Hangers & Connectors (Building Supplies) for sale, page 69

Bud industries jb-3956 steel nema 1 sheet metal junction box with lift-off sc...

US, United States
May 29th

BUD Industries JB-3956 Steel NEMA 1 Sheet Metal Junction Box with Lift-off Screw Cover, 6" Width x 8" Height x 4" Depth, Gray Finish This heavy duty steel junction box is well suited for a variety of junction and pull box electrical applications. Heavy duty 16 ga welded steel construction. Screwed on flat cover with key holes for easy assembly.

Toggler toggle ta hollow-door anchor with screws polypropylene made in us 1/8...

US, United States
May 29th

TOGGLER Toggle TA Hollow-Door Anchor with Screws, Polypropylene, Made in US, 1/8" to 1/4" Grip Range, For #8 to #12 Fastener Sizes (Pack of 5) The TOGGLER Toggle TA hollow-door anchor provides a firm hold in 1/8"- to 1/4"-thick hollow-core doors and thin panels, includes 8 x 1-1/4" screws, and is made in USA. The anchor is made from polypropylene that resists corrosion, is nonconductive for anchoring electrical components, and is low-friction to facilitate screw installation.

Simpson/strong tie - ccq96sds2.5, column cap w/sds screws, gray, new

Meadville, Missouri, United States
May 29th

SIMPSON/STRONG TIE - CCQ96SDS2.5, COLUMN CAP W/SDS SCREWS, GRAY, NEW New, unused, no original manufacturers packaging. This product has never been put into service Items ship via USPS within 48 hours of payment. Items are shipped with great care to insure customer satisfaction.

22 speed rail fittings 1 1/2"

West Salem, Ohio, United States
May 29th

Here is a lot of 22 speed rail fittings. There are 6 couplers, 12 cross and 4 corners. They were a couple times on 1 1/2" pvc pipe.

Toggler snaptoggle wall anchor with bb 1/4"-20" - 4 pk heavy duty deep wing

USA, United States
May 29th

Simpson strong stud plate

Crestview, Florida, United States
May 29th

Simpson strong Stud plate . New never used. Have over 50 but this sale is for 10.

Hilti x-w6-20-27-fb8. nail,fasteners.

Boyertown, Pennsylvania, United States
May 29th

I'm not exactly sure what these are for but there are 90 + of them. Typical Hilti quality. Check pictures, feel free to ask any questions.

Pop rivets all stainless steel 1/4 x 6.25 usa made qty 400

Portage, Michigan, United States
May 29th

new

Caddy clips (34) h-ti/t rod to flange clip 4ti24

Hialeah, Florida, United States
May 29th

This listing is for a total of 46 Caddy clips type 4TI24. These are for 1/4" threaded rod. Part Number 4TI24

Caddy clips (100) sealed box cable/conduit clip 1/2 in. conduit k8

Hialeah, Florida, United States
May 29th

This listing is for a new box containing 100 Caddy clips type K8. These are for 1/2" conduit to rod or wire. Part Number K8

Ramset .27 caliber 3rs27 green loads 100 loads per box (12 available) + extra?

Hialeah, Florida, United States
May 29th

This listing is for ONE box of Ramset 3RS27 .27 cal green strips. 10 shots per strip, 10 strips per box. EXTRA GIFT?

Caddy clips (46) thread install rod hanger with angle bracket 6tb

Hialeah, Florida, United States
May 29th

This listing is for a total of 46 Caddy clips type 6TB. These have plain holes, with no thread. Can work with 1/4 in.

E-z lok threaded insert zinc hex-flanged 3/8"-16 internal threads 25mm length...

US, United States
May 29th

E-Z Lok Threaded Insert, Zinc, Hex-Flanged, 3/8"-16 Internal Threads, 25mm Length (Pack of 25) E-Z LOK Hex Drive inserts for soft wood are an inexpensive insert for use in ready-to-assemble furniture, drawer pulls, or wherever the avoidance of thread stripping is desired. Ideal for use in materials such as pine, plywood, composition board, and MDF, Hex Drive inserts feature tapered external threads which resist pull out caused by vibration.

1/4-20 x 1/2" polypropylene flanged hex bolt

Abingdon, Maryland, United States
May 28th

New!! 1/4-20 X 1/2" Long Polypropylene Flanged Hex Bolts. Material is non-magnetic, corrosion resistant, has medium temperature resistance, and is one of the least expensive polymers.

10-24 x 1 1/2" pvdf slotted flat head screws, craftech part number k121

Abingdon, Maryland, United States
May 28th

(k)New!! 10-24 X 1 1/2" PVDF ( Polyvinylidene ) Slotted Flat Head Screws. Craftech Part Number K121.

6-32 x 1/2" pvdf slotted pan head screws

Abingdon, Maryland, United States
May 28th

(k)New!! 6-32 X 1/2" PVDF ( Polyvinylidene ) Slotted Pan Head Screws. The material is nonmagnetic, has a temperatur range of -148 degrees F to 302 degrees F, has good strength, weather ability, creep resistant, and will not support combustion.

Spotnail-series 80- 3/8" (1/2" crown) galvanized upholstery staples 10,000/box

Fontana, California, United States
May 28th

Secure Fastening Systems, Inc. Fontana, CA. 92336 Since 1988 #80- 3/8" Upholstery 80 Series Galvanized Staples

1/4-20 x 3 1/4 wedge anchor stainless steel with nuts and washers 50 pieces each

California, Missouri, United States
May 28th

You are bidding on 50 pieces of a 1/4-20 x 3 1/4 stainless steel wedge anchor which is new. The anchors also have the flat washers and nuts included. Please pay within 3 days of the end of the auction.

1-3/4" 16 gauge angled finish nails for paslode & dewalt 2000/box

Fontana, California, United States
May 28th

Secure Fastening Systems, Inc. Fontana, CA. Since 1988 PAYPAL * VISA * MASTER CARD * DISCOVER * AMERICAN EXPRESS

Lot of 26 - mitek - mt20 - 5" x 8" truss plates - new old stock

Saint Marys, Pennsylvania, United States
May 28th

Up for sale is a lot of (26) 5" X 8" MiTek truss plates. They are made of 20 gauge, A-653 grade 40, structural steel that is hot dipped galvanized. There are 8 teeth/square inch.