head jamb for sale, brand-new and used.

BEA Jamb 304 Stainless STEEL 115 VAC HANDICAP PUSH BUTTON 1-1/2in. x 4-3/4in. 10PBJ1

This is a Fairchild Industrial Products Company multi-stage pressure regulator. It is a model 80B. The handle was removed and a bolt head ground to fit the clearance needs of the machine it was fitted to.

Norfield Double End Trim & Miter Model: 1020 Serial: TS1047 KDF 1-1/2' - 8' Cap. Adjusts by hand crank, 3-1/2" max. Width & 3/8" - 1-1/2" thickness; straight 90 degrees cut or 45 degree miter cut, allows for 0 degree - 10 degree undercut angle, w/(2) 10" dia.

DBCI 650 mini series roll up door. Comes with all the brackets,tracks, and hardware needed for installation. Comes with either inside or outside locks (Customer must specify) .

Drop Plate For Hinge Mount Door Closers Drop Plates are used to drop mount door closers where head frame space is limited.

Drop Plate For Hinge Mount Door Closers Drop Plates are used to drop mount door closers where head frame space is limited.

90 Series Heavy-Duty Glynn-Johnson 90 series holders and stops are the most rugged models available for heavy-duty applications. The channel is surface-mounted to the door, most often with sex bolts, and the jamb bracket is surface mounted to the jamb, requiring minimal door and frame preparation. These versatile units can be used in conjunction with most surface-applied door closers.

Drop Plate for Hinge Mount for 1460 Series Door Closers Drop Plates are used to drop mount door closers where head frame space is limited. Since its founding in 1926, LCN has specialized in solving door control problems through the use of high quality, innovative door control products. By adhering to high standards of performance, LCN has earned a leadership role within the industry

Drop Plate for Hinge Mount for 1460 Series Door Closers Drop Plates are used to drop mount door closers where head frame space is limited. Since its founding in 1926, LCN has specialized in solving door control problems through the use of high quality, innovative door control products. By adhering to high standards of performance, LCN has earned a leadership role w

LCN Door Closer SUPER SMOOTHEE 4040XP 18G Drop Plate 4040-18G DARK BRONZE Finish For 4040/4040XP series closers. Locates top jamb mounted closer flush with top of head frame face in flush ceiling condition. Plate requires 1-3/4” minimum head frame.

SUPER SMOOTHEE Model 4040-18TJ DOOR CLOSER PLATE ONLYThis is "Installation Accessory" for a SUPER SMOOTHEE Heave Duty Door CloserThis is the plate only; NO hardware or instructions. Missing original manufacturers packaging. PLATE, 4040-18TJCenters top jamb mounted closer vertically on head framewhere face is less than 3 1/2” (89 mm).

REINFORCING PIVOT HINGE 0253 2C NON-HANDED 4 1/2 x 4 1/2 hinge MACHINE SCREWS 1/4 -20 x 3/4 FLAT HEAD (8) WOOD SCREWS #14x 1 1/2 FLAT HEAD (8) 1/4 -20 SEX BOLT (2) INSTALLATION INSTRUCTION INCLUDED FOR PIVOT (NON-HANDED) RIGHT HAND OR LEFT HAND SUPPORT WEIGHTS UP TO 300LB Provide increased reinforcement at the corner of the door jamb where stress can occur. Full surface reinforcing hinges can be added to door troubled by sagging.

Hager BB1270, Half Surface Swing Clear, 5 Knuckle Ball Bearing Heavy Weight Hinge. Includes 5--1/4 - 20 x 2' flat head machine screws with grommet nut for thru bolting and 4 -- 10 - 24 x 1/2" flat heads for jamb. These hinges swing out and away from the opening to provide ample clearance while swinging clear of protrusions such as brick mold, etc..