+ Post new Ad
Hydraulic Motorcycle Lift Table - Plans, US $20.00 – Picture 0
Hydraulic Motorcycle Lift Table - Plans, US $20.00 – Picture 1
Hydraulic Motorcycle Lift Table - Plans, US $20.00 – Picture 0
Hydraulic Motorcycle Lift Table - Plans, US $20.00 – Picture 1

Hydraulic Motorcycle Lift Table - Plans

US $20.00

  • United States
  • Jan 30th
Open on mobile:
QR code
These plans will guide you through the easy process of building your own hydraulic bike lift table. To build this lift, you will need materials and, most importantly, some metal working skills (welding and cutting etc...). The basic materials needed are a decent amount of hollow sections and a hydraulic unit. I constructed the motor lift myself, almost all from scrap metal, and these are the guided plans to build an identical one. The plans are detailed and structured in a step-by-step basis, so you can easily follow, with actual pictures included.  This bike lift will make maintenance work on your bike and washing it easier and is a must for anyone who has a love for motorbikes! Get your bike up off the floor to a comfortable height so you don't have to bend over or kneel on the floor! This will be a hydraulic lift so it rises with the use of a simple switch which will automatically stop at reaching maximum height.    You can watch a video on YouTube of the lift itself in action here:http://www.youtube.com/watch?v=_jqBsWK_pZM These plans will be sent to you by e-mail so you can easily print them. The plans are in PDF format so you will require Adobe Reader, however I am sure that the majority of people already have this program installed. It can also be downloaded for free from this link http://get.adobe.com/uk/reader/ © 2013 by Joe Cini.  All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of Joe Cini.   This is a set of plans only, no lift or motorcycle included! Will accept PayPal payments. Sent by e-mail Will usually send within 1-2 working days. No returns, all sales final. Thanks.  

Directions

Similar products from Project Plans

Sportster Frame Plans - Rigid - 200 Tire Size - Brand New - 36 x 72 Inches!

Sportster Frame Plans - Rigid - 200 Tire Size - Brand New - 36 x 72 Inches!

  • Novato, California, United States
  • Jan 30th
Sportster Frame Plans - SOFTAIL - 200 Tire Size - Brand New - 36 x 72 Inches!

Sportster Frame Plans - SOFTAIL - 200 Tire Size - Brand New - 36 x 72 Inches!

  • Novato, California, United States
  • Jan 30th
Sportster Frame Plans - Rigid - 250 Tire Size - Brand New - 36 x 72 Inches!

Sportster Frame Plans - Rigid - 250 Tire Size - Brand New - 36 x 72 Inches!

  • Novato, California, United States
  • Jan 30th
Springer Fork Plans - Springer Fork Blueprints - New - 36 x 72 Inches!

Springer Fork Plans - Springer Fork Blueprints - New - 36 x 72 Inches!

  • Novato, California, United States
  • Jan 30th
Element Dry Diamond Core Bit-1"

Element Dry Diamond Core Bit-1"

  • Ballwin, Missouri, United States
  • Jan 30th
Element Dry Diamond Core Bit-1-1/2"

Element Dry Diamond Core Bit-1-1/2"

  • Ballwin, Missouri, United States
  • Jan 30th
3/8 inch Radius Brazed Diamond Router Bit 1/2" Shank

3/8 inch Radius Brazed Diamond Router Bit 1/2" Shank

  • Chesterfield, Missouri, United States
  • Jan 30th
Replacement Diamond Finger Tip/Bit - Medium/Soft Granite

Replacement Diamond Finger Tip/Bit - Medium/Soft Granite

  • Ballwin, Missouri, United States
  • Jan 30th
1960 South Bend Machine Tool Catalog magazine pullout

1960 South Bend Machine Tool Catalog magazine pullout

  • Diamond Point, New York, United States
  • Jan 30th
Sawmill Plans to build a heavy duty band sawmill to cut wood for lumber

Sawmill Plans to build a heavy duty band sawmill to cut wood for lumber

  • Helotes, Texas, United States
  • Jan 30th
Finger Bit with 1/2" Gas Thread - For Hard Granite or Marble

Finger Bit with 1/2" Gas Thread - For Hard Granite or Marble

  • South El Monte, California, United States
  • Jan 30th
Gison 90 Degree/Straight Edge Polishing Auxiliary Base A02

Gison 90 Degree/Straight Edge Polishing Auxiliary Base A02

  • Chesterfield, Missouri, United States
  • Jan 30th
PowerHouse 4-Cycle Gas Engine Plans

PowerHouse 4-Cycle Gas Engine Plans

  • Hollansburg, Ohio, United States
  • Jan 30th
"1779" 24 Pounder Naval Cannon Plans

"1779" 24 Pounder Naval Cannon Plans

  • Hollansburg, Ohio, United States
  • Jan 30th
Roper Whitney Pexto 218 Bench Punch Pneumatic Conversion Plans on CD

Roper Whitney Pexto 218 Bench Punch Pneumatic Conversion Plans on CD

  • Atlantic, Iowa, United States
  • Jan 30th
Dremel Tool Router Stand How-To build PLANS Rotary Tool

Dremel Tool Router Stand How-To build PLANS Rotary Tool

  • Diamond Point, New York, United States
  • Jan 30th
Burring Tool for irregular curved work How-To Build PLANS

Burring Tool for irregular curved work How-To Build PLANS

  • Diamond Point, New York, United States
  • Jan 30th
Locating Faceplate How-To build PLANS 9" Metal Lathe

Locating Faceplate How-To build PLANS 9" Metal Lathe

  • Diamond Point, New York, United States
  • Jan 30th
Sheet Metal BENCH PUNCH How-To Build PLANS Deep Throat

Sheet Metal BENCH PUNCH How-To Build PLANS Deep Throat

  • Diamond Point, New York, United States
  • Jan 30th
1947 South Bend Machine Tool Catalog magazine section

1947 South Bend Machine Tool Catalog magazine section

  • Diamond Point, New York, United States
  • Jan 30th

People who viewed this item also vieved

ASM METALS HANDBOOK VOL 2 HEAT TREATING CLEANING FINISHING

ASM METALS HANDBOOK VOL 2 HEAT TREATING CLEANING FINISHING

  • Chesterton, Indiana, United States
  • Jun 15th
MACHINERY'S HANDBOOK 21st. EDITION 1980 EXCELLENT CONDITION

MACHINERY'S HANDBOOK 21st. EDITION 1980 EXCELLENT CONDITION

  • Rockford, Illinois, United States
  • Jun 15th
Machinery's Handbook student Edition 17th 1966 Machine Shop and Drafting

Machinery's Handbook student Edition 17th 1966 Machine Shop and Drafting

  • Rome, Ohio, United States
  • Jun 15th
Tree 2VG-C Operation & Maintenance Manual

Tree 2VG-C Operation & Maintenance Manual

  • Garden Grove, California, United States
  • Jun 16th
Tree 2UVR Operation & Maintenance Manuals

Tree 2UVR Operation & Maintenance Manuals

  • Garden Grove, California, United States
  • Jun 16th
Mitsubishi CNC meldas 50L/50G operation manual, BNP-B2086

Mitsubishi CNC meldas 50L/50G operation manual, BNP-B2086

  • Montebello, California, United States
  • May 31st
Bolt Nut & Rivet Standards, Industrial Fasteners Institute Cleveland OH 1952

Bolt Nut & Rivet Standards, Industrial Fasteners Institute Cleveland OH 1952

  • North East, Maryland, United States
  • May 31st
VNT 1945 Forming press Dies & their uses, Dies Handbook Book, Dreis & Krump MFG

VNT 1945 Forming press Dies & their uses, Dies Handbook Book, Dreis & Krump MFG

  • North East, Maryland, United States
  • May 31st
Forming Press Dies & Their Uses, For all Press Brakes Book Dreis & Krump MFG1950

Forming Press Dies & Their Uses, For all Press Brakes Book Dreis & Krump MFG1950

  • North East, Maryland, United States
  • May 31st
Hercules 1540 Samco SL 1540 metal lathe operations parts manual

Hercules 1540 Samco SL 1540 metal lathe operations parts manual

  • Milford, Nebraska, United States
  • May 31st
BRAND NEW Dremel 116 1/8" High Speed Cutter Use On Wood, Plastics, & Soft Metal

BRAND NEW Dremel 116 1/8" High Speed Cutter Use On Wood, Plastics, & Soft Metal

  • Bay City, Michigan, United States
  • May 31st
BRAND NEW Dremel 953 1/8" Grinding Stone

BRAND NEW Dremel 953 1/8" Grinding Stone

  • Bay City, Michigan, United States
  • May 31st
BRAND NEW Dremel 125 1/8" High Speed Cutter Use On Wood, Plastics, & Soft Metal

BRAND NEW Dremel 125 1/8" High Speed Cutter Use On Wood, Plastics, & Soft Metal

  • Bay City, Michigan, United States
  • May 31st
BRAND NEW Dremel 114 1/8" High Speed Cutter Use On Wood, Plastics, & Soft Metal

BRAND NEW Dremel 114 1/8" High Speed Cutter Use On Wood, Plastics, & Soft Metal

  • Bay City, Michigan, United States
  • May 31st
BRAND NEW Dremel 194 1/8" High Speed Cutter Use On Wood, Plastics, & Soft Metal

BRAND NEW Dremel 194 1/8" High Speed Cutter Use On Wood, Plastics, & Soft Metal

  • Bay City, Michigan, United States
  • May 31st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies