Grips & Tongs (Workholding Tools) for sale, page 28

Vintage newborn hand vise 3-1/2" vise anvil

Camp Hill, Pennsylvania, United States
Jun 17th

Vintage Newborn Hand Vise 3-1/2" Vise Anvil. EXCELLENT CONDITION. THE STEEL JAW PLATES WERE REMOVED AND REPLACED WITH HARD OAK IN ORDER TO USE FOR WOOD WORKING.

Vintage stanley c-601 - 4 s - machinist drill press vise old usa tools

Vinton, Iowa, United States
Jun 17th

Fresh from the FARM Thank you for your interest in Farm Girl Treasures. We will be offering over 100 items per week of great rural America barn finds that are fresh from the farm. So if you are a collector of the vintage, antique, primitive, shabby chic, rusty and crusty that has been found on

Wilton 5" jaws 4 1/4 opening usa made swivel combo vise

Buffalo, New York, United States
Jun 17th

The auction is for a Wilton swivel vise. This vise has 5 inch jaws. Opens to 4 1/4 inches.

Ridgid bc-410 bench chain pipe vise 1/8"- 4" capacity

New Britain, Connecticut, United States
Jun 17th

RIDGID , Model BC-410 , Bench Chain Pipe Vise , 1/8"-4" Capacity , used , good overall condition.

Ridgid model 22 bench pipe vise

New Britain, Connecticut, United States
Jun 17th

RIDGID , Model 22 , Bench Pipe Vise , used , good overall condition.

Vertex 3900-2168 prisma vise jaw for 4"

US, United States
Jun 17th

VERTEX 3900-2168 Pri

Hhip 3900-2104 pro-series angle tight positive lock milling vise with swive...

US, United States
Jun 17th

HHIP 3900-2104 Pro-S

Swivel head pin vise general tools combination wrench 92 038728410627

Tehachapi, California, United States
Jun 17th

Rothenberger 1/8"-4" bench yoke pipe vise 70711

Denham Springs, Louisiana, United States
Jun 17th

Just getting rid of some equipment that's not getting used. It's in perfect working condition, and it was never even mounted. The teeth are perfect like the day it was made.

Machinist enco 8" milling vise for bridgeport mill or others 425-7580

DeKalb, Illinois, United States
Jun 17th

Machinist Enco 8" Milling Vise for Bridgeport Mill or others 425-7580 weight 135 lbs plus pallet will need to ship truck freight or buyer may pickup In Dekalb Il 60115, questions Scott cell 8150-260-7629

Wilton vise 1644 4" jaw

South Lyon, Michigan, United States
Jun 17th

Wilton Vise 1644 4" jaw fully functional, some rust, hacksaw marks on jaw please see pictures

Excellent delta rockwell usa scg100 univise tilt & swivel grinding vise #m3a2.2

Perth, Ontario, Canada
Jun 17th

This sale is for one Excellent DELTA Milwaukee USA SCG100 UNIVISE Item #M3A2.2 This item is in excellent condition, like new with some very minor marks please see photographs for additional detail.Could use a light polishing with a metal polish like Autosol or similar to make the machined surfaces shine....extra fine steel wool would also do th etrick to make this unit look as new! A beautiful and very useful tool for grinding , light milling and drilling work.

Brand new lock bolt & nut for swivel base from a craftsman 4" bench vise #51854

Dacula, Georgia, United States
Jun 15th

This is a brand new lock bolt and nut for a swivel base from a Craftsman 4" vise. Thread diameter is approximately 3/8". Please email any questions you might have before bidding.

Brand new jaw face set from a craftsman 4" bench vise - #51854

Dacula, Georgia, United States
Jun 15th

Winning the auction requires a response from the bidder/buyer within 3 calendar days following the end of the auction, to avoid the item going to the next highest bidder/buyer. Craftsman 4" Bench Vise - #51854 - New Jaw Faces and Screws Set This new product is a set of jaw faces and screws designed for use with a Craftsman 4" bench vise. If you have any inquiries about this item, please do not hesitate to ask before placing a bid, as this item is sold without returns.

Brand new swivel base from craftsman 4" bench vise - #51854

Dacula, Georgia, United States
Jun 15th

This is a brand new swivel base from a Craftsman 4" vise. Approximate measurements: Overall 4 7/8" x 5 5/8". 1 5/16" high.

Palmgren drill press vise 2 1/2" wide jaws 6" long

Carpentersville, Illinois, United States
Jun 15th

>> VERY GOOD CONDITION >> NO CHIPS , REPAIRS OR CRACKS >> ALL WORKING >> ALL ORIGINAL >> SMOKE & PET FREE HOME >> PLEASE MAKE SURE TO > SEE PICTURES FOR SIZE & CONDITION BEFORE PURCHASING >> ANY QUESTIONS PLEASE CONTACT ME .. Payment is expected within three (3) days of auction close unless prior approval is received before bidding.

Hhip 3900-2123 steel mill vise stop for 5" and 6" vises

United States, United States
Jun 15th

HHIP 3900-2123 Steel Mill Vise Stop for 5" and 6" Vises >> Vises Product Features Fits 5 & 6" milling

Kurt d60 anglock 6" precision vise **in box**

Troy, New York, United States
Jun 15th

KURT ANGLOCK PRECISION VISEMODEL: D60 6" Precision KURT AngLock Vise **With Original Boxes** Includes KURT Vise Handle If You Have Any Questions, Please Feel Free To Contact Levon At 518-951-9110.Thank You.

Panavise 308 weighted vise mount w/adjustable base & circuit board holder

Aurora, Illinois, United States
Jun 15th

Thanks for looking! Up for bid here is a Panavise #308 w/adjustable circuit board holder. Used by in good condition!

Kurt d60 anglock 6" machine vise with handle *in box*

Troy, New York, United States
Jun 15th

KURT Machine Workholding AngLock ViseMODEL: D60 Each Unit Includes:(1) 6" KURT Precision Vise With (1) KURT Vise Handle & Box If You Have Any Questions, Please Feel Free To Contact Levon At 518-951-9110.Thank You. Ships From Troy, NY 12