I have Thousands of Manuals for Metal Working, Wood Working and Fabrication Machining. Please just ask if you are looking for a hard to find Manual. It would be a pleasure to get your Machine Up and Running Again through this Invaluable Information.
I have Thousands of Manuals for Metal Working, Wood Working and Fabrication Machining. Please just ask if you are looking for a hard to find Manual. It would be a pleasure to get your Machine Up and Running Again through this Invaluable Information.
Grease fitting used to lube the Spindle Pulley&Back Gear Shaft On 9,10&13" South Bend Lathes With 1/4x20 Threads This is a quality part machined from solid stock with Alemite Grease Fitting
Up for sale are 2 USED collars part number 9-33? and 9-78, which I purchased on Ebay thinking they were for an Atlas metal lathe with back gears. Clausing thinks they maybe for an older 9 inch metal lathe without back gears and the drawing they sent me tends to indicate these 2 collars COULD be 9-78 spindle gear spacer and 9-33 head spindle collar.
Up for sale is the USED rear spindle gear part number 9-100-32 which is off of the 9 inch lathe spindle which I purchased on Ebay thinking the parts were for an Atlas metal lathe with back gears. Clausing thinks it maybe for an older 9 inch metal lathe without back gears ,however I recognize this gear as being used on both my 10 f metal lathe and 12 inch commercial Atlas lathe. This gear is used but has no cracked or missing teeth and should be fully functional.
Grease Fitting used to lube the Spindle Pulley&Backgear Shaft On 9,10&13" South Bends With 1/4x20 Threads.These are machined from solid stock with Alemite fittings.
SOUTH BEND 9" / 10K METAL LATHE HEADSTOCK FLAT PULLEY & GEAR The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions!
ATLAS CRAFTSMAN 10 12 METAL LATHE HEADSTOCK SPINDLE DRIVE GEAR IF YOU NEED 2 PLEASE LET ME KNOW. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK, IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S.
Welcome to my site! Up for sale is an Original 24 Tooth Change Gear for a 6" Sears Roebuck Model #101.07301 Metal Lathe There is some information on the internet about this specific lathe model. I found the following information at the internet site: lathes.co.uk/atlas6inch/ "Styled to closely resemble its larger brother, the "10-inch", the Atlas 'Model 618' 6" x 18" (3.5" centre height) backgeared and screwcutting lathe was in production from 1936 until 1974 and then, in
South bend cone pulley/gear from a 9" model C. Should fit all of the 9/10k lathes. As you can see the pulley and gear are in good shape, it looks like this lathe saw little time in back gear.
Please ask questions before bidding and make sure the parts fit your application before bidding as many lathes look the same but have differences. You are bidding on the under spindle back gear shift handle assembly that goes to a 12 inch Atlas Metal lathe model number 3986 and other models. The parts are USED and in good condition.
Please ask questions before bidding and make sure the parts fit your application before bidding as many lathes look the same but have differences. You are bidding on the back gear shaft and eccentrics that go under the head spindle to a 12 inch Atlas Metal lathe model number 3986 and other models. The parts are USED and in VERY good condition.
This sale is for ONE GROUP of TWO previously owned COPIES (one each) of: 1) American Tool Works Company, THE NEW "AMERICAN" PACE MAKER LATHE DE LUXE, Bulletin No. 116), (Cincinnati 1958) 29 pages bound in a soft cover with an old dealer's stamp on the cover and minor wear along the edges.
In original manufacture packaging with plastic wrap. 0.01mm Graduation 1mm Revolution 2.5mm Range 0-50-0 Dial Reading Accuracy 10µm Measuring Force 1.4n or less The spindle and pinions are made od hardened steel for durability, while the rack gear is machine ground for a tighter fit and increased accuracy.
You are bidding on a New in the Box, Federal easy to read 1 3/4" Diameter Size .0005" Dial Indicator, Model #B5M. These indicators have a shockless, hardened steel gear train and jewel bearings Adjustable zero set Shockproof design range - .125" # Graduation (Decimal Inch): .0005" # Dial Reading: 0-15-0 # Diameter (Inch)
You are bidding on a Like New Federal easy to read 1 3/4" Diameter Size .001" perpendicular Dial Indicator, Model #V8I. These indicators have a shockless, hardened steel gear train and jewel bearings Adjustable zero set Shockproof design RANGE - .100" # Graduation (Decimal Inch): .001" # Dial Reading: 0-50-0 # Diameter (
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.