floor conduit for sale, brand-new and used.

We have 2970 linear feet of 600 MCM Aluminum Building Wire that has been, and still is, inside aluminum Conduit. We will also be selling all of the conduit in a separate listing. Price listed is per linear foot, 100 foot minimum order.

You are buying all of the following: Greenlee 2, 1 1/12, 1 1/4, 1, 1, 3/4, 1/2, 1/2 inch knockout punch diameter 1) Greenlee 737 leather case in good condition, one 1/2 inch tear on left edge, see first pic, straps and buckles and seams all in good repair2) Greenlee 735 leather case in very good condition, straps and buckles and seams all in good repair Greenlee 737:

This listing is for one used in very good condition Gardner Bender No. 930 for 1/2" thin wall conduit only. Buyer pays $6.00 shipping Priority Mail.

In good condition greenlee no. 738 knockout punch for 2 1/2 inch conduit in box with instructions please look at pics nice tool

pre-owned gently used 2 screw conduit Visit My eBay Store: 2 Rivers Treasures

50 Ft Cable Pullers Conduit Electrical Pipe Feeder Push Rods Rod Nylon Fish Tape If you're looking to pull short runs of electrical wire through conduct, you're sure to find this useful. Nonconductive nylon construction for use in telecom, electrical, wall, and floor conduitSafer pushing and pulling in occupied duct and panel boxes1-1/2" bend radius200 lb. pull strengthInterchangeable terminals and eyeletPIDHBFBB94244

These electric channel outlets were installed in a local dance club. They were placed down both sides of the dance floor at the top front next to the ceiling. There were about 30 different Par 36s mounted to the channels with a single screw, which is still attached.

Conduit bender Truper -thin wall conduit bender 1" (25,4 mm) -heavy wall conduit 3/4" (19mm) •Bends up to 90° •Ribber foot construction for bending on the floor •Made of dectile iron

3/4 INCH CONDUIT COVER, FORM 7

Nice lot of 8, 1/2" emt conduit couplers with locking screws. Standard 1/2" X 1 1/2" long. Please see my other auctions for similar items.

Nice lot of 8, 1/2" emt conduit couplers with locking screws. Standard 1/2" X 1 1/2" long. Please see my other auctions for similar items.

You are bidding on 3 Klein pipe benders in very good shape. The sizes are 1/2", 3/4", and 1". Thank you for looking and good luck.

LIKE NEW CONDITION, BARELY USED BUYER PICKUP OR BUYER ARRANGED FREIGHT Gardner Bender B2000 Cyclone Electric Powered Conduit Bender for 1/2-Inch to 2-Inch EMT, Rigid and IMC Conduit Gardner Bender B2000 is a Cyclone electric powered conduit bender that does one shoe bends from-1/2-Inch to 2-Inch conduit. The Cyclone has the ability to make repeatable bends at the same-Degree. The horizontal and vertical positions allow the unit to create accurate offset bends.

Very nice Greenlee flex splitter. Flexible conduit cutter. Model 1940.

These items are the best matching combination you can get to master the art of bending pipe. 1-Two Klein yellow handles 3/4", 38" LONG CAT. NO.51212 and 1/2" CAT.

Klein Tools 85191 conduit-fitting and reaming tool; appears to be in very nice condition showing little wear and usage. Thanks for Looking!

***One Inch EMT conduit and/or 3/4 Inch Rigid Conduit BENDER is in GOOD Condition. ***100% RETURN ACCEPTED with NO Restocking fees, minus shipping fees only. Item (s) must be Return UNUSED with All Parts, Original Documents and Packing.