Georgia Oven MCV Hybrid High Temperature Vacuum Oven 18 cu. ft. 300°C, US $19,999.99 – Picture 0

Georgia Oven MCV Hybrid High Temperature Vacuum Oven 18 cu. ft. 300°C, US $19,999.99 – Picture 1

Georgia Oven MCV Hybrid High Temperature Vacuum Oven 18 cu. ft. 300°C, US $19,999.99 – Picture 2

Georgia Oven MCV Hybrid High Temperature Vacuum Oven 18 cu. ft. 300°C, US $19,999.99 – Picture 3

Georgia Oven Mcv Hybrid High Temperature Vacuum Oven 18 Cu. Ft. 300°c

US $19,999.99

Phoenix, Arizona, United States
Jan 30th

Open on mobile:
QR code

Georgia Oven MCV Hybrid Vacuum Oven Comes with a manual and what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from Intel & Georgia Oven and may vary slightly due to upgrades, options, or revisions this unit may or may not have. This was a custom made oven for Intel. I spoke with the engineering who was in charge of the tool and he said it ran great except the coupling from the motor will need to be replaced because there is a rusting issue due to moisture buildup. He said the cost of a re-engineering and replacing it would be around $8000.00 probably. The factory and the maker of the coupling are aware of the issue and he said he would be glad to assist in any way he could to get it rolling. It was used for R&D and bonding of wafers but it had to be removed because they needed the cleanroom space for more equipment. Licensing for the Watview software to run the temperature profiling would need to be purchased as well. The Engineer also said he never used the turbo pump on the unit or it has little use. List Price was: Approx. $117,000.00 from Georgia Oven. Description from Engineer: Event Driven, not Time Driven Oxygen Sensor Installed (but does not work, needs to be replaced). Varian Turbo-V 70-LP Turbo Pump has little or no use. Varian PTS-600 Scroll Pump. The LN2 trap is not installed but is with the unit. You only need it for high temperature but you have to have LN2 running all the time. Chamber Size: 18.5" W x 18.5" H x 18" D Temperature Range: Up to 250°C with water cooling, 300°C with LN2 Cooling & Trap installed. Time to Vacuum: Approx 1.5 to 2 mins for 750 Torr down to 50 mTorr (using only the Scroll Pump, According to the engineer) Vacuum Limit w/Heaters On: 150 Torr Ramp Time w/Small Load: 50°C/min. Ramp Time w/Large Load: 10°C/min For More Pictures Please Click the Following: Picture 2 - Chamber Picture 3 - Inside the Bottom Cabinet #1 Picture 4 - Inside the Bottom Cabinet #2 Picture 5 - Inside the Electrical Panel $500.00 minimum for packaging, handling, and order processing. Shipping to be determined by destination. Prior to shipment I need to know the following information: (1) Are you the end-user of this item? (2) If you are not the ultimate end-user of the item, please state the ultimate end user's name. (3) What is the ultimate country destination? For all international customers, the following terms and conditions shall apply: These commodities, technology, or software are to be exported from the United States in accordance with Export Administration Regulations. Diversion contrary to U.S. law is prohibited. Domestic customers must also agree to the following terms and conditions: For items shipped within the United States, MHz Electronics, Inc's performance shall occur entirely within the United States. Unless expressly agreed to by MHz Electronics, this shall not be a routed party transaction. If you have any questions please call Michael at 1-866-MHZ-ELEC (1-866-649-3532) Toll Free. Also, please click here to view or other auctions! 10/15/09 Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items. On Oct-31-13 at 21:11:45 PDT, seller added the following information: Click Here. Double your traffic. Get Vendio Gallery - Now FREE!

Condition

Used :

An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.

Seller Notes

“This was a custom made oven for Intel. I spoke with the engineering who was in charge of the tool and he said it ran great except the coupling from the motor will need to be replaced because there is a rusting issue due to moisture buildup. He said the cost of a re-engineering and replacing it would be around 8k probably. The factory and the maker of the coupling are aware of the issue and he said he would be glad to assist in any way he could to get it rolling. It was used for R&D and bonding of wafers but it had to be removed because they needed the cleanroom space for more equipment. Licensing for the Watview software to run the temperature profiling would need to be purchased as well. The Engineer also said he never used the turbo pump on the unit or it has little use.”