grease nipple for sale, brand-new and used.

Thanks for looking at my auction. Up for bid is the following item: A grease nipple for Ryobi / Itek press!! This item comes from a smoke-free home.

Autoparts Wholesalers - Official eBay Store

YOU ARE BUYING NIPPLE IS AS SHOWN IN THE PHOTO, 1/4" BODY X 1/4"-18NPTF MALE THREADS MODEL H2C, STEEL . 20 Series Couplers Accepts Industrial Interchange Nipples Manual sleeve, single shut off 20 Series Pneumatic Couplers mate with Industrial Interchange nipples, the standard male tip of the pneumatic industry. Available options include Sleeve-Lok, stainless steel locking balls and springs, and grip-ring sleeve.

YOU ARE BUYING NIPPLE IS AS SHOWN IN THE PHOTO, 1/2" BODY X 1/2"-14NPTF MALE THREADS MODEL H2F, STEEL . 20 Series Couplers Accepts Industrial Interchange Nipples Manual sleeve, single shut off 20 Series Pneumatic Couplers mate with Industrial Interchange nipples, the standard male tip of the pneumatic industry. Available options include Sleeve-Lok, stainless steel locking balls and springs, and grip-ring sleeve.

Thanks for looking at my auction. Up for bid is the following item: AB Dick parts for Ryobi / Itek press!! These parts have never been used are are still inside the plastic packaging.

Jiffy threaded 'grease tite' adapter QSA2- used - with 1/2 pipe nipple attached h-1 1/8 p - 1/2

Heidelberg uses a smaller grease gun with a pointed transfer point for lubricating the impression cylinder gearing. This one is much larger with a typical female transfer point or nipple.

ABN SAE Hydraulic Grease Zerk Nipple Fitting Straight & 90/45 Degrees Angled 110 Pieces Kit Product Features

THK HSR15A2SS Linear Guide Made in Japan-Assembled in USA This is a New, Unused Rail and Linear Guide in an Unopened Factory Package. The Item Contains 2 rails of 340mm length and 4 blocks that are 24mm high 47mm wide and 56.6mm long with Grease Nipple.

Here's a new Samson electronic metered gun unit for multi fluids. This comes with hose, gun,meter,valve and nipple. This is what Walmart uses.

Note: 6 each are the 90 degree right angle and one each is a 45 degree angle.

3/8-20 BSF 90 Degree Angle Grease Zerk Fitting Nipple 3/8-20 BSF, 90 Degree Angle Steel Zinc Clear, BS 84 Check: Surface Ball

M6 x 0.75 Taper Thread Straight Grease Zerk Fitting Nipple M6 x 0.75 Taper Thread Straight Steel, Zinc Clear, DIN 71412 Check: Surface Ball