+ Post new Ad
Gairing 3pc SET Quick change Adapter tool holder counterbore cutter countersink, US $98 – Picture 0
Gairing 3pc SET Quick change Adapter tool holder counterbore cutter countersink, US $98 – Picture 0

Gairing 3pc Set Quick Change Adapter Tool Holder Counterbore Cutter Countersink

US $98

  • Grand Rapids, Michigan, United States
  • Jun 12th
Open on mobile:
QR code
  This is a nice used master holder for holding cutters that have the Gairing hex drive shank, Devlieg also makes this same system but I am not sure if they are interchangeable. It is equipped with 2 cutters. The hex shank measures about .744" across the Flats.  The round section measures .905" diameter at the large end of the taper. Made in the USA by Gairing Detroit MI, one cutter is made by Murdoch and one by WCT, all are US America Overall Length of the holder alone is 7-1/2" Shank size Morse Taper #4  4MT  MT4 The 3 Flute carbide tipped counterbore is 1.187" cutting diameter, still coated in plastic and super sharp and there are no chips. The pilot hole size in the cutter is 5/16" The countersink is 1.25" diameter, is in good sharp used condition and looks to be about 60 degree included angle and it does say 60 on the side of it. The outside body diameter of the holder is 1.257"   Condition ............... Nice used We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing, and if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my Ebay store please do not send payment until I send you a total for combined shipping. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks!   I do not add my zip code to address below because they might change our zip code AGAIN, then I will have to change the zip code in every one of my Ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407   3 Mile rd. NW Grand Rapids, MI 616-791-9395              

Directions

Similar products from Adapters & Arbor Tool Holders

P.D.Q. Marlin Tool M-4-JC #4 Jacobs Taper Adapter Quick Change Tool Holder

P.D.Q. Marlin Tool M-4-JC #4 Jacobs Taper Adapter Quick Change Tool Holder

  • Middlebury, Indiana, United States
  • Jun 12th
P.D.Q. 702-22-007 1-1/4" M-Series End Mill Tool Holder Weldon Style 3" Proj.

P.D.Q. 702-22-007 1-1/4" M-Series End Mill Tool Holder Weldon Style 3" Proj.

  • Middlebury, Indiana, United States
  • Jun 12th
Smith Tool Quick Change Tap Adapter 51-005 !88C!

Smith Tool Quick Change Tap Adapter 51-005 !88C!

  • Saint Louis, Missouri, United States
  • Jun 12th
SPI 74-096-9 Shell End Mill Arbor, Quick Change, 3/4" Spigot System 200 |(59D)

SPI 74-096-9 Shell End Mill Arbor, Quick Change, 3/4" Spigot System 200 |(59D)

  • Saint Louis, Missouri, United States
  • Jun 12th
Jacobs No 2 Morse Taper Drill Chuck Adapter Arbor No 2 Jacobs Taper

Jacobs No 2 Morse Taper Drill Chuck Adapter Arbor No 2 Jacobs Taper

  • Kennedy, New York, United States
  • Jun 12th
Jacobs 1" Straight Shank to 3 JT Drill Chuck Adapter Arbor No 3 Jacobs Taper

Jacobs 1" Straight Shank to 3 JT Drill Chuck Adapter Arbor No 3 Jacobs Taper

  • Kennedy, New York, United States
  • Jun 12th
3"-8 NPT Tap,Taper Pipe Tap,solid M2 HSS, high speed steel,8 flt #NPT-3-new

3"-8 NPT Tap,Taper Pipe Tap,solid M2 HSS, high speed steel,8 flt #NPT-3-new

  • Madison Heights, Michigan, United States
  • Jun 12th
3-1/2"-8 NPT Tap,Taper Pipe Tap, M2 HSS, high speed steel,10 flt #NPT-3-1/2-new

3-1/2"-8 NPT Tap,Taper Pipe Tap, M2 HSS, high speed steel,10 flt #NPT-3-1/2-new

  • Madison Heights, Michigan, United States
  • Jun 12th
1-1/4"-11-1/2 NPT Tap,Taper Pipe Tap, M2 high speed steel,5 flt #NPT-1-14-new

1-1/4"-11-1/2 NPT Tap,Taper Pipe Tap, M2 high speed steel,5 flt #NPT-1-14-new

  • Madison Heights, Michigan, United States
  • Jun 12th
Erickson CAT40 TG75 Collet Chuck

Erickson CAT40 TG75 Collet Chuck

  • Johnson City, New York, United States
  • Jun 12th
Ingersoll CAT 40 1" Facemill Arbor 4" PRO 3035510 w/ 3" Facemill (LOC2145A)

Ingersoll CAT 40 1" Facemill Arbor 4" PRO 3035510 w/ 3" Facemill (LOC2145A)

  • Laingsburg, Michigan, United States
  • Jun 12th
CNC 1"Floating TapHolderCollet chuck uses 2E Procunier collets.Cap 1/16 to 1/2"

CNC 1"Floating TapHolderCollet chuck uses 2E Procunier collets.Cap 1/16 to 1/2"

  • Milwaukee, Wisconsin, United States
  • Jun 12th
HHIP 3900-1212 Mt2 Morse Taper End Mill Holder-Drawbar End, 1/4"

HHIP 3900-1212 Mt2 Morse Taper End Mill Holder-Drawbar End, 1/4"

  • USA, United States
  • Jun 12th
HHIP 3900-0144 Slotting Saw Arbor, R8 Shank, 5-3/32" Length

HHIP 3900-0144 Slotting Saw Arbor, R8 Shank, 5-3/32" Length

  • USA, United States
  • Jun 12th
APEX #2 Morse Taper .878" Quick Change Tap Holder

APEX #2 Morse Taper .878" Quick Change Tap Holder

  • Minneapolis, Minnesota, United States
  • Jun 12th
Modern Magic No. 3 Collet Tap Chuck for 1-1/8" Hand Tap adapter

Modern Magic No. 3 Collet Tap Chuck for 1-1/8" Hand Tap adapter

  • Minneapolis, Minnesota, United States
  • Jun 12th
Modern Magic No. 3 Collet Tap Chuck for 9/16" Hand Tap adapter

Modern Magic No. 3 Collet Tap Chuck for 9/16" Hand Tap adapter

  • Minneapolis, Minnesota, United States
  • Jun 12th
Eclipse Twist Lock QUICK CHANGE Tool Cutter Holder MT3 Morse taper

Eclipse Twist Lock QUICK CHANGE Tool Cutter Holder MT3 Morse taper

  • Minneapolis, Minnesota, United States
  • Jun 12th
SONNET HDA-50 COLLAR ADAPTER, 6 3/8" OD, 3 1/2" BORE, 4 1/2" WIDTH

SONNET HDA-50 COLLAR ADAPTER, 6 3/8" OD, 3 1/2" BORE, 4 1/2" WIDTH

  • Coffeyville, Kansas, United States
  • Jun 12th
LIGHTLY USED MORSE TAPER EXTENSION SOCKET MT4 SOCKET TO MT2 SHANK

LIGHTLY USED MORSE TAPER EXTENSION SOCKET MT4 SOCKET TO MT2 SHANK

  • Fairfield, Iowa, United States
  • Jun 12th

People who viewed this item also vieved

1/2" Turning / Boring Bar Right Hand - DPGB-21.51..Lathe, Gang Tool, Indexable

1/2" Turning / Boring Bar Right Hand - DPGB-21.51..Lathe, Gang Tool, Indexable

  • Eagle Point, Oregon, United States
  • Jan 30th
Kaiser TWN25 x CK2B Twin Cutter Boring Head 20 - 31 mm

Kaiser TWN25 x CK2B Twin Cutter Boring Head 20 - 31 mm

  • Millstone Township, New Jersey, United States
  • Jan 30th
Bahmuller SK40x1 1/4" End Mill Tool Holder SK40 Taper DIN 69871 1-1/4"

Bahmuller SK40x1 1/4" End Mill Tool Holder SK40 Taper DIN 69871 1-1/4"

  • Middlebury, Indiana, United States
  • Jan 30th
Bahmuller SK40x3/8" Tool Holder SK40 Taper 3/8" End Mill DIN 69871

Bahmuller SK40x3/8" Tool Holder SK40 Taper 3/8" End Mill DIN 69871

  • Middlebury, Indiana, United States
  • Jan 30th
LOT 3 NEW BROWNING ASSORTED Q1 1-3/4 Q1 2-1/4 BUSHING D265955

LOT 3 NEW BROWNING ASSORTED Q1 1-3/4 Q1 2-1/4 BUSHING D265955

  • Delta, Ohio, United States
  • Jan 30th
NEW TB WOODS JA-7/8 7/8 IN BUSHING B311512

NEW TB WOODS JA-7/8 7/8 IN BUSHING B311512

  • Buffalo, New York, United States
  • Jan 30th
SANDVIK VARILOCK CAT50 HOLDER A390.45-50 63 050M CAT 50 LOT C5557

SANDVIK VARILOCK CAT50 HOLDER A390.45-50 63 050M CAT 50 LOT C5557

  • Dayton, Ohio, United States
  • Jan 30th
SANDVIK VARILOCK CAT50 HOLDER A390.45-50 50 040M CAT 50 LOT C5518

SANDVIK VARILOCK CAT50 HOLDER A390.45-50 50 040M CAT 50 LOT C5518

  • Dayton, Ohio, United States
  • Jan 30th
Jacobs Chuck SM4G61 3/8" bore 24 TPI 1/16" to 3/8" capacity with mounting shaft

Jacobs Chuck SM4G61 3/8" bore 24 TPI 1/16" to 3/8" capacity with mounting shaft

  • Troy, Michigan, United States
  • Jan 30th
Rohm S2a 1/32-3/8 1/2-20 Machinist Drill Chuck W/ Gearbox

Rohm S2a 1/32-3/8 1/2-20 Machinist Drill Chuck W/ Gearbox

  • United States
  • Jan 30th
NEW KENNAMETAL INDEXABLE END MILL #285543R02

NEW KENNAMETAL INDEXABLE END MILL #285543R02

  • Wadley, Alabama, United States
  • Jan 30th
16MM INDEXABLE ENDMILL CUTTER & 10 PCS MITSUBISHI APMT 1135 CARBIDE INSERTS #B34

16MM INDEXABLE ENDMILL CUTTER & 10 PCS MITSUBISHI APMT 1135 CARBIDE INSERTS #B34

  • Hong Kong, Hong Kong
  • Jan 30th
K6-200CS SUNNEN HONE MANDREL WITH ADAPTER .200" - .205"

K6-200CS SUNNEN HONE MANDREL WITH ADAPTER .200" - .205"

  • Cleveland, Ohio, United States
  • Jan 30th
K6-230CH SUNNEN HONE MANDREL WITH ADAPTER .230" - .235"

K6-230CH SUNNEN HONE MANDREL WITH ADAPTER .230" - .235"

  • Cleveland, Ohio, United States
  • Jan 30th
2 new sandvik solid carbide 5/16" shank boring bar with insert.coolant thru

2 new sandvik solid carbide 5/16" shank boring bar with insert.coolant thru

  • Woburn, Massachusetts, United States
  • Jan 30th
5 solid carbide threading & grooving tools

5 solid carbide threading & grooving tools

  • Woburn, Massachusetts, United States
  • Jan 30th
Aloris DA-10 Knurling Facing Turning Holder

Aloris DA-10 Knurling Facing Turning Holder

  • Williamstown, New Jersey, United States
  • Jan 30th
Dorian QITP40 tool post set for 16-20" swing lathes (CA size), used on HAAS TL2

Dorian QITP40 tool post set for 16-20" swing lathes (CA size), used on HAAS TL2

  • College Station, Texas, United States
  • Jan 30th
400w 12000RPM Spindle Motor Mount 12V-48V Engraver Cutter Marker CNC

400w 12000RPM Spindle Motor Mount 12V-48V Engraver Cutter Marker CNC

  • Beijing, China
  • Jan 30th
Tapmatic N/C-R Reversible Tapping Attachment

Tapmatic N/C-R Reversible Tapping Attachment

  • Johnson City, New York, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies