floor connection for sale, brand-new and used.

Here is a virtually new centrifugal blower motor from EMB-PAPBST.  The motor was previously installed in an assembly that was damaged by water (the motor was never wet only the chassis of the unit it was in).  The unit was new so the only run-time the motor had was during product testing so probably somewhere in the 2 - 3 hour range. These blowers suck air axially in through the center of the blower wheel and discharge it centrifugally 360 degrees from the side.

THE eBay SHIPPING CALCULATOR IS

.shippingcalculator a { display:block; width: 208px; padding:177px 0px 10px 0p

On auction is Teensy ++ 2.0 and 360 NAND Clip. Used once. What you can see on picture you will receive in mail.

This listing is for a NanoMuscle Toy Development Kit (TDK) with controller, four rotary actuators, cables, documentation and CDROM. The actuators are extremely quiet, nearly silent, position controlled depending on mode selected, slider position, and how/if interfaced through RC servo or auxiliary interfaces. Software can be modified (source provided) to develop own applications.

WAS5 CVC HF 0-20/0-10V. Signal converter/insulator with screw connection. There are six of these isolators available for purchase.

Product description 1, the core module HC-06 from the module, leads interface includes VCC, GND, TXD, RXD, aside LED status output pin, the microcontroller can determine whether Bluetooth is connected via the pin state, KEY pin on the slave invalid 2, le

Item Description: This is corporate surplus in great condition. this is a ferrite brick / flat strip / plate assembly. Unit measurements: 13/16" long 3/8" wide 1/8" thick 16 pin This emi filter fits over the pins on ribbon style connectors.

LCD Display w/ EL Backlight - 2 lines x 24 char - PC-016ATE Used LCD removed from working equipment Model number: PC-016ATE 2 Lines x24 Characters Screens may have some scratches or cosmetic blemishes Character format: 5 x 8 dots EL backlight - requires high voltage source 14 pin header for connection Built in HD44780 controller Module dimensions: 119mm L x 38mm H x 17mm D Viewing area dimensions: 94mm L x 16mm H Weight: 51 grams

The FMPS is an intelligent microprocessor controlled 48Vdc UPS system. The input is powered from either a customer owned 90 to 320Vac power outlet or a hard-wired AC connection. System includes one or two parallel outputs and alarm connections, supporting distances of up to 100 ft between the FMPS and ONT, allowing the FMPS to be located close to existing power outlets.

Brand/Series : G5 SeriesClamping Voltage : 80 VDCColor : RedConnection to Host : Board MountContact Form

This is a used Baldor  VS1MX variable frequency drive (VFD).  This is a M/N:VS1MX22-4 model with 2HP 230V 3  phase. We used this

Time to step up the voltage with this Arduino Relay Board. The Arduino platform is a great way to control lights, buzzers, displays and more - but what if you have a device that doesn't run on the Arduino's native 5 volts? One simple way to do it is to use the RobotGeek Relay.

MODEL GW5 AC WATT or VAR TRANSDUCER W/INTEGRAL SENSOR SPECIFICATIONS: AC WATT/VAR TRANSDUCER ACCURATE TO 0.2% OF READING • Accurate regardless of variations in voltage,current, power factor, or load. • Accuracy maintained over wide temperature range, calibration traceable to NIST. FEATURES APPLICATIONS • Equipment monitoring for process control.

This is an used motor from Minebea Has small cosmetic defects (dents, scratches). The manufacturers Retail Price is $74. We sell it for lot less.

Another custom eBay Auction Template by NelSoniq Design www.nelsoniq.com