how to cut wire for sale, brand-new and used.

Steel Dragon Tools SDT 45207 Performance Ratchet Cable Cutter up to 1000MCM 500mm?(al) 750 MCM 400mm?(cu)

Hakko CHP TR-58 Medium Soft Wire Cutter, Chamfered Cut, 3.0mm Hardened Carbon Steel Construction, HRC 58, 21-Degree Angled Jaw, 8mm Jaw Length, 12 Gauge Maximum Cutting Capacity

Hakko CHP TRR-58-G Macro Soft Wire Cutter, Flush Cut, 3.0mm Hardened Carbon Steel Construction, HRC 58, 21-Degree Angled Jaw, 14mm Jaw Length, Wide Head, 10 Gauge Maximum Cutting Capacity

Hakko CHP-170 Micro Soft Wire Cutter, 1.5mm Stand-off, Flush Cut, 2.5mm Hardened Carbon Steel Construction, 21-Degree Angled Jaw, 8mm Jaw Length, 16 Gauge Maximum Cutting Capacity (2 Pack)

Hakko CHP TR-5000-PR Pro Macro Soft Wire Cutter, Tapered Head, Flush Cut, 5.0mm Hardened Carbon Steel Construction, 21-Degree Angled Jaw, 16 Gauge Max Cutting Capacity

Hakko CHP TR-5000-R Pro Macro Soft Wire Cutter, Flush Cut, 5.0mm Hardened Carbon Steel Construction, 21-Degree Angled Jaw, 14 Gauge Max Cutting Capacity

BRAND NEW IN SLEEVE Xuron

Aluminum Angle 3/4 x 3/4 x 24 in, 1/16 in thick Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed. They are slightly less than a 1/16 of an inch thick.

"Losing Your Signs too Quickly?" Dear Friend, Advertising is key for success of any business!

​"STOP Climbing That Ladder for Putting UP SIGNS...Get Sign Stapler!" One Tool For Hammering/Stapling/Hanging SIGNS Quickly and Easily Advertising is key for success for any business!

Aluminum Pro Channel 3/4 x 3/4 x 3/4 x 48 in, 1/16 in thick, .75 in Description – This is a special type of angle that was developed out of my solar panel business for the building of solar panels and eventually I realized other people had lots of other uses for them. How it works is that there are two 3/4 in channels riveted together. You can use the channel as is or, because it has layers, you can cut through one or both layers to create tabs that c

Description: • Synthetic glass (acrylic) polishing, Oxy-hydrogen generator is a machine using high temperature flame to make acrylic edge smooth and bright. • The heat polishing on the acrylic rough surface can be achieved as long as the flam