floor screws for sale, brand-new and used.

Reliance PLC Model 45C15C Unit is old but appears to be in working order. There are no signs of screws on the mounting flange. The rear panel shows no signs of being mounted within an enclosure.

Reliance PLC Model 45C15A. Unit is old but appears to be in working order. There are signs of screws on the mounting flange and one corner flange has a bit of a bend.

Up for Auction - DUFF Ball Screw & Actuators - SK-1802-1/ Model No. 334-03524-000 Used Item has Weight for shipping ... Sold as Is

THIS IS A USED BACK PLATE FOR MOUNTING A SIZE 5 CONTACTOR NUMBER 500-FOD930.THE BODY OF THE CONTACTOR WAS NO GOOD SO I PULLED A FEW PARTS OUT THAT ARE STILL GOOD LOOK FOR THEM IN A DIFFERENT AUCTIONS. YOU WILL ALSO GET THE SCREWS THAT HOLDS THE CONTACTOR TO IT.

used,working great,2 screws missing

ANTIQUE KUNKLE INDIKATOR G-1110 - BRASS FACE - BOTTOM OF INDIKATOR READS: KUNKLE VALVE CO, FT WAYNE, IND, MADE IN U.S.A., DIAL NO. 2-915. INDIKATOR APPEARS TO BE IN VERY GOOD SHAPE ALTHOUGH IT APPEARS THREE SCREWS (?) ARE MISSING.

Up at auction is a Vintage Star Brass Manufacturing Company Pressure Gauge, made in Boston, MA. You see it in its original condition. The patina is great, and yes the glass is cracked.

All Auctions Start at $3.99 Inventory Number:11140461044 Manufacturer: Description: OMRON NT20S-S

.shippingcalculator a { display:block; width: 208px; padding:177px 0px 10px 0p

.shippingcalculator a { display:block; width: 208px; padding:177px 0px 10px 0p

A used small DC permanent magnet generator, plate specs 4.5 volts at 1000 rpm. Generator itself is 3 3/4 inches long, mounted on an aluminum block with an attached wheel.  Has a coax connector attached to lead screws.

.shippingcalculator a { display:block; width: 208px; padding:177px 0px 10px 0p

.shippingcalculator a { display:block; width: 208px; padding:177px 0px 10px 0p

Vintage 6 VDC Automotive Power Relay by RBM 24 Ohms, SPST NO Contacts. No other marking or raiting except the Outpt Switch contacts marked H & B. Has two 6-32 holes on bracket for mounting and 8-32 screws for terminals.

Omron G3PB-215B-2-VD Solid State Contactor, Lot of (3)- These contactors are solid state and typically used where starting and stopping is done frequently, or when controlling an electric heating element with a dc signal and pulse width modulation. These were used in a semiconductor processing machine to control fluid temperature with electric heat. They are rated at 15 amps, 3-phase, and have a control signal of 12-24 vdc.

.shippingcalculator a { display:block; width: 208px; padding:177px 0px 10px 0p