gage 8 for sale, brand-new and used.

GAGE CS11G8 Cobra 8 Bit High Speed PCI Digitizer 1 Channel 500 Mhz Bandwidth Used Condition GAGE CS11G8 Cobra CompuScope 8 Bit High Speed PCI Digitizer Board 1 Channel @ 1.0 GS/s 500 Mhz Bandwidth 50 ohm http://www.gage-applied.com/digitizers/8-bit/pci/compuscope-cobra.htm

GAGE LAB11G8 Cobra 8 Bit High Speed PCI Digitizer 2 Channel Used Condition GAGE LAB11G8 Cobra CompuScope 8 Bit High Speed PCI Digitizer Board 2 Channel http://www.gage-applied.com/digitizers/8-bit/pci/compuscope-cobra.htm

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos

This is some sort of flatness gage by the L. S. Starrett Company.

Starrett #657D Magnetic Base with Upright Post Assembly. Magnetic Base, size 1-15/16" x 1-5/8" x 1-7/8" (50x40x48MM) deep. There's1/4 - 20 NC tapped hole in side of base for indicator mounting post, with push button on/off switch for one hand operation.

Features: Close tolerance inspection of bores or size, roundness, ovality and taperAGD group 2 dial indicator is fully protected by rugged cover to minimize potential shock in the machine shop environment.Various anvil sizes are provided in each set to achieve desired measurement range.

STARRETT Radius Gage Sets - Model: S167CHZ Measuring Range: 1/64"~ 17/64",1/32"~ 1/2" Number of Blades: 25 Increments: 64ths 32nds of an inch 50619 RADIUS GAGE SET - STARRETT

SPI Radius Gage Set 10-30-310 1/64"-1/2" Made In Japan **2 Pieces Not Original** This gage set is in very nice overall condition and works as it should. The 1/16" gage is a Starrett and the 1/8" gage is unmarked. All other gages are marked SPI.

Up for bids is this excellent condition Starrett RS30A1 gage block set. This set is complete except for one .020 wear block as you can see in the pictures. Starret gage block set of 30 Pcs.

SHARS 2-3" MECHANICAL DIGITAL OUTSIDE MICROMETER .0001" NEW *0-1 MICROMETER PICTURED* Product Code 303-2405 Product description Range: 2-3" Resolution: .0001" Accu

Mitutoyo 571-262-10 Absolute Digimatic Depth Gage; 0-8"/ 200mm Rating IP67 Electronic Digital Depth Gage (NO HOOK)SPC Output: YES

Click Here. Double yo

Made by Baldor Electric Co. This is a Baldor 6" Carbide Tool Grinder Miter Gage. Model #: HA1029A01 SPECIFICATIONS: Miter Angle: 45 - 0 - 45 degrees Slot Bar Size: 1/2" wide x 1/8" high Fence Size: 3" wide x 1" high Overall Dimensions: 3" x 4'' x 1-1/8'' high Comes exactly as shown in pictures.

Have a set of 12 angle gage blocks, includes the following angle degree blocks 1, 2, 4, 6, 8, 10, 12, 13, 14, 15, 30 & 45. These are used but still in good useable condition. There is no manufacture marked on the blocks.

579A Telescoping Gage