Heat-set Insert Tips For M2 M2.5 M3 M4 And M5 Inserts. Compatible With Hakko ...

US $35.41

Phoenix, AZ, United States
Aug 30th

Open on mobile:
QR code

Heat-Set Insert Tips for M2, M2.5, M3, M4, and M5 Inserts. Compatible with Hakko FX-888D and Weller SP40NKUS Irons Used for Connecting 3D Printed Parts. Designed and manufactured in the USA. The original long shank tip for the Hakko FX888D iron. If you see others with these shapes not made by Virtjoule, they are copy cats. Longer shank than other tips allows you to reach deeper into 3D printed parts and tight corners to install heat-set inserts without touching your iron and melting the plastic. Installation tip works better than soldering iron tip since conical tips can catch on the insert and accidentally pull the insert out while melting the plastic and ruining the part. Tip sizes include M2, M2.5, M3, M4, and M5. M2.5 is a popular hole size for Raspberry Pi circuit boards. M3 is a popular size for Arduino circuit boards. Compact tip cradle included to keep them together when they're not being used. Wide size range gives you lots of flexibility to choose the right insert for your 3D printing project. Heat set inserts are a great way to improve connection strength between 3D printed parts. However, if you have tried to set heat-set inserts in your plastic or 3D printed part with your soldering iron, you may have had the frustration of pushing the insert in only to have it come right back out stuck to your soldering iron and ruining your part in the process. Most soldering iron tips can catch on the rim of the insert causing it to stick on the iron when you pull the iron out. If you use the "horizontal method" it's hard to know the insert is straight. Virtjoule's insert tips have a vertical wall that solves that problem. The iron pulls right out after pressing the hot insert. Because the shoulder is square it's easier to know if the insert is square in the piece, something that's harder to control with a conical soldering tip. The shank is much longer (0.75") and narrower than what you get with insert tips (only 0.25" long), allowing you to set small inserts into corners of parts without melting the side of the part. This is especially useful if you're mounting a circuit board in a 3D printed box or doing a mounting that requires the insert to come close to the edge of the part. Compatibility with Hakko FX-888D irons and Weller SPS40NUS. These tips are 1.6" (40 mm) long with the tip portion about 0.75" (19mm). There is a 5/32" internal cavity for ceramic heaters. On Weller irons that have a 1/4" cavity and set screw, the 1/4" shank can be extended as far as the set screw will allow. On Hakko FX888D irons, the 0.75" is the reach with 1/4" clearance. Five tips included for sizes M2, M2.5, M3, M4, and M5. **Not tested with every possible soldering iron. Not all Wellers have 1/4" barrels, so measure yours first. Will not fit the Weller WES51 iron. ** If you have a Weller WES51 iron, search ASIN: B07GNX86BB for a compatible tip. Designed, manufactured, and continuosly improved in the USA. Shipping We offer FREE shipping on all orders! We ship within Three business days of payment, usually sooner. We use a selection of shipping services such as UPS, FedEx, USPS etc. We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed. Local pickups and combined shipping options are not provided at this time. Return You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Payment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Feedback Customer satisfaction is very important to us. If you have any problem with your order, please contact us and we will do our best to make you satisfied. Contact Us If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays. Please visit our eBay store to check out other items for sale! Thank you for shopping at our store.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Size	M2, M2.5, M3, M4, M5
Model	Does not apply
Color	Brass
Brand	Virtjoule
MPN	Does not apply
UPC	Does not apply
EAN	Does not apply