Grips & Tongs (Workholding Tools) for sale, page 10

Machinist drill press vise 5" jaw machine tooling holder tools needs 6 bolts!

Shrewsbury, Massachusetts, United States
Oct 28th

*****BUY IT NOW PRICES DROP DAILY. WATCH ANY ITEMS YOU MAY BE INTERESTED IN. SHIPPING AND PRICE DISCOUNTS ON MULTIPLE ITEMS AND ORDERS.

K.k.k 8.5" x 10" precision machinist vise bridgeport vertical mill swivel base

Johnson City, New York, United States
Oct 28th

Prentiss no. 94 bulldog vise 5" jaw inserts - great condition

Mendon, Massachusetts, United States
Oct 28th

PRENTISS No. 94 Bulldog Vise 5" Jaw Inserts - show normal signs of use, great condition.

Suburban tool 4 inch precision vise

Brooks, Georgia, United States
Oct 28th

This works great

Work bench vise jaws sold in pair width 5" brass bronze tool holding holder

Lapeer, Michigan, United States
Oct 28th

THIS IS TWO BRASS PARTS THAT LOOK LIKE THEY MAY BE FOR A VISE BUT IF NOT THEY SURE COULD BE,THEY ARE 5" LONG, 1-1/2" HIGH, 3/4"THICK AND JUST UNDER 1/2" WHERE MACHINED,3/8 HOLES ARE 3" CENTER TO CENTER,SOLD AS IS

Mini vise aluminum bench swivel clamp on bench miniature vises jewelers hobby

China, China
Oct 28th

Dunlap pipe vise bench yoke vice no. 00-h,1/8 - 1-1/4 pipe capacity made in usa

Boston, Massachusetts, United States
Oct 27th

DUNLAP No.00-H Pipe Vise Bench Yoke Vice,1/8 To 1-1/4 Pipe Capacity. Vise is in great working order, Pipe grips in great shape. Great vice for use, decor, re-purpose or restoration.

Vintage palmgren 515-3 tilting machinists vise

Massapequa, New York, United States
Oct 27th

This old vise is in used working condition and needs a good cleaning. A great addition to your collection or shop. Many of our items are second hand and are described to the best of our abilities to ensure you receive the product you expect. We sc

Vintage 2 inch wilton bullet shaped vise, chicago

Jansen, Nebraska, United States
Oct 27th

This is a great little vise, it shows signs of wear and use, the jaws have some minor damage from use, please look at the pictures. There is paint loss, minor pitting and nicks. I have lubricated it lightly and it appears to work well.

Simplex 41p vise

Plainfield, Indiana, United States
Oct 27th

I have a Simplex 41p vise great shape purchased from a storage. The vise is in good working condition .

New heinrich da-4401 air pneumatic 4" bench vise double-acting cylinder 15x

Edmonds, Washington, United States
Oct 27th

DA-4401 ViseComplete with No. 45-12CI Foot Treadle and three No. 34-14 5 ft.

Wilton vintage bench vise tilting swivel 4" 121079 made u.s.a

San Pablo, California, United States
Oct 27th

In very good condition. This weighs 17 pounds. I can't offer free shipping.

Record no. 5 bench vise swivel mount 5" jaws 6-3/4" opening 3-1/4" throat

Middlebury, Indiana, United States
Oct 27th

Zona 37-200 mini vise, jaw width 1-3/8-inch, jaw capacity 1-1/4-inch, zinc

US, United States
Oct 27th

Wavy parallel set - 1/2" to 1 1/2" - 9 pair

Baltimore, Maryland, United States
Oct 26th

used in original wood casewavy parallel set - 1/2" to 1 1/2"

Vintage wilton cadet vise w/ 5" jaws & swwivel base

Hellertown, Pennsylvania, United States
Oct 26th

Kurt sidewinder™ vise - for 8" vise new made in usa

Warren, Michigan, United States
Oct 26th

Mounts vertically to back of any Kurt 6" or 8" vise with an integral bracket Bracket includes a stabilzation leg For 2nd op work holding part vertically rather then horizontally Does not interfere with host vise Pull type vise

6'' milling drilling machine bench clamping vice

Morristown, Tennessee, United States
Oct 26th

THIS IS A 6'' MILLING DRILLING MACHINE BENCH CLAMPING VICE. IT IS USED AN THERE IS SOME WEAR ON THE VICE PLEASE LOOK AT PICTURES

Machinist/tool maker high quality precision vise 3.5x1.5x1.5

Hadley, Pennsylvania, United States
Oct 26th

used but in good condition has some wear marks but oiled well and free of grime and rust

Kurt 3-in-one system jaw plates for 6" vises new

Warren, Michigan, United States
Oct 26th

KURT 3-In-One System Jaw Plates For 6" Vises NEW 3-in-1 System Jaw PlateIdeal for quick setups of common angle cutsPreset patterns in jaws provide for these 7 popular angles: 5°, 10°, 15°, 20°, 25°, 30°, 45°Tolerance between holes 0.0004" (0.01mm)Jaw dimensions: 6" x 1.735" x 0.725" & 8" x 2.20" x 1.075" ±0.000787" (±0.02mm)Pins sets included are:- 4 ea. 6 x 22mm- 3 ea. 6 x 58mm- 3 ea.