high pressure coolant pump for sale, brand-new and used.

New never run Generator. Kubota 4 Cycle Water Cooled Engine 1,800 RPM Operation for Long Life and Quiet Performance Single Bearing Generator Brushless Rotating Field Exciter Generat

7500 ONAN Quiet Diesel Generator Set ~~** Hours accurate (in pic) as of 01-12-15 at approx. 4pm (CST) ~~**~~3-cylinder diesel engine Permanent magnet alternator Digital voltage regulation - no adjustments required

This is a set of two books one is in English and the other is in sections by language (several different languages). Maybe French, German, Arabic. I am not sure on the other languages.

Gusher Model MSC4-7-500FJ-CDM-A High Pressure Coolant Pump Baldor 5 HP Electric Motor 3450 RPM

Features and benefits • Dramatically lower noise, vibration, harshness (NVH) • Up to 15 dB(A) quieter than conventional diesel generator sets • Load-matching, variable speed operation

HYDRA-CELL PUMP D10ELCGHFECA w/ BALDOR MOTOR CM36151 Used. takeout from MAKINO A55. Removed when machine was installed to new owner.

One (1) Preowned Dake/Johnson (Chun Jei) Model CB-330W Automatic Horizontal Band Saw, S/N CJ-331035 (New Approx. 11/2001) This is a fully-automatic horizontal band saw with hydraulic shuttle vise and adjustable clamping pressure.

SPECIFICATIONS CNC CONTROL: FANUC 18-T MAIN SPINDLE: BAR CAPACITY, RD.: 1

KNOLL HIGH-PRESSURE COOLANT SCREW PUMP KTS32-76-T5-A-G-KB. KTS32-76:PSI-GALS/MIN;150-26.4, 300-24.3, 400-22.4, 600-21.1, 750-20.1, 900-18.7, 1000-17.7, 1150-16.9. KTS32-76:PSI-HP;150-6.4, 300-8.9, 400-11.3, 600-14.5, 750-17.7, 900-20.9, 1000-24.1, 1150-27.4.

1999 Hitachi Seiki VM III Vertical Machining Center with 2 Pallet Changer

14" X 21" DOALL TF14HA TILT FRAME VERTICAL BAND SAW w/Auto Shuttle Table New Approx. 1980 / Model: TF-1421HA S/N: 365-86228 Electrical Schematic Number: 505364-1 Hydraulic Schematic Number: 505352-9 Capa

USED- SEE PHOTOS FREE SHIPPING! Product Details Suitable for high flow, low head height, low pressure, and solids handling capability with fewer clogs. Pump provides a high flow rate per watt for energy-efficient continuous operation, and is safe for fish and plants.

AGE: 1994 SPECIFICATIONS: Capacity: 18" x 20" High @ 90 Degrees 18" x 11-1/2" H Left, 13-1/2" H Right @ 45 Deg Blade Size: 1-1/4" Blade Speed (Variable): 60 - 400 FPM Column Tilt: +/- 45 Deg EQUIPPED WITH: Hydraulic Blade Tension Variable Feed Pressure Manual Hydraulic Feed Shuttle Table w/Hydraulic Vise Manual Miter Head Tilt Adjustment Manual Chip Conveyor (1) Stationary Saw Table Hydraulic Material Vise Hyd.

INSTANT DENTAL PRACTICE - ANYPLACE For the traveling Dentist we offer this DNTLworks 2600 PROcart 1 & ADEC Porta-Chair. All reports were these are in good working condition. That being said I do not know how to test the unit under working conditions so am offering as pictured in as-is condition.

I have a John R. Hollingsworth model MEP-004A 15kWh military diesel generator with 742 hours on it and sitting on a 1980 M201A1 trailer made by Utility Tool & Body Co. for sale.

Serial Number: 460-97183 MODEL NUMBER: TF-2021 NC SPECIFICATIONS: Automatice Feed, Programable. 1/2" to 24" will Multiple Index, Up to 99 Jobs with 9 Sequences per Job: Includes Job #, Length of Cut, # of Cuts, Angle Tilt Frame, Programable - Left or Right Automatic Crop Cut & Auto Kerf Compensation Saw Blade: 192" x 1 1/4" x .042" Thk. Variable Band Speed: 50 to 300 FPM Variable Band Feed Pressure & Feed Speed Drive Wheels, Cast Iron: 20" Diameter Table Area: 38" x 36"