+ Post new Ad
**FREE BITS** Conquest Construction Drill, 23 Spindle, US $6,960.00 – Picture 0
**FREE BITS** Conquest Construction Drill, 23 Spindle, US $6,960.00 – Picture 0

**free Bits** Conquest Construction Drill, 23 Spindle

US $6,960.00

  • Bonita Springs, Florida, United States
  • Jan 30th
Open on mobile:
QR code
**COMPLETE SET OF NEW FREE BITS** **Offer Ends November 26th** **For more quotes on any machine please call 239-272-1390 or 239-250-1528** Why Construction Drill Line Boring Machine? Model# BO173 Pneumatic Drill Operation. TEFC Baldor Motor(s).  Telemechanique Control System.  Heat Treated Steel Helical Gears. Dedicated Horizontal Configuration.  Quick Adjust Horizontal Fences For "Out Of Square Panels". Individual Vertical Head Available (Eliminates Loss Of Accuracy Over Time Sometimes Experienced With Flip UP/Flip Down Machines.) Standard Specifications:Operating pressure of 80 - 100 psi. 23-spindle line boring head with steel heat treated helical gears. 32mm centers, distance between first & last drill = 27.7". TEFC Baldor motor(s), 3,450 rpm, 2 hp - 230 volt (5.9 amps) 60 Hz Single Phase, turns off when pedal released. Accepts bits with 10mm shank, one flat side, 12 lefts & 11. Machine weight = 1110 lbs & 1175 lbs crated **For more quotes on any machine please call 239-272-1390 or 239-250-1528** **Don't forget to check out our wide range of New Machinery & our Used Machinery too!**
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Conquest Industries
MPN BO161,BO161H, BO162, BO162H, BO151, BO151H, BO152,
Model 13 Spindle Boring Machine

Directions

Similar products from Other Woodworking Equipment & Machines

Northtech NT20153 Shaper, 440 V, 3 PH, 5 HP

Northtech NT20153 Shaper, 440 V, 3 PH, 5 HP

  • Sheboygan, Wisconsin, United States
  • Jan 30th
NEW WINPAK 187012 STAINLESS SUPPORT CROSS BAR 19X1/2X1IN ASSEMBLY B326022

NEW WINPAK 187012 STAINLESS SUPPORT CROSS BAR 19X1/2X1IN ASSEMBLY B326022

  • Buffalo, New York, United States
  • Jan 30th
Stainless Steel SS Cyclone 19' With 12" x 33" Inlet

Stainless Steel SS Cyclone 19' With 12" x 33" Inlet

  • Island Falls, Maine, United States
  • Jan 30th
Fuji Dust Collector System (Fuji FR-504HFKS and Fuji FV-300R-3MLK)

Fuji Dust Collector System (Fuji FR-504HFKS and Fuji FV-300R-3MLK)

  • San Jose, California, United States
  • Jan 30th
Delmac (DMG) 62 CT Contour Bander Trimmer, 230 V, Single Phase

Delmac (DMG) 62 CT Contour Bander Trimmer, 230 V, Single Phase

  • Sheboygan, Wisconsin, United States
  • Jan 30th
Delmac (DMG) 60 CB Contour Edgebander

Delmac (DMG) 60 CB Contour Edgebander

  • Sheboygan, Wisconsin, United States
  • Jan 30th
POWERMATIC SINGLE 2A END TENONER

POWERMATIC SINGLE 2A END TENONER

  • Belleville, Illinois, United States
  • Jan 30th
Powermatic 26 & 27 wrench for the 1" spindle also Powermatic 66 saw etc.

Powermatic 26 & 27 wrench for the 1" spindle also Powermatic 66 saw etc.

  • Alpharetta, Georgia, United States
  • Jan 30th
Wood's Vacuum lifter Manual Tilt 1200 Pound capacity Model MT8AIR

Wood's Vacuum lifter Manual Tilt 1200 Pound capacity Model MT8AIR

  • Laurel, Montana, United States
  • Jan 30th
**FREE BITS** Conquest Standard 13 Line Borer Pneumatic 230V/1PH W/Hinge Unit

**FREE BITS** Conquest Standard 13 Line Borer Pneumatic 230V/1PH W/Hinge Unit

  • Bonita Springs, Florida, United States
  • Jan 30th
Lot of 6 SCM Upper Dust Hoods for Double End Tenoner

Lot of 6 SCM Upper Dust Hoods for Double End Tenoner

  • Unionville, Pennsylvania, United States
  • Jan 30th
AERCOLOGY WELD AIR PORTABLE AIR CLEANER WV-4000C

AERCOLOGY WELD AIR PORTABLE AIR CLEANER WV-4000C

  • Cedarburg, Wisconsin, United States
  • Jan 30th
Hoffmann MU2-P Pneu. Bench-Top Machine with Custom Table

Hoffmann MU2-P Pneu. Bench-Top Machine with Custom Table

  • South San Francisco, California, United States
  • Jan 30th
Ritter R700 Sander with tilting worktables

Ritter R700 Sander with tilting worktables

  • Millville, New Jersey, United States
  • Jan 30th
ROCKWELL-INVICTA RS-15 RS15 43780 INDUSTRIAL SHAPER ***ONTARIO, CALIF*** *DELTA*

ROCKWELL-INVICTA RS-15 RS15 43780 INDUSTRIAL SHAPER ***ONTARIO, CALIF*** *DELTA*

  • Ontario, California, United States
  • Jan 30th
Powematic 26 Shaper 5 Hp

Powematic 26 Shaper 5 Hp

  • Piedmont, South Carolina, United States
  • Jan 30th
Forward Reversing Switch

Forward Reversing Switch

  • Ogden, Utah, United States
  • Jan 30th
Clausing Lathe 5900 Series Crossslide Screw Assembly - With Gib / Complete

Clausing Lathe 5900 Series Crossslide Screw Assembly - With Gib / Complete

  • Frankfort, Kentucky, United States
  • Jan 30th
Delta Rockwell Unisaw Motor Pulley, LTA-431 5 1/2" Dia. For 1725 RPM. Motor

Delta Rockwell Unisaw Motor Pulley, LTA-431 5 1/2" Dia. For 1725 RPM. Motor

  • Cathlamet, Washington, United States
  • Jan 30th
Replacement Filter Bag For Elastic Band 708695

Replacement Filter Bag For Elastic Band 708695

  • Murrieta, California, United States
  • Jan 30th

People who viewed this item also vieved

Wood-Mizer LTAGA Automatic Sharpener Portable Sawmill Bandsaw Operators Manual

Wood-Mizer LTAGA Automatic Sharpener Portable Sawmill Bandsaw Operators Manual

  • Woodbridge, Virginia, United States
  • May 30th
Wood-Mizer LTTSG Tooth Setting Guage Portable Sawmill Bandsaw Operators Manual

Wood-Mizer LTTSG Tooth Setting Guage Portable Sawmill Bandsaw Operators Manual

  • Woodbridge, Virginia, United States
  • May 30th
Craftsman Radial Arm Saw

Craftsman Radial Arm Saw

  • Middle River, Maryland, United States
  • May 30th
Heavy Duty Plate Joiner Kit

Heavy Duty Plate Joiner Kit

  • Lindenhurst, New York, United States
  • Jun 1st
POWERMATIC 6" X 48" BELT SANDER w/12"DISC Model 30A / 3 Phase

POWERMATIC 6" X 48" BELT SANDER w/12"DISC Model 30A / 3 Phase

  • Edison, New Jersey, United States
  • Jun 1st
Whirlwind Model 700 Profile Sander Tilting Head Variable Speed Nice Condition

Whirlwind Model 700 Profile Sander Tilting Head Variable Speed Nice Condition

  • Hudson, New Hampshire, United States
  • Jun 1st
Delta/Rockwell 15" Drill Press - Column Base - Column Size is 2 3/4" Dia.

Delta/Rockwell 15" Drill Press - Column Base - Column Size is 2 3/4" Dia.

  • Grand Rapids, Michigan, United States
  • Jun 4th
ELECTRO-VULC MARK I MOLD VULCANIZER HAECHTEL PRESS JEWELRY ~GUARANTEED WORKING!!

ELECTRO-VULC MARK I MOLD VULCANIZER HAECHTEL PRESS JEWELRY ~GUARANTEED WORKING!!

  • Canoga Park, California, United States
  • Jun 5th
Sears Craftsman Heavy Duty 15 1/2" Drill Press with Tilt Table Attachment

Sears Craftsman Heavy Duty 15 1/2" Drill Press with Tilt Table Attachment

  • Cumberland, Maryland, United States
  • Jun 5th
Panno 3d Model STL for CNC Router Engraver Machine Relief Artcam 0095

Panno 3d Model STL for CNC Router Engraver Machine Relief Artcam 0095

  • Великий Устюг, Вологодская обл., Russian Federation
  • Jun 16th
Bench Multifunctional Woodworking machine for Planing/ Sawing/ Drilling 220V

Bench Multifunctional Woodworking machine for Planing/ Sawing/ Drilling 220V

  • CN,CN, China
  • Jun 16th
28 in 1 STL 3d Models for CNC Router Engraver Machine Relief Artcam Animal Pack

28 in 1 STL 3d Models for CNC Router Engraver Machine Relief Artcam Animal Pack

  • Великий Устюг, Вологодская обл., Russian Federation
  • Jun 16th
Centauro T4-1600 Copy Lathe w/ AG-125 Tool Grinder

Centauro T4-1600 Copy Lathe w/ AG-125 Tool Grinder

  • Stone Mountain, Georgia, United States
  • Oct 24th
Used wood lathe (cuemakers)

Used wood lathe (cuemakers)

  • El Paso, Texas, United States
  • Oct 24th
New NOVA CHUCK INSERT 5/8" PLAIN BORE CODE: IFNS

New NOVA CHUCK INSERT 5/8" PLAIN BORE CODE: IFNS

  • Alpharetta, Georgia, United States
  • Oct 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies