forklift wheel lift for sale, brand-new and used.

Dayton Hydraulic Platform Lift Manual Forklift 2MPT4 Has minor abrasions, scratches, dents from shipping. Bottom section had some paint spilled on in transit; most has been cleaned off. Dayton Fork and Platform Lifts are designed for manual lifting, lowering, and transporting of loads on firm and level surfaces, including workshops, warehouses, stockrooms, receiving departments, throughout a plant, and wherever aisles and congested areas prevent the use of larger equipment.

USED 1HP 10" VAN DORN PEDESTAL BUFFER/GRINDER, WITH 2 SMALL NON WOVEN ABRASIVE WHEELS. 3 PHASE 220 OR 440V CORD AND PLUG NOT INCLUDED. QUALITY UNIT, WORKS WELL.

GOOD USED BALDOR GRINDER, WORKS GREAT, 1 NEW SIDE COVER, 3 PHASE POWER 208-230/460. COMES WITH A NEW GRINDING WHEEL AND OLD WIRE WHEEL MOUNTED. TOOL RESTS ARE NOT ORIGINAL.

GOOD USED BALDOR GRINDER, WORKS GREAT, 1 NEW SIDE COVER, 3 PHASE POWER 208-230/460. COMES WITH A NEW GRINDING WHEEL AND WIRE WHEEL MOUNTED. ONE TOOL REST IS NOT ORIGINAL.

For sale manual forklift made by Dayton model 2MPT8. Asking $500. Local pickup only in Richmond, VA area.

Jet jwbs-14os bandsaw, works great, used very little. 115vac, with 4 blades Part Number: 708113A Cutting Capacity Width: &

You are considering a Standard Electrical "Cadet" series pedestal grinder. This grinder is used but appears to be in good overall condition. We have tested this grinder here and it runs smooth with no excess noise that would indicate bearing problems.

Here’s a Cincinnati Delavan; 5 HP, 25 GPM, 50 gal, Hydraulic Power Unit / Pump + Solenoid Valve 4 Separate Double Acting Vickers Solenoid Valves + Control Panel! See Running Pictures L-O-O-K... Includes Square D, 30 Amp, 600 Volt Safety Switch/Fuse Disconnect,

Please note, the price is for the Forklift plus shipping cost by sea to your local port only, so it will take around 45 days for shipping. the price do not cover tax and shipping agent service fees in your end. Product Information

CO23 hydraulic CUT-OFF SAW The Stanley CO23 Cut-Off Saw was designed for underwater use but it is also a very useful tool on land as well. The CO23 uses standard 10 inch (25.4 cm) diameter abrasive or wet or dry diamond blades for cutting metals or concrete. FEATURES: 10-15 gpm (38-57 lpm) operating range.

This is a Servend counter top ice dispenser. Model# M-45. It is 15w x 28d x 28h.

var itemNumber = window.ebayItemID ?

Please read before bidding: If you have immediate questions or want to save 10% call 602-908-3006. IF PAYING WITH PAYPAL, I WILL ONLY SHIP TO THE ADDRESS THEY PROVIDE. IT'S THEIR RULES, NOT MINE!

This is a Servend counter top ice dispenser. Model# M-90. It is 15w x 28d x 33 1/2h.

This is an older turntable shrink wrapper. Must be used with forklift to lift pallets. Turn table has new casters and drive wheel.