gauge panel for sale, brand-new and used.

.shippingcalculator a { display:block; width: 208px; padding:177px 0px 10px 0p

.shippingcalculator a { display:block; width: 208px; padding:177px 0px 10px 0p

Attractive, Vandal Resistant, Hot-Line Phone with Built-in Keypad and Enhanced Weather Protection The K-1900-8 panel phone can either auto-dial a phone number each time the handset is lifted, be used as a multi-number auto-dialer, or be used as a standard (dumb) phone. The unit will Touch Tone or pulse dial and will not auto-dial on incoming calls.

Monitor Mounts - Custom Monitor Mounts for use on Truss Trade Show Booths and Exhibits The perfect monitor mount for use on trade show truss with main cords that are 2" in diameter. These monitor mounts will easily and securely mount any size of flat panel monitor up to 220 pounds on your truss trade show exhibit or trade show booth in seconds. "No additional hardware required or modifications" Ready to use out of the box.

Quality products at affordable prices. Check out our

Wire Mesh Description

Greenlee 229 Electronic Connector Panel Punch, 9 Pin Punch unit includes punch, die, draw stud and nuts

var itemNumber = window.ebayItemID ?

THIS SALE IS FOR AN SPC TECHNOLOGY BRAND 50 PIN PANEL PUNCH WITH ALLEN KEYS (WRENCHES). THIS PUNCH WAS PROCURED FOR A VERY SMALL RUN OF PANELS, LESS THAN 45. IT IS IN EXCELLENT WORKING AND COSMETIC CONDITION.

This panel punch is for making holes in metal or plastic for 25-pin D-Subminiature connnectors (RS232). Front or rear panel mounting of connectors. Included: MK-25PS Panel Punch (25) AT-25 Adhesive backed templates (3) Hex Keys Instruction Manual Hole Size (roughly): .45" tall x 1.70 wide (conforms to 25-Pin D-Sub spec.) Material Thickness: 22(.025 inch) to 16(.051 inch) gauge steel and .125 inch maximum aluminum panel material Made in USA by Challenge Tool & Manufacturing Free shipping!

This panel punch is for making holes in metal or plastic for 50-pin D-Subminiature connnectors. Rear of panel mounting connectors only. Included: MK-50P Panel Punch (25) AT-50 Adhesive backed templates (3) Hex Keys Instruction Manual Hole Size (roughly): .54" tall x 2.16 wide (conforms to 50-Pin D-Sub spec.) Material Thickness: 22(.025 inch) to 16(.051 inch) gauge steel and .125 inch maximum aluminum panel material Made in the USA by Challenge Tool & Manufacturing Free shipping!

This panel punch is for making holes in metal or plastic for 14-pin Ribbon connnectors. Rear of panel mounting connectors only. Included: RB-14 Panel Punch (25) AT-14 Adhesive backed templates (3) Hex Keys Instruction Manual Hole Size (roughly): .65" tall x 1.16 wide (conforms to 14-Pin Ribbon spec.) Material Thickness: 22(.025 inch) to 16(.051 inch) gauge steel and .125 inch maximum aluminum panel material Made in the USA by Challenge Tool & Manufacturing Free shipping!

This panel punch is for making holes in metal or plastic for 24-pin Ribbon connnectors. Rear of panel mounting connectors only. Included: RB-24 Panel Punch (25) AT-24 Adhesive backed templates (3) Hex Keys Instruction Manual Hole Size (roughly): .65" tall x 1.59 wide (conforms to 24-Pin Ribbon spec.) Material Thickness: 22(.025 inch) to 16(.051 inch) gauge steel and .125 inch maximum aluminum panel material Made in USA by Challenge Tool & Manufacturing Free shipping!

This panel punch is for making holes in metal or plastic for 36-pin Ribbon connnectors. Rear of panel mounting connectors only. Included: RB-36 Panel Punch (25) AT-36 Adhesive backed templates (3) Hex Keys Instruction Manual Hole Size (roughly): .65" tall x 2.12 wide (conforms to 36-Pin Ribbon Centronics Standard spec.) Material Thickness: 22(.025 inch) to 16(.051 inch) gauge steel and .125 inch maximum aluminum panel material Made in USA by Challenge Tool & Manufacturing Free shipping!

This panel punch is for making holes in metal or plastic for 50-pin (SCSI Standard) Ribbon connnectors. Rear of panel mounting connectors only.

This panel punch is for making holes in metal or plastic for 3M Delta Ribbon connnectors (50 Contact). Rear of panel mounting connectors only. Included: MK-50-3M Panel Punch (25) AT-50-3M Adhesive backed templates (3) Hex Keys Instruction Manual Hole Size (roughly): .59" tall x 2.66 wide (for 3M Delta Ribbon connectors) Material Thickness: 22(.025 inch) to 16(.051 inch) gauge steel and .125 inch maximum aluminum panel material Made in USA by Challenge Tool & Manufacturing Free shipping!

This panel punch is for making holes in metal or plastic for 25-pin D-Subminiature connnectors (RS232). Rear of panel mounting connectors only. Included: MK-25P Panel Punch (25) AT-25 Adhesive backed templates (3) Hex Keys Instruction Manual Hole Size (roughly): .44" tall x 1.64 wide (conforms to 25-Pin D-Sub spec.) Material Thickness: 22(.025 inch) to 16(.051 inch) gauge steel and .125 inch maximum aluminum panel material Made in the USA by Challenge Tool & Manufacturing Free shipping!

This panel punch is for making holes in metal or plastic for 15-pin D-Subminiature connnectors. Rear of panel mounting connectors only. Included: MK-15P Panel Punch (25) AT-15 Adhesive backed templates (3) Hex Keys Instruction Manual Hole Size (roughly): .44" tall x 1.09 wide (conforms to 15-Pin D-Sub spec.) Material Thickness: 22(.025 inch) to 16(.051 inch) gauge steel and .125 inch maximum aluminum panel material Made in the USA by Challenge Tool & Manufacturing Free shipping!