing and dissolution of the material in a flammable or corrosive liquid is possible. Device: Structurally, the laboratory ball mill is a frame welded from a steel profile and painted with powder paint, on which two rolls covered with special heat-resistant rubber are installed. One of the rolls is driven, it is rigidly fixed to the mill frame and connected to the engine by means of a V-belt. The second roll rotates freely in bearings. The rotation is driven by a 0.55 kW electric motor through a V-belt. The belt is used as standard, it can be bought for replacement at any store. The drive shaft transfers the rotary motion to the grinding drum. Depending on the diameter of the drum, the distance between the rolls must be adjusted. For this purpose, grooves are cut in the frame for displacement of the driven shaft. Thrust rollers are mounted on one of the rolls to prevent axial movement of the drum during rotation. The laboratory ball mill is equipped with one ceramic 12 liters (dm3) drum, as well as grinding media corresponding to the selected drum. Drums can be made of steel St-3 and stainless steel have a wall and bottom thickness of 4 mm as standard. Principle of operation: It is recommended to level the appliance with the surface before grinding. To grind the material, grinding bodies, the product to be ground and, in wet grinding, liquid are placed in the drum. Filling is carried out directly into a drum fixed in a vertical position, after which it is closed with a lid through a gasket. The cover has a reliable and sealed locking mechanism. Directly, the grinding process itself occurs during the rotation of the filled grinding drum and consists of the following actions: Installation of the drum on the rolls of the mill and the installation on the control panel of the rotation speed and grinding time by timer (determined by technology or experimentally). Unloading the drum from grinding media and material. Grinding can be optimized by keeping the drum filling proportion: 28-45% - grinding media; 28-45% - milled material and (or) liquid; The remaining volume must remain unfilled to ensure free impact-abrasive action of the grinding media. Observance of these proportions maximizes grinding time, energy consumption and wear of consumables. Technical characteristics and price of laboratory mill The number of revolutions of the laboratory mill, rpm is regulated by a frequency controller Installed engine power, kW 0.55 Voltage, V220 (380 on request) Drum capacity,l 12 Maximum drum capacity, l up to 16 Working length of shafts, mm 590 Shaft diameter, mm 32 The smallest fraction after grinding, micron 2.0 Number of drums can be installed on the mill, pcs. 1, 2 or 3, depending on the size (volume) of the drum Overall dimensions, mm (length, depth, height) 750 x 400 x 365 Weight, kg 30 (without drum) We can supply ceramic balls Al2O3 at price Au$20/kg. We can supply ceramic drums separately at cost : 12litres -Au$1200 8litres -Au$1000 4litres - Au$ 700 2litres -Au$ 200 PAYMENT DESCRIPTION: 1. Personal & Business Checks (Subject to 10 Banking Day hold) 2. Bank Transfer / Direct Deposit 3% discount for this method of payment 3. PayPal 4. COD we provide 3% discount ( Local Pick Up Only) 5. `Leasing also available SHIPPING DESCRIPTION: Product normally shipped within 1-3 days after receiving payment. The item will be shipped in carton box. Any damage caused by shipping must be reported 7 days from receiving. No Shipments are processed over weekends or holidays. For more info visit us Flexicone.net Thank You and Good Luck!!!

Condition:	New other (see details)	Product Type	Mining equipment
Custom Bundle	No
Non-Domestic Product	No
MPN	UMG2
Model	UMG2
Brand	Flexicone
Modified Item	No
Equipment Type	Ball Mill