grease pipe for sale, brand-new and used.

T Rex Pro

1.5KW 110V WATER-COOLED MOTOR SPINDLE AND MATCHING INVERTER +80mm CLAMP+COOLED WATER PUMP SET

For more information about our pumps and filters, call 1-605-881-3473. This is our 10 Micron Cleanable Filter System which features a cleanable 10 micron stainless steel filter element, dual pressure gauges, heavy duty mounting bracket, and 1" Hose Barbs. 10 Micron is a good size for filtering oil when a stainless steel element is used.

super nice bender. note the 5/8 bender is complete. to use the 7/8 bender you will need to swap the center pivot pin (intended to be removable and pulls out by hand to release the tube after it is formed) and swap the drive handle/pinion with the other one, which also just pulls out with no tools.

This vintage 1/4 tom arbor press , was dad's from many years ago . I chose "seller refurbished" , as I completely dis-assembled , greased , re-assembled , & tested and it works fantastic ! The original handle had long been gone , I replaced it with just a steel pipe that fits good at one end , but in no way does this interfere with the presses operation !

Very good conditionsmall turning by the peck stow Wilcox Co. Plantsville CTeverything turns smoothly, base is 8 1/2" tall turning wheels are 2" crank is 7" long I put a coat of paint on it to protect it, because i cleaned all the grease off of itwill come some what disassembled as i am going to try to fit it all in a large flat rate boxT

VERY NICE USED GREENLEE 777 BENDER FRAME, DIES AND PINS, IN CASE . NO HYDRAULICS. OTHER SETS USE THE SAME RAM AND PUMP, AVOID DUPLICATION BY GETTING JUST THE SET PICTURED HERE.015-04-01-116-1 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect

Rotator nozzle - 1" hose fit, 2.5' diameter, 3.75' length, Vortex rotator for spin and angled cleaning Interior/exterior thread-in replaceable set screw jet/water jet Socket-headed (white ceramic) inserts 7 Jets/orifice total, nozzle orifice sizes are: 3 rear jets = 7/64 fit 2 on body = 5/64 fit 2 other body = 3/32

Rotator nozzle, 2.5" diameter, 3.75" length Vortex rotator for spin and angled cleaning Interior/exterior thread-in replaceable set screw jet/water jet 7 thrust jets - socket-headed inserts (white ceramic) Jet orifice approx. 1/16" Advanced Work Horses 1503 Thrust/Cleaning Jets Crown cleaning, finish, cleaning and grease

3040 4 Axis Cnc Router Engraver Professional Routers Cutting Machine 0.8KW VFDSKU: FC3040A+TS005

OUR PROJECT WAS CANCELLED NEW SLURRY PUMP (Horizontal Shaft) Weir – Wemco Extra Heavy Duty Vortex Slurry Pump Recessed Impel