Dental Led Curing Light Lamp Wireless Cordless Resin Cure Dentist Cure Lamp

US $52.55

Beijing, China
Sep 1st

Open on mobile:
QR code

Safety: 1. The xlite Curing Light must be used in strict accordance with the following operating instructions. Discus Dental accepts no liability for any damage resulting from the use of this unit for any other purpose . 2. Prior to start-up of Xlite curing light make sure that the operating voltage started on the rating plate is compatible with the available mains voltage . Operation of the unit at a different voltage may damage the unit. 3. Exposure must be restricted to the area of the oral cavity in which clinical treatment is intended. 4. Use only chargers and adapters supplied by Shenghua Industry. The use of third part chargers and/or power adapter may result in damage to the unit and my be hazardous to users/patients. 5. Do not allow cleaning agents to directly enter the unit as this may cause premature failure . See maintenance and care. 6. Do not use on patients with a history of photo biological conditions including urticarial solaris or erythropoetic protoporphyria or who are on photosensitizing medications. 7. Suitable blue-light filtering safety goggles must be worn by patient and dentist during use. Curing Mode Guide Mode Fast mode Ramping mode Light intensity 1300mW/cm 100 to 1300mW/cm Times 15 sec 20 sec Curing Mode Swith Press and hold the switch one sec, light curing unit emit a short beep. And then release. This can be converted from one mode to another mode. Mode Fast mode Ramging Indicator Blue LED steady Blue LED flashing Charge Status Status Low battery Full Charging Indicator Green LED steady Green LED off Green LED flashing Packing List: a. Power adapter b. Curing light unit c. Charger base d. Instruction manual ST1: Feature: - 5W power light - 2 color lights: blue light for solidify resin material, white light is diagnostic function - Four working models: strong power, low power, flashing, gradually strong - Solidify time: 5s-40s select - Wireless, low battery alert, battery can be recharged - full charging to work for 10 seconds each time can be used continuously for more than 300 times - Brand new model match light meter Technology data: Working voltage: 100-240V 50-60Hz Wavelength: 420-480 nm Light power: more than 1500mw/cm2 Capability of battery: 2200mA/h3.7 V It can solidify 2-3mm deepness in a few seconds Packing list: 1 Main unit*1 2 Charging base*1 3 AC adaptor*1 4 Light shade*1 5 Light guide* 1 ST2: Feature: 1. Built-in light meter function 2 Wireless Inductive charging, longer life span 3 Four models to choose (STRONG LOW FLASHING GRADUALLY STRONG) 4 The handle covered by ANS painting 5 Can be used continuously more than 500times Technology data: Blue-ray illumination: 5W1200Mw/CM2 Capability of battery: 2200mA/h 3.7V Input Voltage: AC 110-240V 50-60Hz Wavelength: 420-480nm Light power: 1200-2000mw/cm2 Solidify depth: 5s/3mm Time select: 5, 10,15,20,25,30,35,40 seconds Battery standby time: 90 days Packing list: Main unit*1 Charging base*1 AC adaptor*1 Light shade*1 Light guide*1 Whiten tip *1 D8: Feature This product is used in fast solidification by lighting dental resin. It is a new generation of standard developed LED curing light, with humanity intelligent chip, World advanced high intensity LED light and Li-on rechargeable battery. It can cure all the dental resin in the market nowadays Its performance is further surpassing the halogen curing light's, which can solidify 4-5mm deepness in 8 seconds. Technical parameters Power voltage: AC100-240V 50-60Hz L.E.D Ortho light- super light intensity: 2000mw/cm2 Light guide for fast and powerful curing exposure times for optimal curing: 8s/ 6s/ 4s You can select the right time for the different types of material you wish to cure. Packing list 1. Curing light 2. High capacitance rechargeable battery 3. Charger 4. Operation manual 3S: Technical Parameters: Light Source: Broad Band LED; Wavelength Range: 385 - 515 nm; Light Intensity: > 2300mW / cm; Battery: Lithium-ion battery (total running time when the battery is fully charged: at least 80 minutes); Power Adapter Input Power: AC 100-240V 50 / 60Hz; Charging time: about 45 minutes; Size:Handle: 20 mm 240 mm; Charging stand: 63 mm 30 mm (all of the above are the largest size)

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	EAN	Non applicable
Light source	Broad spectral LED
510(K) Number For Dental Handpiece	K181691
Operating Temperature	+10- +35 +50- +70
510(K) Number For Curing Light	K192233
Operating environment pressure	700hpa-1060hpa
510(K) Number For Scaler	K163414
Handpiece Dimensions	max25.5mm220mm
FDA 510(k)	K192233
Total rentime with fully charged battery	30 min
FDA 510(k)#	K192233
Time to charge Discharged Battery	Max 5 hours
Relative humidity	30%~75%
Input Voltage	100-240VAC,50-60HZ
Fast Curing	1 Second / 1S
Weight	Handpiece 93G Charger base 190g
Input Power	10VA
Charger base	65mm23mm
Color	Purple / White
Battery	Lithium-ion battery
Dimensions	25mm240mm
Operating relative humidity	30% --- 75%
Wave length	450nm-455nm
Wavelength range	385-515 nm
Power supply	rechargeable Lithium battery
Output Voltage	5vdc/1a
Battery voltage and capacity	3.7V/1400mAh
Non-Domestic Product	No
rotatable head	360 degree
Modified Item	No
Power Output	DC5V/1A
Country/Region of Manufacture	China
Optional working mode	standard and strong
Custom Bundle	No
Light intensity	High Power
Featured Refinements	Dental LED Curing Light
Net weight	278g
Light Type	LED
Optional working time	1s, 3s, 5s, 10s, 15s, 20s
Intended Use/Discipline	Dental Laboratory, Dentistry
Battery mode	JW-Y-1.4
Brand	Unbranded
Power Input	100V to 240V, 50Hz/60Hz
MPN	Does Not Apply