+ Post new Ad
Hardinge -C25-D 8 7/8" Fixture Plate NEW OLD STOCK !!!!, US $175.00 – Picture 0
Hardinge -C25-D 8 7/8" Fixture Plate NEW OLD STOCK !!!!, US $175.00 – Picture 1
Hardinge -C25-D 8 7/8" Fixture Plate NEW OLD STOCK !!!!, US $175.00 – Picture 2
Hardinge -C25-D 8 7/8" Fixture Plate NEW OLD STOCK !!!!, US $175.00 – Picture 3
Hardinge -C25-D 8 7/8" Fixture Plate NEW OLD STOCK !!!!, US $175.00 – Picture 0
Hardinge -C25-D 8 7/8" Fixture Plate NEW OLD STOCK !!!!, US $175.00 – Picture 1
Hardinge -C25-D 8 7/8" Fixture Plate NEW OLD STOCK !!!!, US $175.00 – Picture 2
Hardinge -C25-D 8 7/8" Fixture Plate NEW OLD STOCK !!!!, US $175.00 – Picture 3

Hardinge -c25-d 8 7/8" Fixture Plate New Old Stock !!!!

US $175.00

  • Anaheim, California, United States
  • Jan 30th
Open on mobile:
QR code
Hardinge C25-D Fixture Plate Threaded Mount 8 7/8" This plate has never used, it is old inventory. Note: New Cost from Hardinge is $250.00 LOOKING FOR BRIDGEPORT PARTS? IS YOUR MACHINE NOISY? NEED A PART? NEED A REBUILD? NEED A REPAIR? JUST NEED SOME ADVISE? CALL DAN'S MACHINE TOOL, INC. WITH ANY QUESTIONS...(714) 666 - 1266. WE SELL MOST BRIDGEPORT MILL PARTS (VARI SPEED & STEP PULLEY): CLOCK/QUILL SPRINGS, HANDLES, BELTS, BEARINGS, KNOBS, HANDWHEELS, SWITCHES, HUBS, PULLEYS, WIPERS, NUTS, BOLTS, DRAWBARS, REPAIR KITS: 1 1/2HP, 2 HP STEP PULLEY AND OR VARI SPEED. IF YOU NEED A HARD TO FIND PART CALL DAN'S MACHINE TOOL, INC. OVER 30 YRS OF REPAIR AND REBUILDING EXPERIENCE ON ALL METAL WORKING MACHINERY INCLUDING BUT NOT LIMITED TO: ACRA, BRIDGEPORT, CINCINNATI, HARDINGE, LAGUN, LE BLOND, KENT, SCOTCHMAN DAN'S MACHINE TOOL, INC. SPECIALIZES IN REPAIR & REBUILD, NEW & USED TOOLING, SALES OF NEW AND PREOWNED MACHINES, MANY IN STOCK: MILLS, LATHES, GRINDERS, BANDSAWS, IRONWORKERS. ALL UNDER POWER.
Condition:
New other (see details): A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer Hardinge

Directions

Similar products from Fittings & Plates

Machinist Set-up Block Tool, 90 Degree Angle

Machinist Set-up Block Tool, 90 Degree Angle

  • New Lenox, Illinois, United States
  • Feb 13th
MACHINIST TOOLS LATHE MILL Large Lot of Lathe Dog s for Hold Down s

MACHINIST TOOLS LATHE MILL Large Lot of Lathe Dog s for Hold Down s

  • Morris Plains, New Jersey, United States
  • Feb 13th
Interstate 7" x 10" Tilting Table - Excellent Condition!

Interstate 7" x 10" Tilting Table - Excellent Condition!

  • Bellingham, Washington, United States
  • Feb 13th
10" SINE BAR Hardened & ground V. GOOD CONDITION

10" SINE BAR Hardened & ground V. GOOD CONDITION

  • Bristol, Connecticut, United States
  • Feb 13th
HEAVY DUTY 10" x 15" TILTING MILLING TABLE

HEAVY DUTY 10" x 15" TILTING MILLING TABLE

  • La Puente, California, United States
  • Feb 13th
6 inch sine bar used

6 inch sine bar used

  • Old Saybrook, Connecticut, United States
  • Jan 30th
7 1/2" Face plate - 1 1/2" X 8 TPI

7 1/2" Face plate - 1 1/2" X 8 TPI

  • Liberty, Texas, United States
  • Jan 30th
milling tools / fixture

milling tools / fixture

  • Boise, Idaho, United States
  • Jan 30th
Used ROTADEX " ALL TOOL " 5c Collet by Eastern Machine and Tool USA

Used ROTADEX " ALL TOOL " 5c Collet by Eastern Machine and Tool USA

  • Cherokee, Iowa, United States
  • Jan 30th
HARDINGE MODEL C24-D BACK PLATE FIXTURE THREADED MOUNT

HARDINGE MODEL C24-D BACK PLATE FIXTURE THREADED MOUNT

  • Anaheim, California, United States
  • Jan 30th
(5) Machinist Angle Block s, Plate, All are 3" - 5" Tall x 2" - 4" Wide, Hardene

(5) Machinist Angle Block s, Plate, All are 3" - 5" Tall x 2" - 4" Wide, Hardene

  • Saint Clair, Michigan, United States
  • Jan 30th
Suburban Tool indexing face plate fixture, v block, WG1- 6 machinist tool

Suburban Tool indexing face plate fixture, v block, WG1- 6 machinist tool

  • North Street, Michigan, United States
  • Jan 30th
Vintage Cincinnati Tool Co No. 540 4” C Clamp INV9991

Vintage Cincinnati Tool Co No. 540 4” C Clamp INV9991

  • Laurel, Maryland, United States
  • Jan 30th
TSUDAKOMA MODEL RNCB-501R INDEXER AND DRIVE SYSTEM (TABLE DIA. 19.69")

TSUDAKOMA MODEL RNCB-501R INDEXER AND DRIVE SYSTEM (TABLE DIA. 19.69")

  • Fort Worth, Texas, United States
  • Jan 30th
SANKYO OILLESS MWP 100-150 WEAR PLATE - 2PCS - NEW - FREE SHIPPING!

SANKYO OILLESS MWP 100-150 WEAR PLATE - 2PCS - NEW - FREE SHIPPING!

  • Otisville, Michigan, United States
  • Jan 30th
SANKYO OILLESS MWP 48-125 WEAR PLATE - 2PCS - NEW - FREE SHIPPING!

SANKYO OILLESS MWP 48-125 WEAR PLATE - 2PCS - NEW - FREE SHIPPING!

  • Otisville, Michigan, United States
  • Jan 30th
Aluminum Machinist Collet Fixture Plate Table 9 x 8 x 1" Thick, 2 x 1/2" Holes

Aluminum Machinist Collet Fixture Plate Table 9 x 8 x 1" Thick, 2 x 1/2" Holes

  • Cornell, Illinois, United States
  • Jan 30th
Brown & Sharpe Index Head

Brown & Sharpe Index Head

  • Ashland, Ohio, United States
  • Jan 30th
High clamping forces Janetech S + J due to conical sleeves BK4/60/72

High clamping forces Janetech S + J due to conical sleeves BK4/60/72

  • Ashdod, Israel
  • Jan 30th
Palmgren 8" Rotary Table w/ 4 Jaw Chuck

Palmgren 8" Rotary Table w/ 4 Jaw Chuck

  • Ashland, Ohio, United States
  • Jan 30th

People who viewed this item also vieved

Hardened & Precision Ground Collets NEW ER-40 SET 24 pc

Hardened & Precision Ground Collets NEW ER-40 SET 24 pc

  • Columbus, Ohio, United States
  • Feb 18th
Hardinge 5C Collet Lot

Hardinge 5C Collet Lot

  • Gaithersburg, Maryland, United States
  • Feb 18th
South Bend 9/10k Lathe Collet Rack Original

South Bend 9/10k Lathe Collet Rack Original

  • Creston, Ohio, United States
  • Feb 18th
1- Drop Forged Steel Wilton # 3 Bridge Clamp USA Made 3" Opening Looks Unused

1- Drop Forged Steel Wilton # 3 Bridge Clamp USA Made 3" Opening Looks Unused

  • Loris, South Carolina, United States
  • Feb 27th
Starrett 161-D parallel Clamps 2 pieces

Starrett 161-D parallel Clamps 2 pieces

  • Maumee, Ohio, United States
  • Feb 27th
Genuine Crosby 1-1/8" diameter Cable Wire Rope U Clamp Clamping 3/4 bolt threads

Genuine Crosby 1-1/8" diameter Cable Wire Rope U Clamp Clamping 3/4 bolt threads

  • Grand Rapids, Michigan, United States
  • Feb 27th
Used Hartford Tool Steel Live Center No. 4 with Morse Taper #4, Approx. 7.25 In

Used Hartford Tool Steel Live Center No. 4 with Morse Taper #4, Approx. 7.25 In

  • Bristol, Connecticut, United States
  • Feb 28th
Used The Ready Tool Steel Live Center with Morse Taper #2, 7-3/4" Length

Used The Ready Tool Steel Live Center with Morse Taper #2, 7-3/4" Length

  • Bristol, Connecticut, United States
  • Feb 28th
The Ready Tool 6-1/2" Length Steel Live Center with MT #2 and Custom Head, G-20

The Ready Tool 6-1/2" Length Steel Live Center with MT #2 and Custom Head, G-20

  • Bristol, Connecticut, United States
  • Feb 28th
VINTAGE Cardinal GREENE 4 B Speed Vise

VINTAGE Cardinal GREENE 4 B Speed Vise

  • Nixa, Missouri, United States
  • Feb 28th
L & W DIVIDING HEAD & 6" VISE MILL BRIDGEPORT KEARNEY TRECKER CINCINNATI B&S ETC

L & W DIVIDING HEAD & 6" VISE MILL BRIDGEPORT KEARNEY TRECKER CINCINNATI B&S ETC

  • Hillsborough, New Jersey, United States
  • Feb 28th
KURT TYPE VISE HANDLE 3/4"

KURT TYPE VISE HANDLE 3/4"

  • Hillsborough, New Jersey, United States
  • Feb 28th
USED MACHINED CAST IRON CHUCK ADAPTER PLATE 10.00" D1-6 CAM-LOCK

USED MACHINED CAST IRON CHUCK ADAPTER PLATE 10.00" D1-6 CAM-LOCK

  • Millstadt, Illinois, United States
  • Mar 1st
NEW Steelex M1057 3 Jaw Chuck 4-Inch

NEW Steelex M1057 3 Jaw Chuck 4-Inch

  • United States
  • Mar 1st
CUSHMAN REF NO 5340B 3 JAW 5" SCROLL CHUCK 4 SOUTH BEND 9 10K LATHE 1 1/2" x 8

CUSHMAN REF NO 5340B 3 JAW 5" SCROLL CHUCK 4 SOUTH BEND 9 10K LATHE 1 1/2" x 8

  • United States
  • Mar 1st
T-Handle Pull dowels (4sizes) tool an die

T-Handle Pull dowels (4sizes) tool an die

  • Bronson, Florida, United States
  • May 10th
Unidex Lifting Arm Lifter Manipulator Unused

Unidex Lifting Arm Lifter Manipulator Unused

  • New Berlin, Wisconsin, United States
  • May 10th
ROTHFUSS TOOL CO. G2 ANGLE DRESSER AND TOOL HOLDER

ROTHFUSS TOOL CO. G2 ANGLE DRESSER AND TOOL HOLDER

  • Livonia, Michigan, United States
  • May 11th
SUBURBAN TOOL 6 inch SINE PLATE

SUBURBAN TOOL 6 inch SINE PLATE

  • Durham, North Carolina, United States
  • May 26th
Suburban Angle Vee Step Block with accessories!

Suburban Angle Vee Step Block with accessories!

  • Durham, North Carolina, United States
  • May 26th
Tool Block

Tool Block

  • Plano, Illinois, United States
  • May 26th
NNB-CAMCO TORQ-GARD Flange Mount Overload Clutch (Model 40D) Torque 1750 in/lb

NNB-CAMCO TORQ-GARD Flange Mount Overload Clutch (Model 40D) Torque 1750 in/lb

  • Albion, New York, United States
  • May 26th
NNB-CAMCO TORQ-GARD Flange Mount Overload Clutch (Model 40d) Torque 400 in/lb

NNB-CAMCO TORQ-GARD Flange Mount Overload Clutch (Model 40d) Torque 400 in/lb

  • Albion, New York, United States
  • May 26th
CAMCO 12 Step/Position Rotary Index Table (Model 601RDM12H24-270) 00172939

CAMCO 12 Step/Position Rotary Index Table (Model 601RDM12H24-270) 00172939

  • Albion, New York, United States
  • May 26th
EXTRA PALLET FOR MATSUURA HP300 - BRAND NEW

EXTRA PALLET FOR MATSUURA HP300 - BRAND NEW

  • Sudbury, Massachusetts, United States
  • May 30th
Fitz Rite CAT 50 TG 100 Collet Chuck 5.5" PRO 50C 10 55 (LOC515)

Fitz Rite CAT 50 TG 100 Collet Chuck 5.5" PRO 50C 10 55 (LOC515)

  • Laingsburg, Michigan, United States
  • May 30th
Fitz Rite CAT 50 TG 100 Collet Chuck 5.5" PRO 50C 10 55 (LOC514)

Fitz Rite CAT 50 TG 100 Collet Chuck 5.5" PRO 50C 10 55 (LOC514)

  • Laingsburg, Michigan, United States
  • May 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies