flow regulators for sale, brand-new and used.

Product DetailsGentec Quick Connector Sets - QC-HTPRSPBuilt-in automatic reset check valve prevents reverse flow of gases by cutting off the gases under back pressure.Before disconnection, gas must be shut off at regulators.Color codes provide speed and safety. Built-in automatic reset check valve prevents reverse flow of gases by cutting off the gases under back pressure. Before disconnection, gas must be shut off at regulators.

Quick Connectors is for Gas. Quick connect Gas 28 PSI Max Quick Connect is by KOIKE, These are new old stock Quick Couplers. Available in Hose to Hose; Hose to Torch; or Hose to Regulator.

Quick connect set is for Gas. Quick connect Gas 28 PSI Max Quick Connect is by KOIKE, These are new old stock Couplers. Available in Hose to Hose; Hose to Torch; or Hose to Regulator.

Quick connect set is for Gas. Quick connect Gas 28 PSI Max Quick Connect is by KOIKE, These are new old stock Couplers. Available in Hose to Hose; Hose to Torch; or Hose to Regulator.

Edge® ST 900FC Cutter Select® includes Edge® ESS3 regulators for Oxygen and Acetylene Victor ST 900FC cutting torch 90 degree head angle.(Cutting Oxygen Handle Mounted Top-Rear) Built-in flashback arrestors and reverse flow check valves You must choose your "acetylene inlet" based on the type of acetylene tank you have. If your tank valve has male threads, you should choose a CGA 300 (female) regulator. Note: will not fit "B" or "MC" acetylene cylinder.

Victor 0781-5154 Edge ESS4-40-540 AIR, Oxygen, Inert Gas Regulator Innovative new EDGE Series Regulators Offer Safety and Advanced Design. Guages are recessed into the body for the highest level of safety and prtection possible. More efficient intenal flow paths translate to improved flow consistancy from full to empty cylinders.

Victor style medium to heavy-duty gas welding, cutting and heating outfit with 450 style regulators Deluxe accessories, weld up to 3/8-Inch (952 mm), cut up to 6-Inch (152 cm) and heat with the proper tip

This is a Brand New UL Harris-Type Oxygen/Acetylene Cutting/Welding Torch Kit! UL approved - This Auction Will SELL at ANY BID!! This is a brand new in the box complete Harris compatible torch outfit.

NEW! SMITH STAGE 2 OXGEN REGULATOR P/N - 35-125-540 Smith's Series 35 two stage regulators drop cylinder pressure to working pressure in two stages for consistent and accurate outlet pressure and flow regardless of inlet pressure. These regulators are recommended where outlet pressure and flow must be maintained without variation.

Here is a Lincoln Wire Matic 255 mig welder as shown, single phase input, with Magnum SG spoolgun, everything works well, including thee spoolgun. It could use a new drive roll for the built in wire feeder as it does slip sometimes. No gas leaks that I could detect (hear), this unit comes with the dual cylinder rack on the back along with separate flow r

DENTAL MCKESSON NITROUS OXIDE FLOW METER PROBABLE CART#21-131

DENTAL MCKESSON NITROUS OXIDE FLOW METER PROBABLE CART

Adec 6220 Dental Nitrous Oxide N20 Flow meter Regulators ( Oxygen and Nitrous Regulators) And accessories for wall mou

Payment Policy Brand New Sony CyberShot 8 MP Di

Biotech Bargains California Payment Shipping Return Policy About Us