hex washer for sale, brand-new and used.

Welcome to my site! Up for sale is an Original Compound Gear Bushing, Sleeve, Washer, Hex Nut, and Bolt for a 6" Sears Roebuck Model #101.07301 Metal Lathe There is some information on the internet about this specific lathe model. I found the following information at the internet site: lathes.co.uk/atlas6inch/ "Styled to closely resemble its larger brother, the "10-inch", the Atlas 'Model 618' 6" x 18" (3.5" centre height)

Lot of 4pc - New J&S Model #101BDouble Action Jaw - Edge Clamp P/N 20102Dimensions 3/4"H x 1-1/2"W x 3-3/8"OALTapered Slot For 1/2" Or M12 SCHSClamping Range Stroke From AOL +/- 1/8"Adjustment Screw 1/2" With 1/4" HexTorque (Lbs In) = 620Clamping Force (Lbs) = 1000Includes Washer For Hold Down Bolt andAluminum Nose Cover For Clamping On Finished Work Peices J&S Tool is hard to be beat when it comes to power holding, low profile design, and dependability. Only one adjusting screw provid

Untitled Document (1 pcs) Flange Nuts 3/4" M20 Hexagon Nuts Hex Nut

Untitled Document (1 pcs) Flange Nuts 3/4" M20 Hexagon Nuts Hex Nut

Untitled Document 1pcs Flange Nuts 5/8" M16 Hexagon Nuts Hex Nuts Cl

Untitled Document Flange Nuts 1/2 inch M12 Hexagon Nuts Hex Nut Cla

Untitled Document Black Finish Flange Nuts 1/2" M12 Hexagon Nuts Cla

FastBack Interchange System Based around the patented FastBack Bolt, this quick-change system allows the jaw to be changed in 3 strokes! This greatly increases productivity by reducing vise change setup time. rnrn The jaws change easily without opening the vise or fastening bolts mo

The Hydramax Workholding System The Hydramax Workholding System is designed to allow multiple parts, with variations in size to be secured in a Kurt vise simultaneously. Problems usually associated with attempting to hold multiple parts in one vise are virtually eliminated. Save time and money without the hassles of broken cutters, scraped parts, or damaged fixtures.

The Hydramax Workholding System The Hydramax Workholding System is designed to allow multiple parts, with variations in size to be secured in a Kurt vise simultaneously. Problems usually associated with attempting to hold multiple parts in one vise are virtually eliminated. Save time and money without the hassles of broken cutters, scraped parts, or damaged fixtures.

The Hydramax Workholding System The Hydramax Workholding System is designed to allow multiple parts, with variations in size to be secured in a Kurt vise simultaneously. Problems usually associated with attempting to hold multiple parts in one vise are virtually eliminated. Save time and money without the hassles of broken cutters, scraped parts, or damaged fixtures.

The Hydramax Workholding System The Hydramax Workholding System is designed to allow multiple parts, with variations in size to be secured in a Kurt vise simultaneously. Problems usually associated with attempting to hold multiple parts in one vise are virtually eliminated. Save time and money without the hassles of broken cutters, scraped parts, or damaged fixtures.

Advanced Industries Pressure Control Assembly 110 4930-00-855-8739 - NOS New, old stock. Unit has storage wear, tape, markings, and patina from US Military storage. Minor tear in rubber pump prime bulb.

(Blue) Makerbot Replicator 1 & 2 Extruder Upgrade, Thingomatic w/MK7 Extruder - Delrin Plunger Replacement: I had real problems using the delrin plunger system so I purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). I redesigned a similar upgrade and use a heavier and stiffer spring then what I originally was using.

(Red) Makerbot Replicator 1 & 2 Extruder Upgrade, Thingomatic w/MK7 Extruder - Delrin Plunger Replacement: I had real problems using the delrin plunger system so I purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). I redesigned a similar upgrade and use a heavier and stiffer spring then what I originally was using.

MITEE-BITE FIXTURE CLAMPS MB-2 SCREW #8-32 MAX HOLD 205 lb Thread Length 3/8" Employs Simple "Cam Action" For Fast, Strong Clamping While Milling & Drilling Applications

Clave DynastyThis RPI AMH019 Mounting & Connecting Hardware has never been used. Our Company took over another persons business and this was part of their unused stock. Item De

15amp Decora Duplex Receptacle – Residential Grade Features