+ Post new Ad
Hardinge CHNC 1/2" Tool Turrets ***WITH*** Several Assorted Tool Holders, US $680 – Picture 0
Hardinge CHNC 1/2" Tool Turrets ***WITH*** Several Assorted Tool Holders, US $680 – Picture 0

Hardinge Chnc 1/2" Tool Turrets ***with*** Several Assorted Tool Holders

US $680

  • Oxford, Massachusetts, United States
  • Jun 11th
Open on mobile:
QR code
Available are 9 Hardinge CHNC turrets for 1/2" tools - most include several various Hardinge tool holders mounted to the turrets. ONLY 4 LEFT - CURRENT PICTURE SHOWS REMAINING LOT There are 3 octagonal turrets and 1 square turret - All are in great condition, just a little dusty - no rust. Buy one or make an offer for all of them.

Directions

Similar products from Fittings & Plates

TTC Magnetic Sine Plate-Model:CENTER DISTANCE OF ROLLS:5'' within .0002''

TTC Magnetic Sine Plate-Model:CENTER DISTANCE OF ROLLS:5'' within .0002''

  • Duncan, South Carolina, United States
  • Jun 11th
TTC Magnetic Sine Plate-Model:CENTER DISTANCE OF ROLLS:3''within .0002''

TTC Magnetic Sine Plate-Model:CENTER DISTANCE OF ROLLS:3''within .0002''

  • Duncan, South Carolina, United States
  • Jun 11th
PHASE II Horizontal/Vertical 5C Collet Indexe

PHASE II Horizontal/Vertical 5C Collet Indexe

  • Duncan, South Carolina, United States
  • Jun 11th
PHASEII Optional Tailstock Interchangeable With Yuasa

PHASEII Optional Tailstock Interchangeable With Yuasa

  • Duncan, South Carolina, United States
  • Jun 11th
TTC CNC H/V Toolholder Fixture - TAPER: CAT 40

TTC CNC H/V Toolholder Fixture - TAPER: CAT 40

  • Duncan, South Carolina, United States
  • Jun 11th
PHASE II 5C Spin Index Fixture

PHASE II 5C Spin Index Fixture

  • Duncan, South Carolina, United States
  • Jun 11th
TTC Precision Ground Angle Plate - MODEL #: CPG-8 DIMENSIONS: 8'' x 8'' x 8''

TTC Precision Ground Angle Plate - MODEL #: CPG-8 DIMENSIONS: 8'' x 8'' x 8''

  • Duncan, South Carolina, United States
  • Jun 11th
TTC Machined Angle Plate - MODEL #: CPM-8 DIMENSIONS: 8'' x 8'' x 8''

TTC Machined Angle Plate - MODEL #: CPM-8 DIMENSIONS: 8'' x 8'' x 8''

  • Duncan, South Carolina, United States
  • Jun 11th
45.25" x 18-7/8" x 5.5" Steel Welding T-Slotted Table Cast iron 5 SLOT

45.25" x 18-7/8" x 5.5" Steel Welding T-Slotted Table Cast iron 5 SLOT

  • Grand Rapids, Michigan, United States
  • Jun 11th
48.75" x 14" x 4" Steel Welding T-Slotted Table Cast Iron 3 SLOT

48.75" x 14" x 4" Steel Welding T-Slotted Table Cast Iron 3 SLOT

  • Grand Rapids, Michigan, United States
  • Jun 11th
Hardinge 5C Step Collet Flanges

Hardinge 5C Step Collet Flanges

  • Oxford, Massachusetts, United States
  • Jun 11th
Tombstone Welded Aluminum 2" plate 500mmx500mm 19.7 x 19.7 x 30.5

Tombstone Welded Aluminum 2" plate 500mmx500mm 19.7 x 19.7 x 30.5

  • Novi, Michigan, United States
  • Jun 11th
Tombstone Welded Aluminum 2" plate 500mmx500mm 29.5 x 15.25 x 6

Tombstone Welded Aluminum 2" plate 500mmx500mm 29.5 x 15.25 x 6

  • Novi, Michigan, United States
  • Jun 11th
Tombstone Welded Aluminum 2" plate 500mmx500mm 15 x15 Cross Sec. 29.5" (tall)

Tombstone Welded Aluminum 2" plate 500mmx500mm 15 x15 Cross Sec. 29.5" (tall)

  • Novi, Michigan, United States
  • Jun 11th
Tombstone steel base 2" plate 500mmx500mm 11.75 x 11 x 21.75

Tombstone steel base 2" plate 500mmx500mm 11.75 x 11 x 21.75

  • Novi, Michigan, United States
  • Jun 11th
Tombstone City steel base 2" plate 500mmx500mm 19.5 x 8 x 25.75

Tombstone City steel base 2" plate 500mmx500mm 19.5 x 8 x 25.75

  • Novi, Michigan, United States
  • Jun 11th
SUBURBAN TOOL URA-030405 UNIVERSAL RIGHT ANGLE IRON CAST IRON GROUND FINISH

SUBURBAN TOOL URA-030405 UNIVERSAL RIGHT ANGLE IRON CAST IRON GROUND FINISH

  • Homer City, Pennsylvania, United States
  • Jun 11th
PLASMA CAM 4x4 Grid Grates X and Y Slats CNC Plasma Cutter - SAVE $ - Read Ad

PLASMA CAM 4x4 Grid Grates X and Y Slats CNC Plasma Cutter - SAVE $ - Read Ad

  • Charlotte, North Carolina, United States
  • Jun 11th
15" X 6 1/4" Adjustable Sine Plate - Excellent Condition

15" X 6 1/4" Adjustable Sine Plate - Excellent Condition

  • Wilmette, Illinois, United States
  • Jun 11th
57"X73"X10" THICK T-Slot Table Cast Iron Layout Plate Fixture

57"X73"X10" THICK T-Slot Table Cast Iron Layout Plate Fixture

  • New London, Ohio, United States
  • Jun 11th

People who viewed this item also vieved

Matched Cast Iron Vee Blocks (Inv.2614)

Matched Cast Iron Vee Blocks (Inv.2614)

  • Portland, Connecticut, United States
  • Jan 30th
Machinist 1 2 3 Block Set of 2 Nice condition o major scars

Machinist 1 2 3 Block Set of 2 Nice condition o major scars

  • Staunton, Virginia, United States
  • Jan 30th
IMPORT 637-7030 1/8" x 1/2" - 1-5/8" x 6" Matched Pair Precision Parallel Set 1M

IMPORT 637-7030 1/8" x 1/2" - 1-5/8" x 6" Matched Pair Precision Parallel Set 1M

  • Saint Louis, Missouri, United States
  • Jan 30th
RITEN LIVE CENTER 3MT #48603

RITEN LIVE CENTER 3MT #48603

  • Wadley, Alabama, United States
  • Jan 30th
NEW UNUSED MT1 WORK ARBOR TOOL HOLDER ATLAS CRAFTSMAN 6" 618 LATHE MORSE TAPER 1

NEW UNUSED MT1 WORK ARBOR TOOL HOLDER ATLAS CRAFTSMAN 6" 618 LATHE MORSE TAPER 1

  • Danville, New Hampshire, United States
  • Jan 30th
5c Hardinge Headstock Male Center (solid body)

5c Hardinge Headstock Male Center (solid body)

  • Rochester, New York, United States
  • Jan 30th
Cushmen Chuck Jaws (2) 1&4 Model#-8216C

Cushmen Chuck Jaws (2) 1&4 Model#-8216C

  • Brooksville, Florida, United States
  • Jan 30th
82" Over Size Bullard VTL Surface Face plate Chuck Vertical turret lathe table

82" Over Size Bullard VTL Surface Face plate Chuck Vertical turret lathe table

  • New Britain, Connecticut, United States
  • Jan 30th
Vintage Wolf Jahn Germany 6 Jaw Jeweler Watch Maker Lathe Chuck

Vintage Wolf Jahn Germany 6 Jaw Jeweler Watch Maker Lathe Chuck

  • Anderson, California, United States
  • Jan 30th
5000 psi 1-Phase Pump w/ Controls for SA Circuits - Enerpac Vektek Hytec

5000 psi 1-Phase Pump w/ Controls for SA Circuits - Enerpac Vektek Hytec

  • Lake Villa, Illinois, United States
  • Jan 30th
4" TE-CO Adjustable Toe Clamp Set

4" TE-CO Adjustable Toe Clamp Set

  • Miami Beach, Florida, United States
  • Jan 30th
Lot of 3 Micrometers: 2 Brown & Sharp & 1 Starrett

Lot of 3 Micrometers: 2 Brown & Sharp & 1 Starrett

  • Glastonbury, Connecticut, United States
  • Jan 30th
COMMAND C4C4-1000 CAT 40 COLLET HOLDER 14316-003

COMMAND C4C4-1000 CAT 40 COLLET HOLDER 14316-003

  • West Palm Beach, Florida, United States
  • Jan 30th
LAST ONE! USED BIG-DAISHOWA BT40 NBN-10 NEW BABY COLLET CHUCK BHDT-90018

LAST ONE! USED BIG-DAISHOWA BT40 NBN-10 NEW BABY COLLET CHUCK BHDT-90018

  • Fairfield, Iowa, United States
  • Jan 30th
Lyndex Nikken K1 1/4-SK10-150 staight shank collet chuck holder for SK10 collets

Lyndex Nikken K1 1/4-SK10-150 staight shank collet chuck holder for SK10 collets

  • Fort Lauderdale, Florida, United States
  • Jan 30th
Lathe 5C Collet Closer

Lathe 5C Collet Closer

  • Hallandale, Florida, United States
  • Jan 30th
COLLET #22 BALLAS 3/4 ROUND FOR AUTOMATICS & SCREW MACHINES #6582

COLLET #22 BALLAS 3/4 ROUND FOR AUTOMATICS & SCREW MACHINES #6582

  • Resaca, Georgia, United States
  • Jan 30th
ERICKSON 75TG0750 Collet

ERICKSON 75TG0750 Collet

  • Grand Ledge, Michigan, United States
  • Jan 30th
Hainbuch PP 100 Pneumatic PP type Changing Fixture

Hainbuch PP 100 Pneumatic PP type Changing Fixture

  • Middlebury, Indiana, United States
  • Jan 30th
1999 Escomatic NM 640 Coil Fed Swiss CNC Machine

1999 Escomatic NM 640 Coil Fed Swiss CNC Machine

  • KENGERI, KARNATAKA, India
  • Jan 30th
Steel V Block 3-1/2 x 3-3/4 x 3-1/4 (Inv.31613)

Steel V Block 3-1/2 x 3-3/4 x 3-1/4 (Inv.31613)

  • Portland, Connecticut, United States
  • Jan 30th
NIKKEN CNC-321TF Rotary Table and Controller

NIKKEN CNC-321TF Rotary Table and Controller

  • Chatsworth, California, United States
  • Jan 30th
NIKKEN CNC-401T Rotary Table and Controller

NIKKEN CNC-401T Rotary Table and Controller

  • Chatsworth, California, United States
  • Jan 30th
Tsudakoma RNCV-201 R Rotary Table

Tsudakoma RNCV-201 R Rotary Table

  • Chatsworth, California, United States
  • Jan 30th
Swivel Base for Milling Machine Vise Its 13/12

Swivel Base for Milling Machine Vise Its 13/12

  • Van Nuys, California, United States
  • Jan 30th
PALMGREN No 250 MACHINIST / DRILL PRESS VISE!

PALMGREN No 250 MACHINIST / DRILL PRESS VISE!

  • Sacramento, California, United States
  • Jan 30th
USED KURT MANUAL CLUSTER TOWER TOMBSTONE VISE Model II - 400mm Pallet

USED KURT MANUAL CLUSTER TOWER TOMBSTONE VISE Model II - 400mm Pallet

  • Emporia, Kansas, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies