GOOD USED HYDRAULIC POWER UNIT WITH 2HP BALDOR 3 PHASE 208-230/460V 1725 RPM MOTOR WITH TANK AND RELIEF VALVE. THE HOSE, PIPE FITTINGS AND VALVE FROM THE ATTACHED TEST RIG IS NOT INCLUDED- I USED THAT TO TEST THE UNIT- WORKS FINE. BUYER PAYS FREIGHT SHIPPING FROM 30527.
USED SIGNODE PNEUMATIC COMBINATION BANDING MACHINE. TENSIONS, AUTO FEEDS AND CRIMPS THE CLIP, AND CUTS OFF THE EXCESS BAND. THIS UNIT IS COMPLETE AND CURRENTLY SET UP FOR 5/8 STEEL STRAPPING, CAN BE SET UP FOR 3/4" WITH ADDITIONAL PARTS AND/OR ADJUSTMENT.
GOOD USED PANEL SAW, BLADE NOT INCLUDED014-10-03-30-47 PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHASE Contact me for freight cost (applies only to items shipped by truck freight)
very nice cleveland die head .013-011-04-20-003 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works
NICE BEADER WITH A FEW SETS OF ROLLS. WORKS GREAT.014-10-03-135-009 PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHASE Contact me for freight cost (applies only to items shipped by truck freight)
NICE PEXTO 622LR WITH ROLLS. WORKS GREAT.014-10-03-135-009 PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHASE Contact me for freight cost (applies only to items shipped by truck freight)
used very good condition troyke rotary table with integral 12" XY cross slide. buyer pays freight on 310lbs from 30527 or free local pickup in north georgia014-12-19-tg2507 PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHASE Contact me for freight cost (applies only to items shipped by
FACE PLATE WITH LARGE WELDED SHAFT CAN BE CHUCKED IN YOUR LATHE SO YOU DON'T HAVE TO REMOVE YOUR CHUCK TO DO OCCASIONAL FACEPLATE WORK. WORKS GREAT.014-12-12-T-68-007 PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHASE Contact me for freight cost (applies only to items shipped by truck freight)
approx 5/8 thick. 47 lbs net weight013-02-02-58/850 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works
8" cam action drill press vise, works great. 014-09-09-ap#3 PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHASE Contact me for freight cost (applies only to items shipped by truck freight)
8" cam action drill press vise, works great. 014-09-09-ap#2 PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHASE Contact me for freight cost (applies only to items shipped by truck freight)
8" cam action drill press vise, works great. 014-09-09-ap PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHASE Contact me for freight cost (applies only to items shipped by truck freight)
hand held heat sealing iron adjustable thermostatically controlled temp up to 800 degrees, 6" x 3" metal platen. works great. if the listing says 2 available, you get the one in photo 1, if the listing says 1 available, you get the one in photo 2.
Guraranteed not DOA nestal injection molder circuit board 110.240.779/778e used with INTEL DAUGHTERBOARD PSBX279A PBA510849-004 unused or good take out. THE INTEL DAUGHTERBOARD IS NOT INCLUDED. buyer pays usps priority mail flat rate box shipping on 3lbs from 30527 009-26 PLEASE READ BEFORE BIDDING:
Guraranteed not DOA nestal injection molder circuit board unused or good take out. 110.240.8679 ..... part number 110.240.8680b/01 also appears on one of the connectors.
Guraranteed not DOA nestal injection molder circuit board unused or good take out. cpu286 110.240.7771 part number 110.067.9368 or 110.240.7771g/05 also appears on one of the connectors- specify which you want when making your payment. buyer pays usps priority mail flat rate box shipping on 3lbs from 30527 009-26 PLEASE R
This lincoln magnum sg spool gun has been run once to test, and thats it. Dusty from shelf storage. see my other listings for compatible idealarc sp-250 mig welders with adapter box capable of running this gun.014-08-03-650-02-1 PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHASE
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.