hose seal for sale, brand-new and used.

EATON Weatherhead Coll-O-Crimp 06U-A26 90 Degree Female Swivel Short Drop Tube Elbow Fitting, Low Carbon Steel, 3/8" Hose ID, 3/8" Tube Size.

Lot of 6 hydraulic fittings 3 top are parker 3 bottom are Gates. 1is 45deg 1" seal lock 2are 90deg 1" flare. 1 is 3/4" female flare.1 is 3/4" male flare.

Parker Crimp Hose End Fittings O-ring Flat Face Seal. These are all 90 degree that are generally used with 2 wire hydraulic hose. I am not an expert on Parker part numbers so I will list part numbers and also actual "dash size" numbers.

275 - 330 Gallon IBC Tote Tank FOOD GRADE DRAIN ADAPTER 2" FINE Thread (2"NPT) x GARDEN HOSE 3/4" (Absolutely NO Need For An Additional Brass Adapter To Adapt To Garden Hose fits: Ultratainer

This is a IBC tote tank adapter that goes on your tote valve and reduces it so any 3/4" hose can be slid onto the barb. Coarse 2" Female European thread. 3/4" hose barb on the other end.

Please read carefully description of auction in particular condition of item and shipping and contents of auction ( what in box section) If You don't agree with any terms please do not bid

Product Description Contractor-grade, industry-standard Fill-Rite pump has an explosion-proof motor with permanent magnet. Features built-in check valve and

Lightweight, portable, single phase submersible pumps are designed to handle water and solids. Built for the demands of construction, mining, municipality and farm applications. Oil lifter provides lubrication to seal faces during operation mimimizing the risk of seal failure due to overheating.

2" Tsurumi submersible pump with 25' hose. Good working condition. 

FIRE Hose Assembly NSN 4210-00-289-6123 1 1/2 IN 25 FT Long New. Stored by US Military. Box has minor shelf wear.

AAGR Cross-Sectional Shape Style Round AAJF

Fire Hose, 1-1/2" DIA x 50' L, Orange CROSS-SECTIONAL SHAPE STYLE ROUND

RARE STEEL 90-DEGREE CLAMP / ELBOW CLAMP MACHINIST TOOL CLAMPS 1/4" DIA PIPE/TUBING/HOSE/CABLE/TOOL/PART Used and in very good condition. Rare Steel 90-Degree Clamp for clamping 1/4" dia pipe / tubing / hose / cable / part / machine tool. And once clamped, you can secure this machine clamp tool using a bolt, cable or rope through the small 3/16" dia thru-hole, or secure the clamp into a vise or bigger clamp.

var arICImages7 = new Array(6); arICImages7[0]='http://d3d71ba2asa5oz.cloudfront.net/82000055/images/k47h027-1.jpg'; arICImages7[1]='http://d3d71ba2asa5oz.cloudfront.net/82000055/images/k47h027-2.jpg

Huge lot of instalok fitting with Black O-Ring seals Everything needed for commercial industrial vacuum system. used in the plastic pellet industry but also for central vacuum for anything needed lots of galvanized piping with fully welded 90 degree sweeps Approx 200' of metal tube run That you can have multiple takeoffs from and then there is another approx 200' of vacuum tubing with all the connectors to get it all hooked up Qty 7 2.50"Dia tube by 5' long Qty 2---------------