Great 3s 1400-2200mw Dental Curing Light Led Cure Lamp Curing Light Wireless Azq

US $48.23

Nanning, China
Aug 31st

Open on mobile:
QR code

Description: Name: Dental LED Curing Equipment Battery (rechargeable use): Lithium ion battery Battery capacity: 1600mAh Battery voltage: 3.7V Weight: about 400g with packaging Applicable temperature/humidity: 5°C~40°C/80% Packing specification: 300x150x60 mm Curing time:3s,5s,10s,15s,20s Charger input voltage: 100V-240VAC, 50-60HZ Output voltage: host dc 5v/1A LED light wavelength: 458.5nm Atmospheric pressure: 50kPa106kPa Light Intensity P1 Highlight Mode 1800-2200mw/cm2 P2 Standard Model 1000-1300mw/cm2 Note: The time required for resin curing mainly depends on the resin brand, curing depth and area, etc., 3 seconds is a reference value, not an absolute value, respectfully. Operation method: 1 Lightly press the "M" mode setting button of the main unit, you can select any of the following two modes to enter the working state: (1) P1 high light intensity mode: 1800-2200mw/cm2 (2) P2 standard mode: 1000-1300mw/cm2 After selection, the display shows the corresponding characters (P1/P2). 2 Tap the "T" time setting button of the host to set the light curing time: (1) P1 mode can choose 3 or 5 seconds timing time (2) P2 mode can choose the timing time of 10, 15, 20 seconds 3. When in use, put the disposable film cover on the head of the main unit, then aim the light source at the position to be cured, press the "" on/off key, the main unit will emit a beep, the main unit will emit blue light and press the selected Working in working mode, the display screen starts to display the countdown time from the selected timing time, and ends at 0 o'clock, and the display screen returns to display the original set timing time. 4. During the work process, you can press the " on/off "to end the work at any time, and the display will return to the original set timing time. 5. After one irradiation cycle is over, you can immediately press the "on/off" key to start the next cycle. If it is obvious that the handle starts to get hot, stop working until the handle is completely cooled down before starting to work. In P2 mode, it is recommended that the continuous irradiation time does not exceed 120S. 6. Low-voltage indication: The host has a low-battery detection function. When a low battery is detected, the display flashes. Please charge it in time. 7. Connect the power adapter (optional) to the 100V-240V network power when charging, and insert the output end of the adapter into the charging port at the bottom of the host, and the display scrolls. 8. After use, please remove the disposable film cover from the head of the main unit and throw it into the trash can. Repeated use is prohibited. If the lens is stained with resin, please wipe it clean with cotton cloth to avoid affecting the light intensity. 9. The machine will automatically shut down after 2 minutes of inactivity, please press any key to turn it on. Use and safety precautions: 1. When using the machine for the first time, please charge it for at least 4 hours. The display scrolls when the battery is charging, and the display stops scrolling when it is fully charged. At this time, you can pull out the plug of the power adapter. Long-term charging is prohibited. 2. When in use, a disposable film cover should be inserted and repeated use is prohibited to prevent cross-infection. 3. In clinical use, the light source should be directly irradiated on the cured resin material to prevent improper irradiation position and affect the curing effect. 4. The original shading plate must be used to effectively prevent blue light from damaging the eyes. Blue light is strictly forbidden to irradiate the eyes. 5. Please use the original power adapter, other power adapters may cause damage to the lithium battery and control circuit. Features for Dental LED Curing Lamp 1. Wireless 2. USB 3. TWO working models: P1 Highlight Mode,P2 Standard Model 4. Time setting: P1:3, 5, P2:10, 15, 20s 5. Large capacity battery, A full charge can be used for more than 500times Including: Host*1 Shading sheet*1 Date line*1 No charging stand FDA Statement : The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Payment All eBay approved payments , it is easy and safe. Payment should be sent within 7 (SEVEN) days of auction closing. All winning bidders whom won our item, please let me know your contact number after you made the full payment , we need this number to make sure you can receive your item in time, and also for emergency contact consideration. Shipping The item will be dispatched within 3days after payment received in full and cleared. Please make sure your address match the paypal address before you pay.Other countries, please contact us to check the extra shipping cost. Thank you! Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check your country's customs office to determine what these additional costs will be prior to bidding/buying. Returns Returns could be accepted within 30 days after receipt of the item. Terms of Sale: Refund or replacement request is available only the requests within 1 week after parcel received & returning the item as the same condition as received. Please contact us to request a return authorization. Your name, auction number, and reason for return should be included in the email. All items returned must contain all original packaging materials.Please repack the item carefully. Items returned will be tested and a new replacement will be shipped to the buyer immediately when found defective. In the event that a suitable replacement is not available then a refund will be issued. Shipping, handling and insurance fees are non refundable. If the item is found non-defective, the item will be sent back to the buyer at buyer's expense. Items returned without RMA number will be refused and returned to the sender. Buyer is responsible for All Return Postage and Shipping Charges. Buyer is responsible for additional shipping costs for items that are returned refused and / or undeliverable. We do not accept any returns without an authorization number on the box or label it is being returned. Feedback: IMPORTANT INFORMATION ON OUR POLICY AND FEEDBACK Please leave me FIVE STAR POSITIVE feedback if you are satisfied with our items. We try to be fair and accurate with all of our product listings and descriptions. Please read each auction, bid, and sale carefully. We will appreciate it if you please email us before leaving negative feedback. If there is a problem, we can work together to resolve it. We strive to always be extremely fair and always try to work with reasonable customers. Negative feedback doesn't go away and should only be left as a last resort! We strive for positive feedback, harmonious relations and even friendships. We will always make every attempt possible to resolve issues if we made a mistake.(It happens). Please do not assume a mistake is intentional. Let us know if our service could be better!! Contact us We will reply all messages within 24 business hours and we are able to give you a quick response during the duty time. If we are off duty, please kindly be patient and give us a little more time, not just leave the neutral or negative feedback without communication. Every problem will be solved ASAP if you contact us!

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Unbranded
MPN	Does Not Apply
Light Type	LED
Country/Region of Manufacture	China
Featured Refinements	Dental LED Curing Light
Intended Use/Discipline	Dental Laboratory, Dentistry, Endocrinology, Endodontics