flywheel pulley for sale, brand-new and used.

This is the flywheel hub and pulley off of a Maytag engine, the hub is in great shape and I wish I could say the same about the pulley but obviously I can't, its beat up, its bent in numerous spots and the pulley hub is cracked, but the flywheel hub is in really good shape, any questions just ask, thanks

This is the flywheel off of my single cylinder Maytag engine, its in great shape, has the magnet, governor, flywheel hub, and a great shape pulley but the pulley hub has some cracks as you can see in the pictures, any questions just ask, thanks

This flywheel pulley has 3 mounting bolt holes which are all 9-1/2" on center. The bolt holes are 1/2" dia. It is for an Economy gas engine.

NEW or like new 14.5 inch cast iron dual belt pulley / sheave / flywheel designed for an air compressor pump. Looks unused with no wear and 99% of OEM black paint. Center bore is for a tapered crankshaft.

This auction consists of an antique flat pulley or flywheel for a small stationary engine. It measures approximately 7-inches in diameter. The center hole is approximately 1-1/4 inch and it's 3-1/8 inch wide.

Model

Model

Please Call Eaton Compressor Or E-mail For Lead Time!! 937-540-1143 Model number: Model : PP10H120V3 Description

Model# PP07V080Y1 **Please Call Eaton Compressor At 877-283-7614 or Email Us At megan@polarcompressor.com For A Lead Time**

Model# PP05H080V1 **Call Eaton Compressor At 877-283-7614 or Email Us at megan@polarcompressor.com For A Lead Time** **ACTUAL TANK CONFIGURATION MAY VARY**

Model# PP05H080V1 **Call Us At 877-283-7614 or Email Us at megan@polarcompressor.com For A Lead Time / Shipping Quote**

(2) Flywheel Castings Un-machined. 10" Rough Diameter NO cast in Counterbalance Rim 1" wide ( As seen in Photo) 7-1/2" inside the rim Diameter 1-3/8" Hub Diameter 1-3/4" wide, equal stick out on each side. Spokes 1" wide and 1/2" thick.

You are bidding on an excellent running, rare 4hp Domestic sideshaft hit and miss engine with the factory water pump attachment. The engine is mechanically almost perfect, very strong holding compression and very minimal wear on all the moving parts. Only thing missing is the crankguard.

AIR COMPRESSOR REPLACEMENT PUMP PT03A EAGLE COMPRESSOR PUMP NEW Eagle bare PT03A Bare replacement compressor pump Single stage pump requires 5 horsepower ELECTRIC motor or 11 horsepower GASOLINE engine to deliver 18.5 CFM at 100 psi Fits Eagle compressors C5160V1, C5360V1 and C5560V1. Also replaces Ciasons S-302W Three cylinder single stage pump delivers a maximum of 18.5 cubic feet per minute at 100 psi, maximum pressure range for this pump is 135 PSI.

Ok folks, what we have here is a Lauson small engine flywheel that works with a Eiseman model 71R magneto. Serial number 47-1 from what I can read. A-23402 is another number I found.

Call or Email For Lead Time / Shipping Quote APP3Y0518S 18CFM Air Compressor Pump Specifications: Solid cast iron 3 cylinder piston se

Call with any questions - FACTORY DIRECT - 508-230-7118 Call with any Questions; 508.230.7118 We stock hundreds of pumps on all different sizes. These two stage bare units come complete with inlet filters and flywheel. These two stage bare units are efficient over 80-psi applications.