grit grinder for sale, brand-new and used.

2014 New 4" inch Diamond coated grinding grind disc wheel glass For Angle Grinder hot sales !!New 1 piece of 100mm 4" diamond coated grinding disc / wheel. The size is 100mm outside diameter, the hole in the middle is 16mm diameter,

Two Foredom #30 chuck type hand pieces One unknown Foredom model # slim collet type hand piece.The 1/8" collet inside this thin one has one of the tabs missing so the collet needs to be replaced for it to tighten properly. Virtually new belt sander attachment AK797210 with # 30 hand piece attached. Comes with 9 new 100 grit belts and a used belt on the unit.

MILWAUKEE MODEL No. 5211, 3" STRAIGHT GRINDER MILWAUKEE MODEL No. 5211 STRAIGHT GRINDER.IN-LINE TYPE.120V AC-DC, 11.0A MOTOR.SINGLE SPEED 14500 RPM.TRIGGER ON/OFF SWITCH WITH LOCK-ON BUTTON.3-WIRE POWER CORD.TOOL REST PADS.TEXTURED FRONT GRIP.3/8" - 24 SPINDLE.CLAMP ON WHEEL GUARD WITH HINGED FACE PLATE.COMES WITH GOOD USED INSTALLED MILWAUKEE 49-92-0500, 36 GRIT, 3" x 1/2" WHEEL.ALSO INCLUDES WHEEL WRENCHES AND SCREEN PRINT OF OWNER'S MANUAL.NO KIT BOX

I have listed a Werkmaster Titan. It was purchased new in 2012. It runs off of single or three phase 208 power.

Unused military surplus. Four 3M mandrels. 1 /4 shank for use in die grinder see package photo.

I am told these wheels outlast the original Mac Tools wheels by a factor of 2 to 1. Box of 100 (4 stacks of 25) Grinding Wheels 2" x 11/64" x 3/8" ( 50 mm x 4.5 mm x 10mm ) These are "depressed center" aka "type 27" grinding wheels. They are reinforced with fibre mesh for increased safety A60 grit (Aluminum Oxide Abrasive Material) An excellent wheel both in terms of value and quality Several local fabrication / welding shops and garages are using these very same wheels with&n

Cat no. 49_92_0250. 2 1/2" X 1/2" x3/8" hole.

Brand SK11 Package size L:105xW:105xH:2mm?@Weight:40g 1pcs Size(mm):Outer dia(mm) 105?Thickness 2.3?Hole dia(mm) 15 #:36 Hardness:M Grit:gC Max speed:80M/S For:100mm Disc grinder Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

FREE SHIP (United States) The rubber backer is 5/8"-11 Thread.

Package of 10 Features One step finishing solution to reduce cost Quiet, vibration-free grinding Raised hub fits all standard grinder back flanges With integral thread 5/8"-11 ECO-TRIM backing for increased life and flexibility. Safe and easy to trim Materials Steel, stainless steel

These discs are new in their original packaging.

The 3M™ Full Tapered Cartridge Roll 341D has a tapered tip that allows grinding and finishing in tight spaces, corners, and crevices. As the outermost abrasive layer of the taper wears down, the cloth backing frays to expose fresh abrasive layers of mineral for continued cutting action. The aluminum oxide cartridge attaches to a steel threaded cartridge roll mandrel (sold separately) for use with a hand-held die grinder or rotary drill.