5/8” OD flare (15/16-16 thread) x 3/4” MIP (tapped 1/2” FIP) MRU2-10-8 Safety+PLUS® Gas Appliance Excess Flow Valves The Inside Story on Automatic Gas Safety. Safety+PLUS® Excess Flow Valves (EFV) feature a patented excess flow technology designed to respond to gas line ruptures or disconnects at the appliance to help avert the potential for hazardous gas build-ups in the home.
SMOKE CANNON "VAROMOR" - for the effective treatment and prevention of bees by smoke fumigation! Saving considerable time at high rates! + GiFT - packing oxalic acid 20g!
The normally closed VG Series of modular single and double-body gas valves combined with SKP Series electro-hydraulic actuators provide safety shut-off, gas pressure regulation and air/gas ratio control for commercial and industrial gas burner. Features: Compact VGD20 double-valve bodies consist of two safety shut-off valves in series. The first (inlet) valve has a flat valve disc applicable for safety shut-off function only.
PRODUCT OVERVIEW Model # CSSL114R-36 X BrassCraft’s Safety+PLUS gas connector combines patented excess flow technology with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS Excess Flow Valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home.
Combination gas control for use in 24 Vac, gas-fired, intermittent pilot appliances with capacities from 30 to 415 cfh. Controls include safety shutoff, manual valve, two automatic operators, pressure regulator and pilot adjustment.
PNEUMATIC FRICTION WELDING BALER PNEUMATIC FRICTION WELDING BALER This tool is a kind of fusion packaging machine. The lapped thermoplastic packaging belt is fused by the heat produced by friction motion; hence, it is called "friction fusion". Principle is to use the binding tape winding product or package, then tighten and ends by heating mol
PNEUMATIC FRICTION WELDING BALER Handheld Pneumatic Strapper This tool is a kind of fusion packaging machine. The lapped thermoplastic packaging belt is fused by the heat produced by friction motion; hence, it is called "friction fusion". Principle is to use the binding tape winding product or package, then tighten and ends by heating molten or use the material such as bag buckles
Standard Features: TS SAFETY, MAGNET HEAD AND GAS CARRIER, K TYPE GAS IN/OUT 1/2" NPT, PILOT OUT (ONLY) 1/4" CCT CAN BE USED TO REPLACE FMEA PILOT OUT SAFETY GAS IN/OUT 1/2", PILOT OUT 1/4"CCT, BUT WILL NEED ADDITIONAL PARTS, SUCH AS, THERMOCOUPLE, PILOT, ADAPTORS. GARLAND MODEL? JADE MODEL?
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.