Franmar Soy Gel - Paint Urethane Remover 55 Gal - Green

US $2,910.95

Warren, Michigan, United States
Jan 31st

Open on mobile:
QR code

Soy Gel™ Paint and Urethane Remover 55 Gallon Drum Want a better way to remove paints, urethanes, acrylics, epoxies, and enamels without the back-breaking work of sanding and chiseling? Made with 100% American Grown Soybeans, SOY Gel does all that and more. Throw out the sand paper and put away the knee pads. Just put some SOYGel on the coating to be removed, allowing you to work on another project. Let SOYGel do the work, not you! Within minutes you can see the power of SOYGel start to lift the coatings, all while you spend time on other tasks. Not sure how many coats need to be removed? SOY Gel doesn't care. One coat, five coats, twenty coats, SOY Gel will remove them all and leave you smiling. In addition Soy Gel goes a long way, with one gallon giving you up to 200 sq. ft. coverage. That's THREE times the coverage of most traditional strippers!! With SOY Gel you won't have to deal with harsh odors that we all know so well with other strippers. No odor SOY Gel is the perfect helper for anyone wanting to remove paints, urethanes, and enamels. Easily Remove MULTIPLE LAYERS of Paints, Urethanes, Concrete hard surface sealers, Acrylics, Epoxies - single and two part (two part solid count must be lower than 40%) APPLICATION: SOY-Gel is safe to use on wood, brick, stone, metal, plaster, concrete, and many other surfaces. Do not use on plastic, PVC, rubber or dry wall. SOY•Gel may be used indoors or outdoors. When used outdoors, protect plant and vegetation with a plastic drop cloth. SOY Gel may be used on vertical as well as horizontal projects. Apply a thick, even layer of SOYGel, generally between 1/16 and 1/8 inch to the coating to be removed by using pouring, brushing, or airless sprayer (piston pumped with tip of 519 or similar). If applying with brush, do not apply as you would paint. Don’t brush or scrape the surface until the stripper has had time to work. Check the progress of the stripping action by using a scraper to see if the coating is softened down to the surface. If not, wait longer and recheck. SOY-Gel will remain wet and working for several hours. Longer is better. Let the stripper do the work. If SOY-Gel is left to sit outdoors, cover with a light plastic drop cloth to prolong the stripper's wet time. Once the coating is softened, remove it with a scraper, industrial wet vacuum, or other stripping tool. Reapply stripper, if necessary. Repeat steps above. After use, clean remaining thin residue with water, using a scrub brush and/or mop or power washer. Ensure to scrape or vacuum excess removed coating and SOY-Gel before using a power washer for final cleaning. Always use care to prevent over spray from getting on surfaces other than the one being prepped. Allow surface to dry before further preparations. • Flash Point: Above 200°F • pH Level: 6.80 pH of 1/10 wt/wt solution in soft water. • Vapor Pressure: Not determined • Odor: Mild Odor • Conditions to avoid: Strong oxidizing agents. • Health Hazards: May cause moderate eye irritation. May cause delayed skin irritation. May be harmful if swallowed in large amounts. • Packaged:, Gallon • Coverage: Horizontal - Up to 200 sq. ft. per gallon Vertical - Up to 130 sq. ft. per gallon ALSO AVAILABLE IN 5 GALLON, 1 GALLO, & QUART CONTAINERS - VISIT OUR STORE FOR DETAILS Chek out the following link for more info on Franmar SOY GEL Soy Gel TIP SHEET Single Page MSDS ANSI 16 MSDS Any further questions, comments, or concerns, feel free to give us a call at 1-800 227-8479 We are open for business 8:30am-6:00pm EST. Thank you for your business. NORKAN INC 26200 Groesbeck Hwy. Warren, MI 48089