Conduit Bender Hand Enlarged foot pedal. 3/4 Inch EMT and 1/2 Inch Rigid Made of Aluminum Includes embossed sight arrows for 10, 22.5, 30, 45, 60 and 90 degrees. Holds conduit steady as it is bent.
Nothing to alter, no master jaws required Applications Uses standard low head screws. Slide out/in with 1/4 turn of Allen wrench. Features All soft snap jaws are blanchard ground.
This is a two piece aluminum mold 3.3" long and 2" in diameter designed to mounted in a vise to produce a lead hammer head. The finished hammer head will be 1 1/8" diameter x 1 1/4 diameter in the middle and will be 2" overall length. The mold has been CNC machined from Aluminum and is fitted with a side hole for a 1/2" diameter handle.
Please see my other listings- lots more Ridgid pipe wrenches, proto/plomb/lobster adjustable wrenches, irwin vise-grips, etc..... Pair of Ridgid aluminum handle offset head wrenches in good functional shape but do show some wear/tear/grease/grime/etc.... as shown in pictures.
LARGE VISE THAT HAS BEEN REFURBISHED, THIS HAS BEEN COMPLETLY TORN DOWN AND SAND BLASTED AND HAS HAD A HAMMERED FINISH PAINT APPLIED, FROM THE MAKER OF KILZ. SOME IMPERFECTIONS IN CASTING. THE VISE JAWS MEASURE 5" AND WILL OPEN UP 3 3/4" THE HEAD WILL ROTATE 360 DEGREES AND ALSO HAS A PIPE VISE INCLUDED ON IT.
This blade with 45 degrees on one end and 30 - 60 degrees on the other is in very good condition. It is hardened and measures .078 thick by 4 7/8 long. Unfortunatly there is no manufacturers name on it.
3D printer nozzle head cleaner (Bits and Tool) THE BITS: 10pc (2 each) .2mm .25mm .3mm (1each) .35mm .4mm .45mm .5mm These Micro-drill bit Extruder Nozzle Cleaners are an essential item for any 3D printer owner. Every extruder nozzle must be cleaned out from time to time. These nozzles are very difficult to clean properly.
Offered for sale is a Scotchman CPO 350LT manual cold saw. This saw is currently still in service, has only seen minimal use, and is in very good used condition. These are nearly twice the price new, so this offers a great opportunity to purchase without having to buy new.
Up for bid: Ridgid Pipe Threader as follows: # OOR 5 dies - 1/4" - 3/8" - 1/2" - 3/4" and 1" All dies heads and dies are in excellent condition - no broken or chipped teeth. Comes with ratchet and 16" handle.
For Miniatures, Modeling, Jewelry, Precision Carvings, Plastics,Watch Repair .. .2mm .3mm .4mm These uses and more... Hand cleaning the nozzle head to your 3D printer Small scale miniatures Dollhouse Miniatures Modeling: Cars, Trucks, Trains .....
THE NOZZLES: 1 each: 0.2mm, 0.3mm, 0.4mm J-Head Print Head nozzle for 1.75mm filament ABS/PLA printers These are high quality brass nozzles. We also sell them in kits with the drill bits to clear them out and a bit holding pin-vise tool.
3D printer accessories 0.2mm 0.3mm 0.4mm Jhead Nozzles Brass Quality Print Head restore jammed clogged poor print quality solution THE NOZZLES: 1 each: 0.2mm, 0.3mm, 0.4mm J-Head Print Head nozzle for E-3D and other 1.75mm filament ABS/PLA printers These are high quality brass nozzles. We also sell them in kits with the drill bits to clear them out and a bit holding pin-vise tool.
3D printer accessories 0.3mm 0.4mm 0.5mm Jhead Nozzles Brass Quality Print Head restore jammed clogged poor print quality solution THE NOZZLES: (1qty) 0.3mm, (2 qty)0.4mm, (1qty)0.5mm J-Head Print Head nozzle for 1.75mm filament ABS/PLA printers These are high quality brass nozzles. We also sell them in kits with the drill bits to clear them out and a bit holding pin-vise tool.
3D printer accessories 0.5mm Jhead Nozzles Brass Quality Print Head restore jammed clogged poor print quality solution THE NOZZLES: 3qty: 0.5mm J-Head Print Head nozzle for 1.75mm filament ABS/PLA printers These are high quality brass nozzles. We also sell them in kits with the drill bits to clear them out and a bit holding pin-vise tool.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
