floor mounts for sale, brand-new and used.

POST HOLDER FOR OPTICAL BENCH 1 + 5/8 TALL FOR 5/8 INCH DIAMETER POSTS. SEE MECHANICAL DRAWING PICTURE FOR DIMENSIONS. MATTERIAL = BRASS POST HOLDER.

POST HOLDER FOR OPTICAL BENCH 3 + 5/8 TALL FOR 5/8 INCH DIAMETER POSTS. SEE MECHANICAL DRAWING PICTURE FOR DIMENSIONS. MATTERIAL = BRASS POST HOLDER.

Newport Optical Table 30" x 48" x 2.25" Breadboard Honeycomb Vibration Isolation With pneumatic isolation 'table' & an upper frame 'shelf' that mounts with 4 studs on table LW3048B-OPT

Items: Used.They are as new Model: P100-P-H By : Newport Performa Platform Optical Mount, 1.0 in., 2 Allen-Keys, 8-32 threaded hole in the back plate. The P100-P-H Miniature Platform Optical Mount is ideal for general laboratory or industrial applications req

Click Here. Double your traffic. Get Vendio Gallery - Now FREE!

Condition: Purchased new and gently used, these mounts are fully functional (see pictures). Quantity: You are bidding on one (1) mount. I have three available.

Condition: Purchased new and gently used (see pictures) Quantity: You are bidding on a lot of 4 post holders The Newport MPH-3 Miniature Post Holder is 3 inches tall, and is the largest available in the MPH series. It accepts the standard 0.312 inch diameter posts of the Newport MSP series. Its base is drilled and tapped to allow mounting to minature optomechanical positioners and mounts.

The UPA45D1 45° Mirror Holder allows 1 inch (25.4 mm) diameter mirrors to be mounted in U100-A aperture mounts for beam steering applications. They have a clear aperture to allow a transmissive beam to pass through the holder. Item is as shown with .5" pedestal stand and mirror.

Ealing Rail mounts. 1 has all the mm adjustments and 2 are just holders. These are in good used condition although the securing chains have surface rust on them as can be seen in pictures, they are fully functional.

Large Lot of Anodized Aluminum Optical Table parts:2 square legs - 9.5" x 1" x 1" threaded hole at both ends4 round legs 8-1/4" x 7/8" diameter threaded hole at both ends - 3 screws2 Shift supports for 1"3 rod ends or lens holders1 Moutn 1-3/4" x 1-1/4" x 4"1 Base 4-1/8" x 3" x 1/2" with 1" hole1 Base 3-1/2" x 1-0/4" x 3/4"1 Rod with hole 71/2" tal. Rod diameter 1/2". Hole 1" diameter

One sale including these Four separate SD Instruments items Siskiyou Design CR-0.5 Crossed rod clamp, 0.5 inch XC Rotatable probe clamp MXC-8T

Ealing Optical Leveling Mount with Bubble For use with Triangular Wide Bench Rails - Newport/Spindler and Hoyer??? Approx. dimensions: 2.25" long by 2.5" wide by 2.5" high This item was used in an optics testing laboratory on a optical bench with a selection of Ealing, Spindler & Hoyer, and Newport triangular bench rail mounts (see separate auctions for other mounts and rails that we have available) Sold as is; see photos

Small precision kinematic optic mount with screw drives and comes with a 1" diameter mirror coated for high reflectivity at 532 nM. Very similar to Newport, Edmund Optics, Melles Griot, Thor Labs etc. but make is unknown.

ACT\Coleman Machinery Presents: Used: Newport Research Group Isolator Table Mounts Great Condition set of 4

Here are 4 Shure drum mic clamps for your toms or snare drum. This set will fit perfectly on a 5 piece drum kit. One for each tom and one for the snare drum, which is exactly how I used them.

For sale is a used Electroviewer - Model 7215 made by Electrophysics, Fairland, New Jersey, USA. Read Item Condition: Item was purchased as overstock from a government agency laboratory. Item was powered on by pushing the trigger/ button, a green/gray color was observed when the unit was pointed to an object or landscape.

RAM Optical Right Angle Probe, mounts on OMIS system for right angle viewing. Not tested. Sales to USA only.