hammer in rivets for sale, brand-new and used.

This is a new, unused bag of 1,000 plastic anchor rivets from Micro Plastics Inc., with a mushroom style head. They measure .25 inches by 1.5 inches and are a very pale gray in color. (The rivet section is 1 1/2 inches, that is how deep the hole it is being put into has to be.

This is the Flexco Alligator Heavy Duty Plate Fastener for 14" and smaller belts WILL REPAIR BELTS 4" TO 14" ARJ14 Similar to the JD Heavy Plate Fastener, using one large rivet instead of 2 small rivets Uses the straight JD pin Use the portable Flexco Alligator Splice Tool ART14 in my store to install (no vice needed) (Much more economical than the JD tool) Pull the belt part-way out o

This is the Flexco Alligator Heavy Duty Plate Fastener for 7" and smaller belts WILL REPAIR BELTS 4" TO 7" ARJ7/175 Similar to the JD Heavy Plate Fastener, using one large rivet instead of 2 small rivets Uses the straight JD pin Use the portable Flexco Alligator Splice Tool ART7 in my store to install (no vice needed) (Much more economical than the JD tool) Pull the belt part-way out o

CK HAMMER Designed for professionals CK Ball-pein hammer T4208H 08 8 ounce / 1/2 lb. (227 gr.) Drop forged high carbon steel head Hardened & tempered for s

Brand New and Factory Sealed, unopened Starrett Drive Pin Punch Set 8 Pieces Hardened tempered steel knurled grip rivet round Features:

This auction is for a new Slide Sledge Heavy Equipment Hammer curved chisel tip. May have some nicks and scratches but has not been used. This is the last one I have.

Item Details Proto 1312PGD By Stanley Ball Pein Hammer 12 oz Ball Pein Hammer, Head Weight 12 oz, Overall Length 12 1/16 In, Handle Material Jacketed Fiberglass, Rim Tempered Face, Hammer Weight 1.31 lb, Head Material Drop Forged Steel B

Aircraft Riveting, Parts 1 and 2, prepared by the International Textbook Co., Scranton, PA, for the Bureau of Aeronautics, Navy Department, Washington, D.C., 1944. 5 1/2 x 8 1/2 softcover, 46 pages (Part 1) and 37 pages (Part 2). Reprinted in 2004 by Nation Builder Books, Leesburg, VA.

Product Description Product Description Magnetic Wristband Keeps Tools Within Your Wrists Reach -- Are you tired of that metallic taste leftover from holding nails in your mouth while you prepare to use them in your home repairs? -- Are your friends and family tired of holding a jar of screws and fasteners for you while you work at the top

This sale is for one new Air impact hammer Pneumatic made by HDX works at 90 psi and comes with 1 punch chisel and a flat scraper chisel also. Items paid before 4pm C.S.T. will ship out the same day Priority Mail at no additional cost.

Made of oil tanned cowhide leather 4 pockets inside 6 pockets outside One metal hammer loop Fits a three inch belt Reinforced with rivets and sewi

Right pouch 7 pockets One metal hammer holder Fits a three inch belt Left pouch Three pockets 

Geffen - Best deals on eBay NEW Starrett 248C Extended Length Drive Pin Punch 8" Overall Length 3-1/2" Pin Length 1/4" Pin Diameter

Work perfect, was used at evergreen aircraft shop. used by A & P mec. so works great top of the line air hammer, used to put in rivets in aircraft brand is ATS

Be sure to check out all our other high quality tool auctions too... Up for sale here is a G10 Atlas Copco RRH08P-TS Recoiless 4X Air Hammer Pneumatic Rivet Gun Aircraft Tool in used condition.This is a used aircraft tool does have wear from used and tested strong does have o