Fluke Networks 635A QuickBERT-T1 Handheld T1 Tester 635 Calibrated New Battery, US $578.95 – Picture 0

Fluke Networks 635A QuickBERT-T1 Handheld T1 Tester 635 Calibrated New Battery, US $578.95 – Picture 1

Fluke Networks 635A QuickBERT-T1 Handheld T1 Tester 635 Calibrated New Battery, US $578.95 – Picture 2

Fluke Networks 635A QuickBERT-T1 Handheld T1 Tester 635 Calibrated New Battery, US $578.95 – Picture 3

Fluke Networks 635A QuickBERT-T1 Handheld T1 Tester 635 Calibrated New Battery, US $578.95 – Picture 4

Fluke Networks 635A QuickBERT-T1 Handheld T1 Tester 635 Calibrated New Battery, US $578.95 – Picture 5

Fluke Networks 635A QuickBERT-T1 Handheld T1 Tester 635 Calibrated New Battery, US $578.95 – Picture 6

Fluke Networks 635A QuickBERT-T1 Handheld T1 Tester 635 Calibrated New Battery, US $578.95 – Picture 7

Fluke Networks 635A QuickBERT-T1 Handheld T1 Tester 635 Calibrated New Battery, US $578.95 – Picture 8

Fluke Networks 635A QuickBERT-T1 Handheld T1 Tester 635 Calibrated New Battery, US $578.95 – Picture 9

Fluke Networks 635a Quickbert-t1 Handheld T1 Tester 635 Calibrated New Battery

US $578.95

Las Vegas, Nevada, United States
Mar 29th

Open on mobile:
QR code

Manufacturer: Fluke Networks Model#: 635A QuickBERT-T1 Nomen: T1 Test Set Condition: Used/Excellent/Fully Operational - Includes New Battery Pack Return Policy: 14-Day The Fluke 635 includes all the basic T1 testing capabilities you would expect in a larger and more expensive tester. It performs bit-error tests, detects framing type, line coding and bit pattern, and displays signal level, frequency, clock slips, errors and alarms. The 635 transmits the most commonly used loop codes, including HDSL. Full, unframed and fractional (56k and 64k) T1 are supported, along with display of signaling and data bits and capture of DTMF digits. Plus, individual voice channels may be monitored on the built-in speaker or over a headset. Eleven standard BERT patterns are available, including a 64-bit user-defined pattern. The 635 also includes a 'through' mode where the incoming pattern is retransmitted. Errors - including bipolar violations, logic and frame bit - can be injected to confirm proper handling by the network. Two receivers permit detection of any clock slips. Multiple receiver input types allow terminated, bridged or monitor (DSX) connections. Either recovered or internal clock references can be selected. AMI or B8ZS line coding can be transmitted and received, and SF, ESF, SLC96 and unframed framing are supported. The 635 is compact, rugged and easy to use. Just plug it in and you can immediately see essential information without scrolling through layers of menus. The 635 automatically detects framing and line coding type and instantly displays any errors or alarms. A history indicator helps track intermittent problems. Features & Specifications Primary T1 Receiver Range, Bridge: 6 to -36dB Range, Term: 6 to -36dB Range, Monitor: -15 dB to -24dB Framing: NONE, D4, ESF, SLC 96 Line coding: AMI, B8ZS Patterns: QRSS, 1 IN 7, 2 IN 8, 3 IN 24, ALL 0'S, ALL 1'S, 1:1, NET55, OCT55, DALY55, USER (default = 1:16) Status/history: AMI (status only), B8ZS, Signal Present, Out of Frame, Blue Alarm (AIS), Ones Density, Excess Zeros, Yellow Alarm, DS1 Idle Signal (all Tx patterns are frame aligned), Pattern Sync Loss DS0 drop: Selected DS0 channel to eight data bit LEDs and speaker DS0 signaling types: Robbed Bit, CCIS, E-Bit DS0 Signaling Bits: A, B, C, D Reference T1 Receiver Range: 0 to -36dB Compatibility: AT&T TA24/CB113 Transmitter Output Line Codes AMI or B8ZS Framing: NONE, D4, ESF, SLC96 Frequency: 1544000Hz ±5ppm Patterns: QRSS, 1 IN 7, 2 IN 8, 3 IN 24, ALL 0'S, ALL 1'S, 1:1, NET55, OCT55, DALY55, USER, THRU LBO: Fixed at 0dB Tx clock source: Internal, derived from received data, or external Loop codes: CSU, NIU4, NIU5, NETWRK (ESF), LINE (D4), LINE (ESF), PYLD (ESF), ARM (D4), ARM (ESF), HTU-R,HTU-C, HRE1, HRE2, NREM, NLOC, NDU1, NDU2, CREM, CLOC, CDU1, CDU2 Specification Compatibility ANSI T1.403 AT&T PUB62411 Connectors Rx T1 Receiver Term/Mon/Bridge: Bantam jack Tx T1 Transmitter: Bantam jack Ref T1 Receiver: Bantam jack Auxiliary power: DC power jack Headset: 3.5 mm phone plug- stereo Results Display: 4 x 20 liquid crystal display (LCD) Clock slips: Positive number means reference clock faster; negative number means slower Errors: BIT ERR, BPV ERR, FRM ERR, CRC ERR, FREQDEV Signal: DS1 Freq, DS1 Level, DS0 Freq, DS0 Level DS1 Freq accuracy: ±5ppm, 32° to 104°F (0° to 40°C) DS1 Freq resolution: 1Hz DS1 Freq range: 1544000 ± 10,000Hz DS1 Level range: 6dBDSX to -40dBDSX DS0 Freq accuracy: ±1.5Hz DS0 Level accuracy: ±0.2dBm Power Battery Pack: Rechargeable, nickel metal hydride (NiMH); 3.5 amp-hours Battery life: Approximately six hours of continuous operation Low battery: Red LED illuminates, indicating recharge is needed Auxiliary power: 9 to 12VDC, 1000mA Physical Size: 1.75" H x 5" W x 9" L (4.4cm x 12.7cm x 22.8cm) Weight: 1lb, 10oz (0.7kg) Accessories Included Carrying case Two extra Bantam cables AC power adaptor/battery charger New battery pack (installed)

“Excellent working condition. Fully tested works great. Actual Item Pictured. Includes new battery pack.”

Brand	Fluke Networks
Model	635A