gun feeder for sale, brand-new and used.

Miller® S-74S Single Wire Feeder Package With Promax® Q400 MIG gun and 15ft leads includes extended 50 ft ' 14-pin interconnecting cord and 0.035"/0.045 drive roll. Automatic run-in control significantly improves arc starts and can be independently set on the DX model. Trigger hold permits operator to make long welds without having to hold the trigger continuously and minimizes operator fatigue.

This is a Miller X-Treme 12VS Feeder with the self shielded gun.  The feeder does have the gas solenoid valve installed.  It is ready for you to hook up to your feeder.

MILLER DIMENSION 400 w/ S-64 WIRE FEEDER MIG & STICK WELDING WELDER BOOM SETUP With 400A of CC/CV output at 100% Duty Cycle, the Dimension 400 w/ S-64 Welding package can handle any MIG, STICK, or Flux-Cored welding job you throw at it! --Miller Dimension 400 CC/CV Welding Power Supply--Miller S-64 Welding Wire Feeder w/ Drive Rolls --NEW MIG Gun--Ground Cable and Clamp--Interconnect Cables--NEW Flowmeter and Hose--Bernard Boom and Welding Cart Fea

Lincoln Electric Push/Pull Feeder with 15 ft Cobramatic Gun air cooled. This is a 42 volt feeder to run off any Lincoln power supply with a 14 pin 42 volt power supply. This is a great way to weld Aluminum and is a true push/pull system.

Hilti SF 4500 Drywall Screw Gun w/ SMI 55 Plus Automatic Screw Feeder Use as standard gun or with feeder for fast installations  Tool is in new condition.  This is amazing tool saves lots of time, awesome for ceilings or 2 story rooms

Used Lincoln STT-II invertec surface tension transfer process.  Includes LN-742 feeder, Bernard gun 20', regulator, and ground cable all in decent used condition. The welder welds fine at all amperages. 

Used Thermal Arc Ultrafeed 1000 Wire Feeder. The Ultrafeed 1000 is a semiautomatic, solid state controlled wire feeder capable of 100% duty cycle. The system offers both load and line voltage compensation helping to maintain a constant wire feed speed even with changes in the input voltage and/or load.

Sell a nice setup here for doing production aluminum mig welding. also comes with a new Miller 22A wire feed unit with two tweeco guns, and over $1200 in spare parts tips, liners, gear drives, cups, diffusers, power blocks, and so on and so on. Retail on the package is over $13,000.

New Thermal Arc Porta-Feed 17A Wire Feeder. This model has been used as a demo a couple of times, but it has not been used otherwise. The Porta-Feed is a semiautomatic, variac controlled wire feeder capable of a 100% duty cycle.

New Porta-Feed 17 Wire Feeder. The Porta-Feed 17 Wire Feeder is a totally enclosed feeder including the wire spool mounted in a plastic case. The wire feed motor is a permanent magnetic type which is variac controlled.

Call 404-736-6494 with any questions.

Tregaskiss Water Cooled Robotic Mig Gun You are bidding on a new Tregaskiss 600 amp, 6 foot Water Cooled Robotic MIG gun. Part #RW16CZ0GA1GM. This gun has a 100% duty cycle rating at 600 amps when used with CO2 .

Lincoln K3269-1 Magnum PRO 100SG Aluminum Welding Spool Gun Top FeaturesPremium Magnum® PRO expendables - Copper Plus™ contact tips and long-life diffusers with Anti-Seize™ threads.Lightweight at only 3.5 lbs. (1.6 kg).For all aluminum alloys - Recommended wire diameters can be fed with the same drive roll and liner assembly.Ergonomic grip - and balanced design.Precise Feeding Performance for Soft Aluminum Wire.The Magnum® PRO 100SG spool gun is

You are bidding on a new in the box. Spool gun. This come with free shipping in the 48 US states.

Tweco® 400 Amp Professional No. 4 Classic Air Cooled MIG Gun For 0.035" - 0.045" Wire With 15' Leads And Miller® Style Connector You are looking at a brand NEW item, only opened the box to take the pictures! Enter the part number in bing or google and you will see all the information you need, and see pricing higher then you see here.

For auction is a brand new never connected Tweco 400 amp air cooled Mig Gun with Miller direct connect rear end for connection to your Miller wire feeder or Miller Mig machine. Tweco Mig Guns are arguably the most popular mig guns ever made, replacement or spare parts can be found everywhere including welding supply stores and thousands of on-line sellers. Features

Description Of Item:

MILLER CP-302 MIG WELDER w/ S-64 WIRE FEEDER MIG FCAW WELDING PACKAGE Perfect for your medium to heavy duty MIG and FCAW needs! Guaranteed in EXCELLENT working condition. Full MIG setup includes: Miller CP-302 CV Welding Power Source Miller S-64 4-Roll Welding Wire Feeder NEW 400 Amp MIG Gun Ground Cable and Clamp Interconnect Cable NEW Flowmeter and Hose 4 Drive Rolls (.045") Wheeled Running Gear with Cylinder Rack Features: