+ Post new Ad
Gison 90 Degree/Straight Edge Polishing Auxiliary Base A02, US $225.00 – Picture 0
Gison 90 Degree/Straight Edge Polishing Auxiliary Base A02, US $225.00 – Picture 0

Gison 90 Degree/straight Edge Polishing Auxiliary Base A02

US $225.00

  • Chesterfield, Missouri, United States
  • Jan 30th
Open on mobile:
QR code
Gison 90 Degree/Straight Edge Polishing Auxiliary Base Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application The Gison 90 degree edge polishing auxiliary base is used together with air polishers to accurately polish straight edges. This new product will remove the guess work and inconsistency that normally exists when fabricators polish stone edges with diamond polishing pads. It accepts maximum 3" back holder and 3" diamond polishing pads. Size of mounting hole is 2" (52mm). Specifications: Polishing Thickness: 10 ~ 40 mm Max. Pad Size : 3" (75 mm) Length : 190 mm Width : 154 mm Height : 134 mm Weight : 1.29 kgs (3 lbs) Diameter of mounting hole: 52mm (2") Compatable with Gison air polisher GPW-7. Wet Air Sander / Polisher Not Included Caution: Although the rollers for the base are made of nylon, it is possible that they may cause minor scratches on the surface of granite. To prevent that from occurring, we recommend that the polished surface be covered with masking tape before using this product.

Directions

Similar products from Project Plans

Sportster Frame Plans - Rigid - 250 Tire Size - Brand New - 36 x 72 Inches!

Sportster Frame Plans - Rigid - 250 Tire Size - Brand New - 36 x 72 Inches!

  • Novato, California, United States
  • Jan 30th
Springer Fork Plans - Springer Fork Blueprints - New - 36 x 72 Inches!

Springer Fork Plans - Springer Fork Blueprints - New - 36 x 72 Inches!

  • Novato, California, United States
  • Jan 30th
Element Dry Diamond Core Bit-1"

Element Dry Diamond Core Bit-1"

  • Ballwin, Missouri, United States
  • Jan 30th
Element Dry Diamond Core Bit-1-1/2"

Element Dry Diamond Core Bit-1-1/2"

  • Ballwin, Missouri, United States
  • Jan 30th
3/8 inch Radius Brazed Diamond Router Bit 1/2" Shank

3/8 inch Radius Brazed Diamond Router Bit 1/2" Shank

  • Chesterfield, Missouri, United States
  • Jan 30th
Replacement Diamond Finger Tip/Bit - Medium/Soft Granite

Replacement Diamond Finger Tip/Bit - Medium/Soft Granite

  • Ballwin, Missouri, United States
  • Jan 30th
1960 South Bend Machine Tool Catalog magazine pullout

1960 South Bend Machine Tool Catalog magazine pullout

  • Diamond Point, New York, United States
  • Jan 30th
Sawmill Plans to build a heavy duty band sawmill to cut wood for lumber

Sawmill Plans to build a heavy duty band sawmill to cut wood for lumber

  • Helotes, Texas, United States
  • Jan 30th
Hydraulic Motorcycle Lift Table - Plans

Hydraulic Motorcycle Lift Table - Plans

  • United States
  • Jan 30th
Finger Bit with 1/2" Gas Thread - For Hard Granite or Marble

Finger Bit with 1/2" Gas Thread - For Hard Granite or Marble

  • South El Monte, California, United States
  • Jan 30th
PowerHouse 4-Cycle Gas Engine Plans

PowerHouse 4-Cycle Gas Engine Plans

  • Hollansburg, Ohio, United States
  • Jan 30th
"1779" 24 Pounder Naval Cannon Plans

"1779" 24 Pounder Naval Cannon Plans

  • Hollansburg, Ohio, United States
  • Jan 30th
Roper Whitney Pexto 218 Bench Punch Pneumatic Conversion Plans on CD

Roper Whitney Pexto 218 Bench Punch Pneumatic Conversion Plans on CD

  • Atlantic, Iowa, United States
  • Jan 30th
Dremel Tool Router Stand How-To build PLANS Rotary Tool

Dremel Tool Router Stand How-To build PLANS Rotary Tool

  • Diamond Point, New York, United States
  • Jan 30th
Burring Tool for irregular curved work How-To Build PLANS

Burring Tool for irregular curved work How-To Build PLANS

  • Diamond Point, New York, United States
  • Jan 30th
Locating Faceplate How-To build PLANS 9" Metal Lathe

Locating Faceplate How-To build PLANS 9" Metal Lathe

  • Diamond Point, New York, United States
  • Jan 30th
Sheet Metal BENCH PUNCH How-To Build PLANS Deep Throat

Sheet Metal BENCH PUNCH How-To Build PLANS Deep Throat

  • Diamond Point, New York, United States
  • Jan 30th
1947 South Bend Machine Tool Catalog magazine section

1947 South Bend Machine Tool Catalog magazine section

  • Diamond Point, New York, United States
  • Jan 30th
4 way Tailstock TURRET TOOL POST How-To build PLANS

4 way Tailstock TURRET TOOL POST How-To build PLANS

  • Diamond Point, New York, United States
  • Jan 30th
Miser Low Temp. Stirling Cycle Engine Plans

Miser Low Temp. Stirling Cycle Engine Plans

  • Hollansburg, Ohio, United States
  • Jan 30th

People who viewed this item also vieved

HB/DC. 1949 Simplified Punch and Diemaking. James Walker / Carl C. Taylor

HB/DC. 1949 Simplified Punch and Diemaking. James Walker / Carl C. Taylor

  • Celina, Tennessee, United States
  • Jun 17th
Tree 2VG 2UVRC Operation & Maintenance Manual #2

Tree 2VG 2UVRC Operation & Maintenance Manual #2

  • Garden Grove, California, United States
  • Jun 17th
Federal Press Co. Service and Parts Manual for Models No. 0 to No. 8

Federal Press Co. Service and Parts Manual for Models No. 0 to No. 8

  • Graham, North Carolina, United States
  • Jun 18th
Tree 2VG Operation & Maintenance Manual #1

Tree 2VG Operation & Maintenance Manual #1

  • Garden Grove, California, United States
  • Jun 19th
Sharp VH3 Vertical & Horizontal Milling Machine Operation & Maintenance Manual

Sharp VH3 Vertical & Horizontal Milling Machine Operation & Maintenance Manual

  • Garden Grove, California, United States
  • Jun 19th
How To Make Tailstock Turret Head Attachment For Metal Lathe #387

How To Make Tailstock Turret Head Attachment For Metal Lathe #387

  • Port Alberni, British Columbia, Canada
  • May 31st
How To True-Up Worn Metal Lathe Chucks Accurate Work Machine Turning #376

How To True-Up Worn Metal Lathe Chucks Accurate Work Machine Turning #376

  • Port Alberni, British Columbia, Canada
  • May 31st
How To Make Build Chuck Jaw Extensions Increase Lathe Capacity #535

How To Make Build Chuck Jaw Extensions Increase Lathe Capacity #535

  • Port Alberni, British Columbia, Canada
  • May 31st
Make Steady Rest For Metal Lathe Turning Working Build Turn Article How To #357

Make Steady Rest For Metal Lathe Turning Working Build Turn Article How To #357

  • Port Alberni, British Columbia, Canada
  • May 31st
Make A Lathe Milling Fixture For Your Lathe Metal Turning Machining How To #18

Make A Lathe Milling Fixture For Your Lathe Metal Turning Machining How To #18

  • Port Alberni, British Columbia, Canada
  • May 31st
Emco Emcomat 7 & 7L & Maximat V10 Lathe Instruction & Parts List Manual *1249

Emco Emcomat 7 & 7L & Maximat V10 Lathe Instruction & Parts List Manual *1249

  • Goddard, Kansas, United States
  • Jun 1st
Emco Compact 5 Lathe Instruction & Service Parts List Manual *1143

Emco Compact 5 Lathe Instruction & Service Parts List Manual *1143

  • Goddard, Kansas, United States
  • Jun 1st
Powermatic 24" Planer Model 225 Operating Instructions and Parts Manual *1245

Powermatic 24" Planer Model 225 Operating Instructions and Parts Manual *1245

  • Goddard, Kansas, United States
  • Jun 1st
Powermatic 14" Band Saw Model PWBS-14CS Operating and Parts Manual *1273

Powermatic 14" Band Saw Model PWBS-14CS Operating and Parts Manual *1273

  • Goddard, Kansas, United States
  • Jun 1st
Powermatic 18" Vari-Speed Drill Press 2800 Late Model Operating and Parts Manual

Powermatic 18" Vari-Speed Drill Press 2800 Late Model Operating and Parts Manual

  • Goddard, Kansas, United States
  • Jun 1st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies